How to make claws from A4 sheet. Paper claws using origami technique

And now it’s time to tell you how to make paper claws with your own hands, in about five-plus minutes. These claws will come in handy for any carnival, especially if they are decorated correctly to match the color of the entire costume.

To begin with, I will show you a diagram for making claws, and then we will move on to step-by-step photo instructions.

The paper claws we make will be quite strong and sharp; as always, we will only need one sheet of paper per claw. Today I made five of them, just enough for one hand. It looks very beautiful and original. So let's get started with the craft:

We take a sheet of paper, signed as usual, so that they don’t think that the photos are stolen.

Out of habit, as in other paper crafts, we bend one corner of the sheet.

Then we bend the initially folded corner again so that the edges of the corners touch.

Now we bend the opposite side, as in the photo.

We turn the resulting triangle to the left and bend the left side like this.

Now we bend the right side of the triangle over the left, I showed you this stage of the craft in the photo from all sides.

Now we bend one corner inward so that the claw does not fall apart.

So our paper claw is ready.

I made five paper claws as promised.

Now I'll teach you how to put on these claws, just like that step by step photo instructions for you.

We look for a hole on the edge of the claw.

And we put our finger in there, initially it will be very difficult to enter there, but this is good, since it will not fall off.

This is what a dressed finger claw looks like.

And this is what claws look like when they are on all five fingers.

Now you know how to make paper claws with your own hands, you can just as easily make them. The craft is not difficult, good luck in your accomplice endeavors.

No costume for Halloween, theme party or school play is complete without eye-catching accessories and makeup. It is precisely carefully selected details that usually make up a memorable image, especially if it is associated with the universes of horror films.

But few people are interested in ordinary store-bought costumes, because all the coolest things are created with your own hands! And today we will look at several simple master classes for beginners, from which you will learn how to make claws out of paper.

This detail can complement many interesting costumes and become the terrifying highlight of the character. For example, sharp claws are an integral attribute of predators, dragons, Baba Yaga or even Wolverine. In this case, limitless imagination itself will lead you to the necessary image and ideas, but you will learn how to give it originality from the master classes below.

This MK is based on the very popular origami technique. To assemble such a craft, you will only need an A4 sheet of paper.

Step-by-step instructions on how to make origami paper claws yourself:

How to make cat claws using a video tutorial

An easy way to make long paper claws

Another master class designed for beginner handicrafts. Despite the fact that the implementation is very simple, these paper claws look very impressive.

Detailed instructions with claw assembly diagram:

Video tutorials on folding paper claws

You can make predator claws in a similar way. Step by step description You will find the creation process in the video tutorials:

To create other elements fancy dress you can also check out various photos and video lessons on origami techniques that will help you realize your wildest ideas.

Paper products can not only decorate the interior, but also have practical use. Scary origami claws are a great way to complete your Halloween costume. With their help, the image of Freddy Krueger or Wolverine will be similar to the original. Making paper claws is easy by following the instructions.

Paper product diagrams

This craft is suitable for beginners. It doesn't require much experience working with paper to make. Children will also find it interesting to make them. of different ages. To make origami claws, you will need paper and scissors. There is no need to glue the parts in the diagrams below.

The simplest technique for this product would be classic origami. Modular products will look interesting, but will be impractical to wear. They are best used as elements of other figures or as a decorative piece of furniture.

Method No. 1

For one sharp claw you will need one A4 sheet.

Place a sheet of paper with the short side facing up. Fold in the bottom right corner.
Now bend the lower sharp corner upward. We bend the right side of the product inward. You should get a figure like this.
We bend the resulting square in half diagonally. We position it with the top facing us. Fold it in half vertically (mark the center line and unfold). Bend the right corner along the line you made.
Fold this shape inward towards the left corner.
Bend the left corner onto the resulting figure from above. Tuck the corner of the left corner into the pocket.

This is how the long scary claws turned out. This scheme is suitable for children of primary school age.

For younger origami lovers, you should choose a simpler pattern or help them assemble it. Use the second method to make a paper product.

Method No. 2

For it you will need an A4 sheet. It needs to be cut into 4 equal rectangles. One rectangle 15 by 10.5 cm - one claw.

