How to tie a St. George's ribbon - the bow method. How to tie a St. George ribbon, master classes with photos How to knit a St. George ribbon

International holiday May 9 is the great Victory Day. Every year, many people come out to celebrate and walk to congratulate and thank veterans for their great feat. The St. George ribbon became an integral attribute of war and victory. Every veteran has one and the celebration is always decorated with this symbol. Make a bow out of St. George's ribbon with your own hands for a veteran or just decorations - a simple task. Even high school students can handle it in labor classes or at home. Any veteran would be very pleased with such a gift.

Let's present several options for step-by-step sewing bows from St. George's ribbon different materials and of varying complexity.

St. George's bow

Materials:

rep St. George ribbon 57 cm long;
black satin ribbon 36 cm;
orange satin ribbon 30 cm;
lighter or candle;
needle with thread;
glue "Moment";
black bead or half bead.

We carry out production step by step. Cut 15 cm of rep St. George's ribbon. Fold it at an acute angle. We cut off 6 pieces of the St. George ribbon, 7 cm each. We also fold them at an acute angle and bend them. Having made two folds at the bottom, we treat the edges with fire, fastening them together. We do the same with the remaining five cuts. We collect the petals at the base into a flower, tightening the thread. Glue it to the workpiece. From black satin ribbon we make 6 pieces of 6 cm each. Using the method described above we make 6 petals.

We sew them at the base into a flower. Glue it onto the blank so that the petals are staggered. We cut the orange satin ribbon into 5 pieces of 5 cm each. We make the petals as before. Sew it into a flower and glue it on top of the black flower.

Glue a black bead or half bead into the middle. St. George's bow is ready. Can be attached with a pin or brooch blank to clothing and accessories. You can sew on a hair tie.

With tricolor

Another simple option for making a brooch could be this simple option with a ribbon, bow and flower.

Materials and tools:

St. George ribbon 3*18;
tricolor ribbon 25;
heat gun or Moment glue;
needle with thread;
scissors;
pin or brooch base.

Let's start sewing. From the St. George ribbon we cut three pieces 18 cm long.

To understand where the middle of the segment is, fold it as shown in the photo.

Fold another piece in the same way.

Lubricate the first cut at the bend with glue.

While the glue is not dry, glue the second prepared part.

We bend the third 18-centimeter section at an acute angle.

Glue it to the back of the prepared bow.

We cut the ends of the tape obliquely and process it with a candle or lighter.

We cut the tricolor ribbon into 5 parts of 5 cm each.

We bend the cut in half and sew it together as shown in the photo.

Without cutting the thread, we collect all the tricolor pieces.

Now we tighten the thread. Fasten and cut. It turns out to be a flower.

Align the flower petals and glue it onto the blank.

Glue a half bead into the middle of the flower.

On the reverse side of the brooch we put a few drops of glue and attach the blank for the brooch.

A bow made from St. George's ribbon is simple and quick to make with your own hands!

With kanzashi flower

A kanzashi bow will be a good decoration for May 9th. Below is a master class on making a very beautiful flower.

Necessary materials:

St. George ribbon 1 meter;
black satin ribbon 1.2 cm wide – 80 cm;
orange satin ribbon 1.2 cm wide and 65 cm long;
orange satin ribbon 2.5 cm wide and 22 cm long;
gold brocade 2.5 cm wide and 25 cm long;
felt circle 3 cm in diameter;
gold thread 20 cm;
black beads for decoration and a black half-bead for the middle of the bow;
brooch blank or pin;
scissors;
glue “Moment” or thermo-gun;
candle or lighter.

Let's start modeling. From an orange ribbon 1.2 cm wide we make 13 strips of 5 cm each. From a black satin ribbon 1.2 cm wide we make 16 cuts of 5 cm each. From the blanks you need to make kanzashi. To do this, take the first piece of tape, place it vertically and bend it approximately in the middle so that a right angle is formed. Then, the part that was bent to the side is bent down. The parts of the right angle are juxtaposed during this process and the “roof of the house” emerges. We assemble the base of the part with an envelope, process it and secure it with fire or glue.

We repeat the above steps for all prepared cuts. There should be 13 orange and 16 black Kanzashiks.

