Health Pregnancy beauty

Beautiful snowflakes using quilling technique. Snowflakes using quilling technique - New Year's paper rolling! #7 New Year's toys using quilling technique for experienced craftswomen

The quilling technique appeared quite a long time ago, about 500 years ago. For the first time it began to appear in European countries. This technique involves twisting strips of paper and then gluing them together. These twisted stripes are then used to create various patterns and crafts. Collapsed stripes form both closed and open figures. Simple figures are used to form patterns that can be either simple or entire works of art. The patterns in this technique are very airy and lacy. Therefore, today we will look at how to make a step-by-step original quilling snowflake. We will make an openwork snowflake that can be hung on Christmas tree or near the desktop so that it reminds us that the holidays have arrived and we need to devote more time to family and relaxation.

Learning the basics of quilling technique: snowflake step by step for beginners

To make it we will need:
  • Toothpick;
  • Tweezers;
  • Scissors;
  • Glue;
  • Paper.

Let's start making a large snowflake using the quilling technique.

We take a landscape sheet and draw stripes on it using a pencil and ruler. Be sure to make sure that the lines are straight. Then we cut the sheet along the drawn lines. A stationery knife can help us with this.

We take a toothpick and apply it to the edge of the strip, and then we wind the strip onto the toothpick, turn by turn.

We secure the end of the strip and carefully remove the resulting roll from the toothpick.

If you don’t quite understand the description of this process, don’t worry, below you will see a photo that shows step by step the process of creating basic elements.

We make another such blank, only now we squeeze one edge with our fingers. As a result of this action, we get an element that looks like a droplet. For our composition, we repeat the above manipulations five more times.

Then we glue the resulting 6 drops to the first figure.

We take the toothpick again and wind up more rolls and now squeeze them on both sides so that the result is a figurine in the shape of an eye.

Between the petal rays we glue the parts we just made.

Now we take 3 strips, bend them in half and cut them, we get 6 short strips.

We crowd them in the manner described above.

On each tip of the part we glue a figure in the shape of an eye.

We make 6 more coils and bend them with our fingers until we get a square shape.

Glue them at the top to the large coil.

Now we wrap a strip of paper around a pencil, glue the end of the paper and remove it from the pencil. This part will serve as a loop for hanging it on Christmas trees, or whatever your heart desires.

Glue it to one of the tops of our snowflake. We stretch a ribbon or thread through the resulting ring.

As in any type of activity in quilling, of course, there are certain clichés or, in other words, basic elements. Let's look at what they look like. There are various forms of coils. Let's look at the most popular ones.

  1. An open coil is when the end of the strip is not attached to the main part of the strip.
  2. Closed coil - the end of the strip is secured to form a closed loop.
  3. Tight coil - the strip is stretched very tightly throughout the entire twisting and is tightly secured; such a coil looks like a knot on an openwork background.
  4. Large coil - when creating, we use a regular pencil or any other thick core or frame for winding.
  5. Drop - press one end with your fingers.
  6. Eye - press both ends.
  7. Petal - squeeze with your fingers and bend on one side.
  8. Sheet - squeeze on both sides and make waves.
  9. Curls - fold the strip in half and twist the ends in different directions.

You can see various options for snowflake patterns in the photo below:

Quilling is the art of creation openwork patterns from paper. Translated from English, quill means “bird feather.” The brainchild of your creativity can be beautiful airy lace patterns that are completely transparent. You can create amazing compositions, full of all the colors of the rainbow, evoking the mood you need. Paintings made using this technique will fit into any interior: from gothic to high-tech, flexibility of this art allows you to combine rigor and grace, colorful or dark colors, from flowers to portraits, it depends only on the desires and scale of the work: all this can be said about quilling. You can not only have fun, but also benefit both your interior and your wallet, because high-quality work has a high price.

Video selection on the topic of the article

A ruler with round holes is needed to ensure that our spirals are the same diameter. You can buy a regular ruler with holes at a stationery store. Although for our snowflake this ruler is not needed. It is worth noting that you can twist the strips with different tools. You can use an awl, a special rod with slots, or a toothpick.