Place the paper with the short side facing up, turn the corner and make a square. It is from squares that this type of claw is made. The square is bent diagonally. Place the paper in a diamond shape in front of you. The marked line will be vertical. Fold the right side towards the line.
Fold the top corner behind the product (so that the fold lines match). This is what the element looks like from both sides.
Turn right side over. Fold the right side towards the center of the product. Turn the left side to the right and hide the corner in the pocket.

Simple origami claws are ready. For very young children, you can make claws from smaller squares. Introduce your child to the origami technique; he will be interested in preparing his own costume for a holiday at school or kindergarten.

And for tiger claws, use the video instructions. The product is suitable for the smallest fingers, but it is difficult to make from a photo.

By experimenting with the size of the starting elements, you can create small or long claws. Any thick paper will do. The most affordable is office, A4 or larger format. The product can be easily painted with gouache or other paints for greater realism.

Conclusion

The patterns for making paper claws are simple. They can be made by children from 5 years old and any adult. Most of the product diagrams are made using the classic origami technique. These claws are comfortable to wear and suitable for children's party or Halloween.

For long structures use glue or tape. This, of course, is no longer classic origami, but the result can please you. For naturalness, the product is painted in desired color. To make tiger claws, use the video instructions.

Video master class “Origami paper claws”

The origami technique involves not only decorative crafts like cranes or simple airplanes. Sometimes you can create something unusual and useful, for example, origami claws from paper. This craft will be an excellent inexpensive solution for carnival costumes on Halloween, New Year or children's performances. This is a great economical and visually effective option for Wolverine, Freddy Krueger, werewolf or vampire characters. Girls can also use such “crafts” in the images of a catwoman, witch or bird. Cosplayers can also use crafts if, instead of ordinary sheets, they use materials made of thick cardboard, impregnated fabric, even metal.

We will describe in detail several options for how to make origami claws from paper in the article.

General benefit

Crafts using the origami technique will brighten up family leisure time. The child will both watch the creation of his toy and will be able to accept Active participation. During collective work, children will be gladly involved in the overall process, which will create an atmosphere joint creativity and complicity. During school labor classes, children in the class will be happy to make such crafts. It develops fine motor skills, promotes concentration, develops accuracy and precision, cultivates creative, creative thinking. Such activities are useful among ordinary companies, as one of the entertainment elements at competitions or holidays.

Warning

• Bends and flaws during work, even after several attempts, are a natural phenomenon. It is recommended to wear gloves at first.
• The dimensions of the material in standard patterns may not always correspond to the dimensions of the fingers. Strive to find the best options during the creation process.

Option 1. Simple

This is an easy and economical option for creating claws. It is done extremely simply. Does not require special effort or skill. These claws will easily fit on a child’s fingernail. Children can do this origami preschool age, just beginning to comprehend the basics of this art. Such crafts will serve as a good addition to costumes for bears, wolves, foxes and other forest animals.

What you will need:

• A4 paper (sheet=4 fingers).
• Scissors.
• Flat, stable surface (table).

Instructions:

1. Take a sheet and fold it in half crosswise. This will divide it into four equal parts. Cut along the resulting folds.
2. We take the resulting small rectangle and measure a square in it. This can be done by bending one of the sides diagonally. Excess should be cut off.
3. We place the resulting square at an angle downwards towards us. This is how we get a rhombus.
4. Fold the right side to the fold and turn the workpiece over.
5. Fold the top corner down toward the center and turn it right side out again.
6. Bend the right side again towards the center line that appears.
7. Also tuck the left one and hide the corner in the resulting “pocket”
8. Straighten for volume. Make as many copies as needed for each finger.

Option 2. Complicated

This option requires more careful work and more material. One leaf is used for each claw. However, they are a more realistic option and fit more comfortably on your finger. Appearance such products are more impressive, and with proper processing of the details you can create more than just an image paper crafts. This accessory will make your hands the centerpiece of your suit.