We cut an orange ribbon 2.5 cm wide into 9 pieces of 2.5 cm each. Place one square with the satin side down and connect the opposite corners. Once again bend along the height of the triangle. We fix the edges with glue and straighten the single kanzashi. We cut the gold brocade ribbon into 10 pieces of 2.5 cm each.

We form 9 orange single kanzashi and 10 exactly the same gold ones.

We cut the gold thread into 3 parts: 2 pcs. 6 cm and one 8 cm. We string several black beads onto each cord. We glue trefoils from orange 2.5-centimeter kanzashi to the edges, as shown in the photo.

We glue the golden petals into 2 branches, starting from top part. This way you will get two branches.

Glue the black petals in a circle onto the previously prepared felt circle.

This must be done carefully and symmetrically. Petals can overlap, but only in one direction.

Glue the orange petals in the same way. The corners of the petals are arranged staggered. This will make the flower look more voluminous.

We decorate the center of the orange flower with a half bead. At the back, on the felt, we glue the prepared laces.

At the back of the black petals, at the top of the bow, we glue golden branches. We form a St. George's loop, glue it at the place of interlacing and glue the finished flower. We glue the fastener to the back of the tape. Ready!

Video on the topic of the article

Good day! Or as they also say, ok Google))). Tell me, my friend, how to make something out of a St. George ribbon? Admit it, you often communicate like this, ah-ha-ha.

In general, today we are going to get acquainted with such a funny and very beautiful attribute that we always attach to our clothes and even hang on our cars. Whatever one may say, it has become very fashionable lately. We even started selling such crafts near large supermarkets, and I see that in the May days they are snapped up by young needlewomen with a bang.

Well, so what, it really looks very attractive, and most importantly symbolizes this significant day in the history of our beloved country, Russia. Do you know the history of this attribute? Write your guesses and assumptions at the bottom of this note.

I just want to remind you that in addition to such decorations and badges of honor, veterans on this day should be presented with flowers, read to them and, of course, present some surprise in uniform or

How to correctly and beautifully tie a St. George ribbon on clothes? (diagram inside)

It has long been known that such a ribbon denotes two states, death and resurrection, or rather these two colors, orange and black.

There are several ways to tie such an attribute; it dates back to the reign of Catherine II. It was then that soldiers and wars were awarded such a gift and this is how you could tie this detail on your attire.

I think you will be surprised now when you see this picture, but at the same time you will know, and perhaps practice at home in advance.

The most popular methods are presented before you, you can do it using the most easy way, also tie it with a tick, in the form of a tie and even a scarf. Yes, this image shows everything perfectly.

But that’s not all, it’s not enough to be able to fold the tape this way, you also need to know where and in what places it can be placed.

There are prohibited areas of the body where, according to new recommendations, this attribute should not be applied. Look at the picture and remember.

Well, of course, you can not just take and attach such beauty, but somehow decorate and design it in a cool way so that it attracts the eye. This is exactly what we will talk about next.

DIY St. George ribbon made from ribbons using the kanzashi technique

Undoubtedly, for the holiday this sign of honor of clothing can be secured in a special and more effective way. If you are also a creative person, then please pay attention to such a product. It can be done in 1 hour, it can be done by a child, but only by an adult, or it can be done by younger children, but only under the supervision of elders. Because some parts are melted here.

You'll get a cool brooch in the shape of a three-dimensional star, I saw one like this last year, but I didn't think that it could be made so easily and quickly at home. Class! MK is taken from the Country of Mothers.

You will need:

tape by meter (width 35 mm) - 60 cm
brooch base - 1 pc.
pin - 1 pc.
rhinestones, beads, etc.
ruler
scissors
tweezers
candle or lighter
glue gun

Stages of work:

1. Take an orange and black ribbon and cut it into rectangular pieces, each shape should be 7 cm long.

2. Now, to make it convenient, you need to take tweezers. You can do without it, take eyebrow tweezers, and this is what we do, we bend the base so that the angle comes out, as you can see, as a straight line.

3. Then crumple it again, from right to left, and level the bottom part so that it comes out smooth.

4. Fold in half again.

5. What does it look like? I think it's a petal. Select the edges of the product.

6. And you have to set them on fire

7. This is how beautiful it will turn out. This is what the reverse side looks like.

8. To create a star, you will need to make 5 such templates, the main thing is that they are almost the same so that it looks perfect.

9. The rest of the tape, its length should be about 20 cm, trim the ends in the form of a greater and lesser sign on both sides. In other words, you should fold it in half and cut it at a 45 degree angle.

