Wedding rings made of beads. Beaded rings for beginner needlewomen: detailed description and recommendations for craftswomen on creating jewelry

Beadwork is known not only for weaving crafts, New Year's toys, pendants, but also wonderful, original jewelry. A beaded ring is also no exception and can be created in different colors and unusual designs with or simply from beads.

The master class will help you get acquainted with all the intricacies of craftsmanship and will be useful not only for beginners, but also for craftsmen.

Necessary materials:

beads No. 10 and 11;
oval faceted bead 6 mm;
bicones 4 mm;
bead needles;
nylon thread.

Work process

The first thing you need to do is measure the thread along the length of the ring 1.2 m and cut it. Place a needle on the two ends, close the thread in half and string one bicone onto it. Place it in the center, and then put beads on both needles. Now cast on 4 bicones for one thread of the ring, and also pull the needle through the fixed cone. Thread 3 bicones onto a needle and thread a thread around them to secure them together.

Next, you need to bring the threads into two prepared cones of the ring, put 3 beads No. 11 on all threads and connect them in 3 beads. Again, collect 3 beads on the unoccupied threads and cross them again into 3 beads. It is necessary to make such a strip until the entire circumference of the finger. To these parameters you should add 2 more cubes.

Now you can already collect 3 beads, and also connect the threads in bicones in proportion to the base of the rim. To give the appearance and hardness of a ring strip, you just need to pull the thread through the last beads, return to the starting place and tighten the threads, forming an exact circle, as the diagrams in the photo show.

The next step is wrapping the bicone rings. You need to string 4 beads No. 10, return the needle to the previous cone, and also bring it close to the one located. Then pick up 3 beads, return the needle to the bead of the starting line and two bicones. It is necessary to repeat this work around the circumference of the ring. The braiding has the appearance of flower petals. Now you should tie the threads into knots, hide the ends or trim them. The beaded ring is already ready.

Shimmering Ring

It turns out that there are not only ordinary bead rings, but also real luminous jewelry that you can make with your own hands. And they are made from Miyuki’s unusual drop-shaped beads.

What you will need:

orange droplet beads;
Delica beads in olive and red tones;
half a cotton ball;
carrot colored thread;
white ribbon 2.5 x 2.5 cm;
beeswax.

You need to start making rings from beads by drawing 1/2 of the circle on the tape. Next, thread a conditioned thread collected in half along a length of 7.5 cm into a needle and work it with a seam along the strip marked on the ribbon. Now move away from the line by about 0.3 cm and cut in a circle. Using fire, carefully scorch the terry edges of the ring. Then tighten the ends of the thread, pulling the end of the ring a little. The ribbon will be shaped like a cup, as shown in the diagrams. You need to roll a cotton ball in your hand, put it in a ribbon and continue to tighten the ends of the thread around the ball. Next, you need to use the end of the scissors to push the protruding part of the ball into the tape, baste a stitch on the outside of the quilted strip and carefully fasten it from below. Finally, squeeze one of the sides of the ring to make the craft more smooth.

Now, using a needle, you can go to the top of the center of the ring band. You need to take one drop, thread the thread back through the fabric and out of it again. Now tighten the thread to place the bead near the material, continue to add beads in concentric turns until the entire plane of the ring is covered, as this master class presents. Using a thread 91 cm long, a segment 14 beads wide is made, as well as a segment of 8 beads in mosaic needlework rings. You need to make 4 more rows, reducing them from each part of the work, insert a thread through the beads in the direction of the main line drawn up in this step and make the appropriate reductions. This piece will be the start for the crown of the ring.

The skill of mosaic weaving continues along the base. It is necessary to make a ring of red beads 6 beads wide, creating a circle line. Next, cross the edges of the strip with the other part of the beginning of the ring so that they interlock like a zipper and tighten the beads at the same time. Then thread the thread through all the beads on the ribbon to pull them up and finish near the base point of the ring. Now you can place the decorated ribbon ball in the material section of the circle, tighten it with a mosaic openwork, securing it, and also cutting the thread. The luminous beaded ring can be considered complete.

Terry bead rings

With your own hands you can make not only ordinary bead rings, but also fluffy ones. The principle of operation of such a craft will begin with the production of fabric material, which will then be decorated.

Materials for work:

beads No. 11;
Delicas beads;
thread for beads.