Instructions:

1. Place the material with the smaller side facing you. Fold the lower right corner so that the bottom side of the sheet and the side are in contact, as when preparing a square.
2. We bend the resulting lower corner upward so that it touches the upper corner of the sheet.
3. We bend the uneven right part so that it touches the diagonal in the center.
4. Fold the resulting square along the diagonal center line.
5. Turn the resulting triangle with the larger side up. We mark the center line by folding it in half.
6. Fold the right side in half so that the right side of the triangle touches the center, and fold it to the left again.
7. We fold the remaining left side towards the center, simultaneously hiding the corner in the “pocket” of the right side.
8. Straighten it and put it on your finger.

Option 3. Composite claw

Manufacturing of this type claws moving away from classical technique and involves working according to templates. The basic principle of creation is twisting and connecting individual parts using other available means.

However, this “toy” has the most terrifying appearance. This is achieved due to the large length of each finger made. Suitable for images of folklore Russian characters, such as Baba Yaga or Koschey.

What you will need:

• Thick paper or cardboard.
• Scissors.
• Glue. A glue gun is best.
• Hard surface (table).

Instructions:

1. Let's create a template. To do this, we can take cardboard or fold a sheet of paper tightly, creating a model of a long narrow triangle. Make sure that the length of its base is not very short.
2. Having created a template, we trace and cut out parts from the assigned material.
3. We roll the resulting blanks into tight cones, but pay attention to the fact that your finger should fit well into their base. We secure the cones carefully with glue.
4. When the parts are dry, divide each cone into three equal parts using oblique cuts.
5. Connect the resulting parts at a slight angle. This will create the appearance of a curved toe.
6. Secure everything with glue.

Once the process has been done step by step with each of the 10 claws, their overall appearance can be improved by using gloves. To do this, put a rubber glove on your hand. The claws are pre-lubricated from the inside with glue and fixed on it. The same thing can be done with a cloth glove, the only difference is that instead of your fingers, pencils will be tucked in. Such a blank can be coated with paint on top and decorated with the necessary elements. This will give the product a more impressive and unique look.

Which boy hasn’t dreamed of having the attribute of some superhero, for example, fans of the Marvel multiverse with the well-known “X-Men”?

Thanks to the materials at hand, you can easily make your childhood dream come true even as an adult. Paper origami has reached such perfection that it is possible to make “weapons”, in particular, realistic Wolverine claws. Of course, a cardboard structure will not be able to match the strength of adamantium blades, but in terms of external qualities, with due diligence, it will not be inferior.

What you will need:

• Medium weight A4 paper (6 sheets).
• Narrow tape.
• Scissors

Instructions:

For blade:

• Place the sheet with the long side facing you. Bend it in half and straighten it, marking the center line.
• Mark in the same way and bend the bottom part from the center, but only so that 5 mm remains from the sheet line to the center fold line. Now we have the bottom line.
• Fold the very bottom to the bottom line. We fold the resulting bookmark two more times to the center line.
• We do the same thing on the other side.
• For the resulting narrow rectangle, fold the top edges toward the center to form a triangle.
• Fold the folds in again, creating an even thinner “point.”
• Iron the curves well so that the lines appear clearly. Straighten and cut the corners to the first folds.
• Bend back everything that remains along the fold lines of the “point”. Fold the sheet in half. Tape the bottom and cut edges together.
• For safety, slightly round the sharp part of the product. For canonicity, you need 3 of these blades per hand.

For the base:

• Starting from the corner, roll the A4 sheet into a tight tube. Secure the ends with tape.
• Tuck the edge of the resulting tube 3-4 times, creating a small “snail”. Secure it with tape.
• Make 2 more tubes in this way.
• Secure them at the base of the snails so that there are gaps between them for your fingers.
• Place the “blades” you have made onto the tubes. Secure them with tape at the base.

Use paint to decorate your crafts and make them unique. If you want to achieve the maximum effect, then aerosol cans with silver will successfully cope with this task if a denser material was used in the manufacture.

Fantasy can be expressed in different ways. For example, if you dream of learning how to make claws out of paper, this does not mean that you are crazy or bloodthirsty. Most likely, you just love comics, literature and cinema and want to transform into your favorite character. And if you are also a novice actor, then such an accessory as long and sharp claws will help you repeat without any problems image of Baba Yaga, Snake Gorynych, dragon or other fairy-tale hero. Just for such cases, there are many video and photo tutorials on the Internet on how to make paper claws for your fingers. This simple detail can become your incredible “trick”, and making such claws is not at all difficult. We invite you to familiarize yourself with simple circuits and master classes.