11. Glue or sew on the back side, depending on what base you have for the brooch. Thread a pin through.

12. Turn the workpiece over and, well, now glue the star or perhaps it will resemble a flower with a glue gun, and decorate the middle with any decor.

This beauty can be used as a pendant for a car; then, instead of the base for the brooch, you need to glue a satin ribbon. It will look like a keychain.

By the way, the middle can be done in this way, you can cheat it, decorate it with inscriptions that you can find on the Internet or download right now.

You can print it on photo paper, it will look brighter and even more beautiful.

It will look unusual and very worthy at the holiday!

Here are some more ideas you can implement.

Such waves, or lambs, I don’t even know what to call such a craft, also made an impression on me. Like?

Or something similar, as they did in the first version.

Only here the fabric doesn’t bend so much, see for yourself.

You can do without glue and sew with a regular needle and thread. Some people are simply afraid of a glue gun, or perhaps they don’t have one yet. So, no big deal, consider this option then.

Another amazing design idea. Of course, more accurate measurements are needed here.

It still looks magical.

We decorate the St. George's ribbon 2020 easily and simply

Now I propose step by step instructions, with the help of it you can teach children to tie this little thing like this. After all, sometimes you want to kindergarten or for example in primary school Show the kids something unusual. So, just this case and take this idea as a basis.

Lay the strip of fabric horizontally in front of you.

Then, with your hands on each side, bring the ends towards the center. But before that, you still need to determine the middle.

This can be done by eye or using a regular ruler.

I think this will make a bow.

Yes, of course it is. Secure it with a pin or gently drip glue. You can sew it on, depending on what age group the kids got ready.

Or simply tie it with thread or satin ribbon.

The next option is more complicated, and it is already for older schoolchildren or for those who do needlework and love this skill. Make the petals first. The piece of fabric should be about 11 cm.

Use tweezers to pinch very tightly and bring it to the candle, slightly melting it.

Be careful with the fire; it is better to place the candle in a bowl or place it on a special stand.

Make exactly five of these things.

Glue them together with a glue gun to make a flower.

It looks more like an icon in the form of a five-pointed star.

All that remains is to complete it with any decorative decoration. For example, a rhinestone or a button.

And on the back side glue the clasp from the brooch.

The result was a souvenir in the form of the Order of Victory.

Step-by-step master class for Victory Day

You know, while I was preparing for this article, I found so many awesome crafts that I simply couldn’t put them all here. But, among the wide variety, I really liked this masterpiece. In general, I decided to devote two notes on this topic this year. So, if anyone is interested, wait for another note to come out soon.

If you don’t like watching, or the Internet is slow and hangs, then read this. This option is similar to the previous ones, but it is still different, but you will see for yourself that it is new.

We will need:

Stages of work:

Take the width of the tape 2.5 cm. Determine the length yourself, bend it at an angle, as shown in the picture below.

You need to cut out 5 such blanks.

Remember that you need to be extremely careful and careful when working with a glue gun so as not to burn your hands.

We repeat step by step.

Also keep an eye on your workspace.

You can use a candle instead of a lighter.

And now the most interesting thing is that this decor will make this craft even more beautiful.

You can take any color, silver and gold.

It turns out amazing.

By the way, you can make such a badge in the style of the tricolor of our Russian flag. A video from the YouTube channel will help with this.

How to make a St. George ribbon from paper?

Amazed? Surprised? But this option also exists. Paper is a material that is found in every home; it is not difficult to work with, and most importantly, it is always available.

Read this manual and repeat all the necessary steps.

Two-color ribbon decorated with flowers

Spring has come and brought with it good mood and of course singing birds and blooming flowers. On Victory Day it is nice to give carnations and tulips to veterans. Therefore, I propose to make such creations this time.

In fact, you can make not only these flowers, I have seen that such brooches are decorated with forget-me-nots, roses and a sprig of lilac or apple blossom. Of course, this is the well-known kanzashi technique. Take a look at this selection of stories.

I think they will be useful to many, who are making this wonderful creation for the first time.

Let's get to work, make a brooch with tulips, recommendations were given by Olga Ivanova.

This time take a wide satin ribbon, its width should be 5 cm. Using a ruler and pencil, make segments equal to 4 cm, cut the fabric into 9 parts. Cut each template in half.