Now let’s make an openwork and airy one with our own hands.

snowflake using quilling technique.

So, for the snowflake we need:

  • Strips of paper:
    1 – 15 cm for the central circle
    8 – 8.5 cm for sleeve
    4 – 15 cm for scrolls
    4 – 7.5 cm for droplets
    4 – 5 cm for diamonds
    The standard strip width is 3mm. The paper should be quite thick (paper weight should be at least 60 grams per square meter) so that it rolls neatly and keeps its shape. If you have a shredder, you can make strips directly on it.
  • Any quick-drying glue, preferably not very liquid
  • Special tool for quilling. The most common alternatives are a gypsy needle or a regular wooden toothpick.


0 We start from the central circle (15 cm strip). The paper needs to be rolled very tightly so that it can hold the correct shape itself. After this, we drip glue onto the tip of the strip and glue it to the circle.

0

0
For the droplets we use strips 7.5 cm long. The technique is almost the same as in the previous step, only at the end, before gluing the edge, we leave a little more free space and give the circle a droplet shape.

0
We make diamonds from strips 5 cm long. We twist small circles, glue the edge and then make a diamond out of it.

0
Let's move on to the scrolls. We bend strips 15 cm long in half and roll them into spirals towards the center, you should get some kind of hearts.

0
The last piece is the sleeves. For them we use strips of 8 cm. On one side we make 2 turns, on the other we weld about 2.5 centimeters. When all the sleeves are ready, glue them together with their “backs”.

0

0

    After all the preparations we should have:
  • 1 lap
  • 4 drops
  • 4 diamonds
  • 4 scrolls
  • 4 sleeves


0 Now that all the parts are ready, step by step we glue our snowflake together. Once the snowflake is ready, you can cover it with glitter or silver spray.

0

0

0

0

0

You can leave the snowflakes white. Or you can cover them with a spray can or sprinkle them with glitter.
You can hang a snowflake using beautiful ribbon or colorless fishing line.

Snowflakes can be made from white paper and spray painted with the desired color. You can also make snowflakes from colored paper.

Colored snowflakes (quilling)

More photos of beautiful snowflakes in this wonderful technique from Stephanie Sanchez:

Please note that some snowflakes are made of two colors, but all the colors are very soft, which gives the snowflakes a lace appearance.

Airy snowflakes and paper decorations

What technique can better convey the airiness and lightness, the openwork lace pattern of snowflakes, than the quilling technique? Making snowflakes from paper, or rather from twisted strips, resembles a mosaic or a kaleidoscope with a huge number of options. The prepared parts can be glued to the base, making cards or panels, or they can be glued together to hang amazing lace decorations on the Christmas tree. To complete these works you will need a white office paper. It needs to be cut into strips 5 mm thick along the short side. It is better to cut several sheets at once using a stationery knife along a ruler. For small quantities, you can cut it with scissors. You can twist the strips using different tools. You can use an awl, a special rod with slots, or a toothpick. But it was for making snowflakes that we most liked working with a wooden skewer. To make a snowflake (pendant or applique) you need to prepare various shapes from twisted strips. The forms can be closed, that is, glued together, or open, where no glue is used. Both are suitable for applications. And for a snowflake pendant, you can only use closed molds.

There is more than one master class from which you can learn how easy it is to create; it won’t be difficult at all if you break down the whole process.

It originated in European countries more than five hundred years ago and involves twisting paper strips and combining them into various patterns and crafts.

To create crafts using the quilling technique (snowflakes, for example), a minimum of tools is required: an awl (can be replaced with a toothpick), tweezers, scissors and glue. The most important material is paper, which is cut into strips. Most often, strips about three millimeters wide are used for crafts.

Simple snowflake

This craft is very easy to do and does not require any special skills.