For the first method of making paper claws, we will use the popular origami technique. You will need 5 sheets of square paper. You can take white or colored paper, the main thing is that it is tight and your claws do not tear.

1. Fold the sheet in half diagonally and then unfold it.
2. Right and left ends of the sheet bend it towards the middle by about 45 degrees.
3. We get a triangle, which we fold in half.
4. Using the longest side of the triangle, we find the center and bend the lower part (Fig. 4).
5. Now we “wrap” the main part of the triangle with the lower part 2 times and hide the tip in the middle (Fig. 5-8).
6. We straighten the claw and try it on our fingers.

   How to make Wolverine's claws out of paper: transform into a superhero

   Perhaps one of the favorite characters of all boys is Wolverine. He is brave, strong-willed, and most importantly, immortal. Who wouldn't want to feel like a superhero like this? Unlike Freddy Krueger, Wolverine has only three pairs of claws, so you will have less work. Let's take a look small master class and finally, we’ll learn how to make Wolverine’s claws out of paper.
   

   You will need:

   • 6-10 sheets of A4 paper;
   • ruler;
   • bending tool.

   

   1. Place a sheet of paper vertically on a flat surface and bend the top right corner to the left until we get an acute angle and the top edge of the sheet is aligned with the left.
   2. We bend an acute corner to the main part of the sheet (the left corner of your sheet should coincide with the lower left corner). We bend the uneven edge that will protrude into the center. You can roll it into a square shape.
   3. Fold the resulting square diagonally to form a triangle. The right angle of this triangle should be pointing upward away from you.
   4. Find the 2 combined edges of the triangle, do not touch the separate 4 layers of the sheet for now.
   5. Fold a vertical line, formed from the top to the middle of the base of the triangle.
   6. Unfold the triangle, fold the edges into the center, and align along the fold. The folded corner should extend beyond the edges of the base of the triangle.
   7. Fold the resulting figure in half lengthwise, without losing the claw line.
   8. Fixing the form, turning the extreme corner inside the craft, and try on the finished claw.

   For more clear example We suggest watching a video instruction on how to make Wolverine's claws.

   How to make paper lynx claws: step-by-step master class

   And for girls it will definitely be useful to learn how to make lynx claws out of paper. The manufacturing process for this accessory is much simpler than the previous one. And the claws themselves turn out graceful and beautiful, like those of a real predator.
   

   Right now we will tell you how to make spectacular paper claws step by step. Get ready to create a miracle with your own hands!

   1. We will use a whole sheet of A4 paper. Place it as shown in the photo.
      
   2. Fold the right corner so that you have a rectangle.
      
   3. Now bend the bottom one up so that you get a pentagon, as in the photo.
      
   4. Fold the opposite side.
      
   5. Bend the figure diagonally and we get a triangle.
      
   6. We unfold it to the left and bend its left edge in half.
      
   7. The right side of the figure wrap over the left one.
      
   8. We make another bend in the same direction.
      
   9. We send one of the corners inward so that the claw can keep its shape.
      
   10. Our props are almost ready.
       
   11. Finding a hole into which you need to insert your fingers, and slightly straighten it.
       

   Of course, this is not the only way to make paper claws. We invite you to look at a couple more YouTube video on this topic.

   How to make predator claws out of paper?

   And you will find another way to make nails out of paper. Moreover, these will be real predator claws, which can later be painted to give them a more frightening look. Also, such claws can be used to create the image already mentioned above Freddy Krueger: Just put them on your fingers, over your black gloves.
   

   It is very easy to make such claws, and we will tell you about all the intricacies and nuances of this work completely free of charge. You will need following tools:

   • scissors;
   • simple pencil;
   • black gloves (optional);
   • glue gun;
   • spray paint or tube acrylic paint;
   • sheets of thick paper or thermoplastic;
   • hair dryer (for heating thermoplastic).

   If in the previous master class we got rather small lynx claws, then this time you can expect real sharp ones. claws of a fantastic predator. How to make this unusual prop, see below.