The ends should be made in a semicircle; these will be the petals of the future flower.

Now you need to set the edges on fire so that they do not fluff.

Using your fingers, carefully form two folds at the bottom of the base, as if making a small accordion, and secure with fire. Use tweezers. You will need to make 18 such petals to make three tulips; each bud will require 6 blanks.

Interesting! You can also wrap it with green threads, in general, use your ingenuity and imagination.

And into this rounding place small stamens (6-7 pieces) made of wire.

Now let's start assembling, complete the first row and decorate it with three petals. Glue them to each other in a circle.

Now we make the sepals, to do this, bend a piece of square green fabric 5 cm x 5 cm in such a way as if you were working with a sheet of paper and fold it in half diagonally twice, and then again. These actions are reminiscent of the process of folding a snowflake.

Next, cut and round and open the product, then heat the needle (hold it over the flame for 14 seconds) and pierce the workpiece. But, before that, don’t forget to treat the edges with a candle when your sepal is rolled up.

We put the resulting green beauty on the stem to the flower and glue it with a gun.

This is how we make all the other samples, and then connect everything with another sepal, and treat the stem with corrugated paper.

Now you need to make an elegant bow from a thin ribbon (12 mm). Take a fork and thread the end of the strip through like this. With the end you are not working, take it to the right side, and pass the working end into the center.

Then press it a little and pass the working ribbon again through the middle of the fork.

Tie a knot tightly with your hands.

All that remains now is to remove it.

And cut the ends at an angle of 45 degrees, and then melt each one so as not to fringe.

Do the same with the St. George ribbon itself, trim the ends and melt them.

Roll it into a figure eight and glue it together with the bouquet.

Also glue the base of the brooch to the back, that is, thread at least a small pin.

And finally, a stunning spring masterpiece with blooming tulips.

Brooch for May 9th in kanzashi style (MK + photo illustrations)

Since you have landed on this page, I can assume that this is the information you are looking for. Is not it? How do you like such diverse ideas? I tried to find as much stuff as possible so that you could find the best and most beautiful option for yourself.

Write your review or wish at the bottom of the article, I will be very grateful for your response.

Well, on the monitor screen we look at the next victory icon, only it is different from all the previous ones, it also has two elegant ribbons dangling at the bottom. It looks like an honorary medal for services to the Fatherland.

We will need:

Stages of work:

1. Take a St. George ribbon 3.5 cm wide and 25 cm long. Make squares of 10 pieces of each color from a black and orange satin ribbon (strip width 5 cm).

For decoration you will need a ribbon 2.5 cm wide, from it cut out 6 squares 2.5 cm by 2.5 cm.

2. Take a piece of black tape and fold the square diagonally.

3. Do the same with the yellow-orange square.

4. Then close it one more time.

5. And again, to make a small petal, draw lines like this. And then unfold it, there is no need to fold it a third time.

6. Now place the black triangle like this with the angle down, and the orange blank with the base down.

7. Start folding the ends of the black fabric.

8. Do this on each side. As shown in this picture.

9. Repeat the work one more time.

10. Then flatten it with your hands, you can transfer the work to tweezers.

11. Light and singe the ends.

12. Trim off the excess.

12. And again use a lighter.

14. They are also performed in the same way. Glue these blanks onto 6 mm tape with a glue gun.

15. From those first blanks, also assemble a flower. Coat each side of the petal with glue.

17. Thus we come to the final part. Fold the two-color ribbon into a figure eight and glue it together.

18. Decorate with the remaining details. It is preferable to make the base for the brooch on the reverse side. So that you can pin it on clothes or any other object.

Original and simple car suspension

In general, you can take absolutely any type of work as a basis, just instead of the pin that is made on the back, make a ribbon and then such a symbol of victory can be hung in the car.

I suggest you make it this time in the tricolor style, this can also be used for Russia Day.

Since in this article I have already given many recommendations on how to make petals using the kanzashi technique, I think I will not repeat myself here, you can scroll above and read the information.

Let me just say that you will need 6 squares of each color (blue, red and white) ribbon 5 cm x 5 cm, tricolor 2 cm, and a satin ribbon in the style of the three colors of the flag.

From squares different colors make petals in any way you like, as described above.

Don't forget to scorch the edges to prevent them from fraying.

Make petals from the three-color style ribbon too.