Master class on how to make snowflakes using the quilling technique:

  1. Take a leaf plain paper and draw identical lines using a ruler and pencil.
  2. Cut the sheet into strips.
  3. Take an awl or toothpick and attach the edge of a paper strip to the end of it.
  4. Screw the strip onto the tool.
  5. Glue the end of the strip to the resulting coil and carefully remove the roll from the awl.
  6. Make another such coil, only now you need to slightly squeeze it with your fingers on one side.
  7. Make five more of these teardrop coils.
  8. Take the first card and glue six “droplets” to it.
  9. Now roll six coils and press them together with your fingers on two opposite sides. You should get a figure that resembles the shape of eyes.
  10. Then glue the new parts between the snowflake petals.
  11. Take three strips, fold them in half and cut them. As a result, you will get six short strips.
  12. Twist six coils from the new strips.
  13. Glue a new coil onto each end of the eye piece.
  14. Now make six more coils from the long strips, only slightly larger in size than the first. To do this, do not tighten the paper too much.
  15. Glue the new spools on top of the teardrop pieces between the small rolls.
  16. Make six more large coils and bend the sides with your fingers to make a square.
  17. Glue them on top to the large coils.
  18. Take a pencil and wrap a strip of paper around it.
  19. Glue the end of the strip and remove the spool.
  20. Glue a new spool to one of the tops of the snowflake and thread ribbon or thread through the ring.

These snowflakes using the quilling technique will look beautiful on a Christmas tree, doors or windows. Even after finishing New Year's holidays Many people don’t want to take off this beauty for a long time.

Snowflakes (quilling) - gluing patterns

You can make many different snowflakes from just one shaped part. To do this, cut many strips of equal length and width, take an awl or toothpick and roll the rolls. Make more than ten identical coils and then glue them together to make snowflakes (quilling). The schemes can be any, for example, as in the picture above.

In all cases, the process of gluing the coils should begin from the middle of the craft. That is, glue the parts to each other so that they form a circle. Then continue gluing other coils. In some types, the rolls must fit tightly together, in others the center must be hollow.

More complex crafts

To do openwork snowflakes quilling technique requires more time and perseverance. But the result is worth it.

Instructions for creating openwork snowflakes:

  1. Prepare paper strips, tweezers and glue (Illustration 1).
  2. Fold five strips in half (Illustration 2).
  3. Lubricate one end of the strip with glue and glue it to the middle using tweezers (illustrations 3 and 4).
  4. Wrap the second half of the strip around the petal and glue its end (illustrations 5, 6 and 7).
  5. Saddle four more similar petals, only each one should be smaller than the previous one. A total of six petals of each type are needed (Illustration 8).
  6. Take the smallest petal and coat its tip with glue (Illustration 9).
  7. Glue the petal into the middle of the other (illustration 10).
  8. Collect all five petals in the same way (Illustration 11).
  9. Collect all six petals (illustration 12).
  10. Squeeze the finished petal with your fingers, making it elongated (Illustration 13).
  11. Give a flattened shape to all six petals (illustration 14).
  12. Glue all the petals together (Illustration 15).
  13. Cut six more strips and fold them in half (Illustration 16).
  14. Cut six strips, fold them in half and cut the ends diagonally (Illustration 17)
  15. Twist each end onto an awl or toothpick (Figure 18).
  16. Glue the coil at a distance of 3.5 centimeters from the middle (Illustration 19).
  17. Lightly press each petal tip to fluff it up (Illustration 20).
  18. Glue “stamens” between the petals (illustration 21).
  19. Insert strips with beveled edges inside the “stamens” and glue them (illustration 22).
  20. Take loose glitter and sprinkle it on the snowflake (Illustration 23).

The snowflake is ready!

  1. You can make snowflakes-candlesticks using the quilling technique. To do this, collect two crafts of different sizes - one smaller, the other larger. Then just glue one on top of the other. In the one on top, the middle should be empty. This is where the tablet candle will be inserted.
  2. You can use beads, rhinestones, sparkles and the like as decor for snowflakes.
  3. To achieve a lacy look, expand your knowledge and make coils in different shapes.

Basic forms of quilling

There are twelve forms of coils that the quilling technique has. Snowflakes can be made using just one or all of them.