Then start assembling the product, insert one petal into another, as if making a spikelet.

Make two such blanks.

Use glue to create a star using other colorful petals.

Afterwards, connect everything and insert another decorative satin ribbon in the form of a loop.

You can decorate it in different ways. To your taste and discretion.

Many are satisfied with another option so that they can secure it somewhere. Yes, if you don't have a brooch base, you can use a regular pin and a piece of felt instead, take a look.

The main attribute of the holiday made of satin ribbons and beads

Among the wide variety of jewelry, another souvenir decorated with beads is very impressive.

In fact, if you are into beadwork, then you just need to glue the necessary attribute onto the St. George ribbon. For example, in one of our previous articles we did, it can be used here too.

And now I suggest you familiarize yourself with this story.

Or this instruction.

Making a few more symbols for May 9

Well, friends have come to the very last question. I recommend that you look at other crafts that can also represent this holiday.

You can make a bow from the St. George ribbon.

You can also decorate from a material such as foamiran, a flower like this and its master class can be viewed

You can lay out the number 9 and glue a pattern in the form of a spikelet.

For children, you can offer this sketch in the form of a butterfly. Just place it on the ribbon.

Here are some more ideas for inspiration and creativity.

This is where I decided to end this post. All the best and positive! Come visit more often, join the group in contact and write your reviews and wishes right below the article. Bye everyone!

Sincerely, Ekaterina Mantsurova

Residents of Russia celebrate Victory Day every year, paying tribute and respect to the Red Army, which broke the back of Nazi power. On this special day it is customary to wear a St. George's ribbon. Some people even wear this symbol. all year round, it all depends on the desire of the person. Nowadays it is possible to buy a ready-made version of the folded tape in the trade pavilion, but you can learn how to fold it yourself. In this regard, the question arises, how to tie the St. George ribbon?

How to wear a St. George's ribbon on clothes correctly

To understand how to make a St. George ribbon, you need to familiarize yourself with the history of the symbol. The commemorative ribbon is created not just for fashion and style, it carries a deep meaning. Unfortunately, many young people still do not know the history of the creation of the ribbon.

Now it’s not so easy to understand history, especially when this sign appeared. There is a category of people who believe that the ribbon originated during Russian Empire. As a rule, it was worn by the military. The symbol itself was initially yellow, but after some time it was repainted orange. So, in the end, the already familiar St. George’s ribbon with orange stripes on a dark background appeared. The troops of Imperial Russia wore it proudly on their chests. They knew exactly how to wear the St. George ribbon on their clothes correctly.

It is no secret that most citizens associate the black and orange ribbon with the symbol of victory in the Second World War. It was in 1945 that the Soviet army won a victory over the Nazis. Since then, first in the USSR and then in Russia, every year May 9 is celebrated great victory. Despite the fact that more than half a century has passed, Russians still remember those memorable events, because in every family there is a hero who gave his life so that the homeland would go to the children. Therefore, on May 9, citizens of the Russian Federation put on the St. George ribbon to express their respect and gratitude to the defenders of the country.

If you look further into history, you can find out that in the early 1940s the People's Committee Navy proposed to approve the colors of the breast medal for sailors. This symbol was similar to the St. George's ribbon. However, there are sources that claim that in 1710, many ships hung a flag similar to the St. George ribbon for military merit. This feature indicated that the ship received guards status.

As for Victory Day in 1945, all participants in the hostilities received awards with the title “For Victory.” This medal was covered on all sides with black and orange fabric.

How to tie a St. George's ribbon beautifully?

A few days before May 9, many Russians lose their ribbons or simply don’t know how to make a St. George’s ribbon with their own hands so that it looks festive. It is worth noting that many people may know how to tie the St. George ribbon, but not understand the whole scheme.

First of all, you need to tie the fabric in the form of a bow or make it into a regular loop. It is possible that you will need to learn how to do this; not everyone succeeds the first time.

Techniques for tying the St. George ribbon:

How to tie a St. George's ribbon? If a person has never tied a bow before, then you can experiment by buying a meter of satin ribbon. The main thing is that the ribbon is black and orange.
For convenience, you should lay the fabric out on a flat surface and make a loop out of it.
After this, you need to do the same actions with the second end of the ribbon.
Finally, cross the ends of the fabric and secure them with a pin.

How to fold a St. George's ribbon beautifully? There is nothing complicated about this, since this method of tying is considered the simplest. People tie their ribbon this way when they wear it every day. Even a schoolchild can cope with this task, because it does not require special skills.

How to make a bow from a St. George ribbon? There is another way to tie a ribbon on a bow:

To make a bow from a St. George ribbon with your own hands, you first need to create a regular bow from a ribbon.
For these actions you need a black rubber band. This thing serves as a bow fastener. As a result, the result can surprise you with its beauty, elegance and reliability.

How to beautifully fold the St. George ribbon so that the bow is appropriate. For example, a badge does not always look beautiful on a person with a presentable appearance, especially if the bow is pinned to the chest.

For this case, there is an option in the form of a loop:

To easily handle the ribbon, you need to place it on the table and then fold it in half.
One end needs to be pulled up a little so that it is shorter than the other.
Then you should pull it a little to the side, creating the letter “G”.
The upper end of the ribbon should be pulled again, forming a loop.

Methods for tying a St. George ribbon

How to tie a St. George's ribbon diagram? Today, many options for tying a ribbon have been invented. Although you will have to spend a lot of time to get it right.

You can learn how to make a ribbon in the shape of a “butterfly” that is attached to the neck:

It is worth noting that tying a ribbon around your neck is inconvenient, so it is better to experiment with some big toy. Even a regular cup will do.
At the very beginning, it is worth making one end of the tape shorter than the other.
When crossing the ends of the ribbon, you need the long end to be on top.
Then make a loop by folding the short part in half. The result will be a cute bow.
Then you should again thread the long end through the loop so that it ends up on top.
At the very end, you need to pull both ends in different directions.

How to beautifully fold the St. George ribbon into a bow

There is another interesting way to tie a holiday ribbon. A ribbon folded into a pentagon will decorate any formal suit. In addition, this option is considered very reliable and durable, since the tape lasts for an extremely long time in the same condition.

You need to fold the tape so that one end is wrapped around your fingers.
Then we thread one end of the ribbon, turning it in the opposite direction.
We even out both ends, tightening them tightly.
If necessary, you can trim the ends. However, you should not singe them; the ribbon may lose its natural beauty.

Now, how to make a bow from a St. George ribbon will not be difficult for anyone, the main thing is patience and diligence. But it’s also worth considering a few more points. For example, on May 9, the St. George ribbon is worn on the chest on the left side, where the heart is. But don't be surprised if someone chooses to tie it around their arm or hang it over their clothing. Also, we must not forget that the St. George ribbon was not created for showing off in front of others. This symbol personifies the feat of our ancestors, so we need to respect this sign.

According to the rules, a ribbon is not tied on pets, but in modern world You can also find such a picture. It is not recommended to attach the St. George ribbon to trousers, skirts, hair or shoes. The best option for fastening there will be a dark-colored jacket in the heart area on the left side. It was at this place that WWII soldiers wore breastplates and medals. Although the ribbon can be tied over a vehicle or inside a car on a holiday. The younger generation should honor history and those who fought for our freedom!

The fact that people remember their significant exploits. An awkward and shameful moment is the realization that, having acquired such a valuable attribute, you fall into extremes from not knowing how such a precious symbol should be tied beautifully and correctly.

First let's determine where it appears would be appropriate: on the handles of a handbag, a side mirror, on a car antenna, in the form of a symbol - decoration with a bow on clothes.

It is prohibited to decorate with the St. George's ribbon: hair, dog collar, jeans belt. According to traditions, the St. George Ribbon is required to be pinned to communities whose relatives were touched by the war years; citizens who know and understand what the price was for the taste of triumph and happiness of subsequent generations; remembering and filled with pride for their homeland and its ancient past. This symbol of Victory should not be used as a regular decoration.

It is also unacceptable to use it inappropriately. For those who do not want to break traditions and show disrespect for military personnel, there are tips on how to use the St. George Ribbon, correctly form it into a bow and attach it.

How to tie a St. George's ribbon

1. First, place the tape on a straight surface and grab it by the right end.

3. A similar process must be carried out with a different ending.

4. Without additional fastening, such a bow cannot hold its shape and will open, so we punch it in the area where the limbs cross with a sewing pin and at the same time fasten it to the surface of the garment.

5. Hold both ends of the ribbon with your fingers.

6. Place the left end on the right, then pass it around it and pull the end of the tape down at a right angle from the right side, and up from the left.