  1. Open spool: the end of the strip is not glued.
  2. Closed coil: the end is glued.
  3. Tight coil: the strip is stretched throughout the entire work and the end is tightly glued.
  4. Large spool: Use a pencil to create.
  5. Drop: one end is pressed with your fingers.
  6. Eye: both ends are pressed with fingers.
  7. Petal: The coil is compressed and bent on one side.
  8. Sheet: The coil is compressed on both sides and waves are made.
  9. Curls: the strip is folded in half, and then the ends are twisted in the appropriate directions (inside, inside out, in different directions).

After you become familiar with the basic points, you can begin more complex work using the quilling technique.

Paper snowflakes - traditional Christmas decoration. Most often they are cut out using stencils. You can create more elegant and unusual jewelry in fashion technology called quilling. Complex-looking compositions are assembled from simple elements- coil, drop, leaf, ring, curl. It's easy and very exciting.

Video master class Snowflake using clearing technique

For this you will need:

  1. Paper
  2. Long ruler and simple pencil
  3. Scissors
  4. Toothpick, skewer or knitting needle
  5. PVA glue
  6. Thin brush
  7. School stencil with round holes of different sizes
  8. Tweezers

There are ready-made quilling kits in stores. They have already cut strips different colors and torsion tools.

Snowflake quilling, It's very simple!

A sheet of paper must be marked into long strips of equal width and cut. To make a coil, you need to tightly wind a strip of paper onto a knitting needle, carefully remove it, unravel it to the desired diameter using a stencil, and secure the tip with glue. If the end is left free, it will be a curl. A drop will form if you lightly pinch the finished coil with your fingers on one side. The leaf is pinched on both sides. Triangles and diamonds are formed in a similar way. To get a ring, you need to wind the strip on a thick knitting needle or pencil and glue the free end, and then remove the finished element.

A snowflake can be made according to the model...


To do this, you need to count the number of parts in the sample, screw them on, and then simply assemble the desired composition. First, glue together the elements that form the middle of the future snowflake, and then sequentially glue the other parts, moving from the center to the edges. It's better to choose simple model first, and then try more complex schemes.

...or you can improvise!

Come up with a pattern on the fly, connect elements in random order, glue them on top of each other to add volume. Use colored or craft paper, glitter and beads. Fantasize and create unique lace masterpieces.

A particularly beautiful snowflake can be inserted into a deep frame and hung on the wall. In a frame under glass, a fragile creation will retain its beauty for a long time. for a long time, and will create a magical festive atmosphere in the house.

You can do quilling using the technique beautiful snowflakes, which can be used to decorate the Christmas tree, New Year's interior, New Year's card, or you can make a whole garland of such snowflakes.

Quilling does not require any unusual materials and many complex instruments. It is important to stock up on suitable paper and have one single tool for rolling paper strips. In Europe, a plastic, wooden or metal stick with a split end is used for this. Many people find it convenient to simply wind the paper onto the tip of an awl or darning needle.

When creating these snowflakes, basic shapes were used: drop, leaf, eye, square and other basic shapes. You can read about how to make these basic forms in the article: Quilling for Beginners

DIY Christmas snowflake

Required: paper tapes white(blue color), thin awl (toothpick or quilling tool), wool thread, glue.

Making a snowflake

■ Make the required number of “drop”, “eye” and “month” shapes from white (blue) ribbons.

■ Shape the pieces to make a snowflake.

DIY fairy snowflake

Required: white paper tapes ( blue color), thin awl, glue.

■ Wrap the edge of the tape around the tip of the awl. To achieve different sizes figures, use ribbons of longer or shorter length.

■ After wrapping one third of the strip, remove it from the awl and twist the rest of the strip by hand.

■ Form a shape from the resulting spiral, giving it the desired shape with your fingers. Secure the figure with glue.

■ Make the required number of “loose spiral” and “eye” shapes from white ribbons.

■ Take white or blue ribbons. Twist the ends to form heart, curl, and S shapes.

■ Glue the resulting parts together to form a snowflake.

❧ Quilling is an opportunity to see the unusual capabilities of ordinary paper.

These are the snowflakes you can make according to the patterns.

Snowflake

And here she is on the New Year's tree

Scheme for creating a snowflake

Snowflake

Scheme for creating a snowflake

Quilling snowflakes. Video