7. This creates the starting node.

8. Then place the lower end in such a way as to form a semi-bow.

9. In the next step, you need to take a half bow with the other unused end and tighten it into the loop almost to the end to create the next half bow.

10. Finally, pull both loops horizontally in opposite directions, after which you need to tighten the knot.

Scheme of how to tie a bow using an elastic band:

Now the bow - the symbol has come to completion, we attach it to outerwear, purse, or to the car. Create your own symbol - the St. George Ribbon and wear it in honor of Victory Day and as a sign of memory of the fallen soldiers and pride in your Fatherland.

How to beautifully tie a St. George ribbon (bow) - video

04 05.2017

04. 05.2017

Catherine's blog
Bogdanova

Dear friends and readers of the site “Family and Childhood”! We continue to prepare together with you for the wonderful May holiday - Victory Day. And we will march in the Parade with our heads held high, because we are all descendants of the Great Victors who liberated the whole world from the Nazis. We have already considered with you the option of modeling a patriotic one. Anyone can replicate this wonderful accessory. But for those who still have some questions about how exactly to make a loop, or do not have time for such experiments, another article is presented. From it you will learn how to beautifully tie a St. George's ribbon. The final photo shows 3 simple options. Choose any one.

The striped orange and black ribbon itself already looks rich; it is not necessary to decorate it with kanzashi elements. And you can make a small accessory for yourself and your loved ones in a matter of minutes, with only a thread and a needle and superglue in your arsenal. You don't even need a glue gun. So, let's look at all the details in detail.

1 version of the St. George accessory - the famous loop

To model it, you only need a ready-made tape measuring 2.5 * 25 cm and waste cardboard from which to cut out a template. The template is a rectangle approximately 6 cm wide and of arbitrary length with beveled edges (on one side). Trim the corners on one side of the rectangle so that a 2 cm long side remains in the center and the beveled sides become 3.5 cm long.

Lay the St. George ribbon horizontally, place the cardboard on it so that the beveled end is clearly on it. Fold one side of the tape first, then the other. Thus, you will get an even loop, which can be further decorated with kanzashi elements.

But our plans include modeling the simple option. This is exactly what you can use. You don't need any additional parts, just an invisible needle, which is convenient for fastening the resulting loop to your jacket. Holding the accessory in the center with your finger, remove the template, attach it to the jacket and secure with a bobby pin or clip. That's all.

Option 2 of the St. George accessory – bow with double loops

To make such an accessory, which is more suitable for women and children, you will need 4 pieces of striped St. George ribbon in sizes: 20 cm, 18 cm, 14 cm, 7 cm (one of each). And also for fastening you will have to use super glue or thread with a needle.

Leave the smallest piece of 7 cm for the middle. Bend two parts 18 cm and 14 cm towards the center to make double loops. Place the larger piece on top of the smaller one. At this stage, you can already glue the layers of the bow together or leave it like that for now. Bend a 20 cm long piece in half and split it to the sides.

Apply a 7cm piece to the center of the bow.

Bring the ends of the small piece together at the back of the bow, sewing or gluing them together. Glue the longest piece bent in half at the bottom to show the tails. Photo 6 The resulting bow can be sewn to the jacket and pinned with a pin.

Option 3 of the St. George accessory - a bow with four loops

To make the next bow model, you will need 2 pieces of St. George’s ribbon 16 cm long, 1 piece 14 cm long and 1 piece 5 cm long. Again, the fastening method is a thread with a needle.

Bend two strips of equal length 16 cm in half in the same way as in the second case - pointing the opposite ends towards the center. Lay both parts together, placing them end-to-end along the length. Pull the thread through the center with large stitches. Cut a piece 14 cm long from both ends in the shape of birds, bend it in half.

Pull the thread into a tight knot. Wind a small piece of 5 cm in the center. The upper and lower parts of the brooch are ready.

Come up with a mounting method. Naturally, a pin is the simplest option.

Conclusion

Dear friends, now you know 3 simple but reliable ways to model a beautiful St. George's loop. When going to the parade, stop by the store to buy accessories; the recommendations presented will allow you to quickly make wonderful accessories for the whole family. Share the article on social networks, this information may be useful to one of your friends. And you will all go to the main square of the city with memorial signs of respect to veterans.