A stop bead is placed on a thread 122 cm long, keeping the tail of the ring 10 cm. To make the first row, which is the width of the rim, you need to string Delicas beads, as the diagrams show. Using fabric weaving, and also guided by an example, it is necessary to make the rim of the ring at such a length that you can tie it around your finger. To start the fringe, thread a thread through the first bead in the last row. You need to put on 5 beads of 1 mm size of the same tone as Delicas beads. Now you should lower the beads down the rim of the circle, hold them and set them in place, holding thumb. “Jumping” over the outer bead, you need to thread a thread through 4 beads and a new bead to the rim of the circle. The fringe line should be well attached to the rim of the ring. To fill the top of the ring, you still need to go through about 2 cm of rows of beads. After the previous line of braid, thread the thread in the opposite direction to the initial row of the warp. Using a weaving seam, the ends of the tape are brought together to form a ring. This is such a wonderful beaded ring.

From this step-by-step master class you will learn how to make a beaded ring for beginners with your own hands. This ring is made of high-quality Japanese beads using the Mosaic technique and looks very stylish! A detailed instructions with a photo and a diagram will help you weave it correctly.

Tools and materials Time: 3-4 hours Difficulty: 5/10

Japanese beads in two contrasting shades;
beading thread;
base for earrings with a flat base 6 mm and a stud – 2 pieces;
needles in the set;
scissors;
glue for jewelry.

A beaded ring for beginners, despite its simplicity, looks stylish. If you also make earrings for it, you will be the envy of fashionistas!

Go beyond the ring, create an elegant set by making earrings in this style too! The key point these earrings have a flat base for insertion square weave, which gives the finished product a very elegant and professional look. Making these earrings is quite simple and is also suitable for beginners. And by doing the same steps, but playing with colors, you will create new decorations every time!

By following our master class, you will make a modern and fashionable set that is suitable for any occasion!

Step-by-step master class

So, let's learn the basics of beading by creating a beaded ring for beginners.

Step 1: Make 1 row

Cut about 1 meter of beading thread and thread it through the eye of a beading needle.

Add the required number of beads to the thread. After this, skip one bead and pull the thread back through the holes of all the added beads, forming a loop to secure the bead fabric and prevent it from moving. To build the first row of both the ring and earrings you need to add 10 beads to the needle.

Step 2: Form 2nd row

To form the second row, add the 11th bead to the thread and immediately after that, pass the needle into the 9th cylinder.

Pull the needle out of the 9th bead, add the 12th bead to the thread and pass the needle into the 7th cylinder. Repeat this process until you reach the 1st bead.

Step 3: Make a Triangle

Make a triangle with 6 cylinders at the base of the ring, for which you alternately add and subtract beads of a contrasting shade to the weave.

Continue weaving until you have 17 rows or the length you want for your ring.

Step 4: Finish the Ring

Connect the two ends of the beading by moving the needle and thread between the first and second edges alternately. Having finished weaving, hide the threads by drawing them diagonally through the center of the beads in different directions.

Step 5: Make the Earrings

Weave the earrings in the same way, shaping them to the length and width of your earring base.

Once you are done with the beading, attach it to the earring base with a few stitches, leaving the end of the thread in the center of the base from the back.

In addition, if you are a beginner and are still comfortable with beads, practice on beaded rings first: they are small in size, easy to make, and you will need very few materials to create them!

Where to begin?

So, how to make a beaded ring? To begin, choose a design that you like. Fortunately, on the Internet there are many patterns for weaving a bead ring with your own hands. These instructions can be the simplest, with a minimum of materials and a short period of time spent, or complex products with braided cabochons and the addition of various decorative elements. Regardless of the pattern you choose to weave a beaded ring, really evaluate your capabilities and make sure that making this jewelry is up to you.

Materials and tools

In accordance with the chosen scheme, select necessary materials. If you're missing anything, head to your local craft store and buy everything you need. Fortunately, there are plenty of such stores, and their range is simply huge.

What materials will you need to make a beaded ring for beginner craftswomen? First, you will need beads. Beads come in a variety of shades and sizes, high quality (Japanese or Czech) and not so good (Taiwanese and Chinese). Also, in accordance with the master class, you may need other materials: cabochons, beads, pearls, bugles, bicone or cutting.

Since you are creating a ring, you also need a base for the ring. For these purposes, you can buy a ready-made base with a universal sliding ring and a wide base with holes. On this basis, you can immediately weave a ring or glue it to it already ready product. You can also do without a base if you make the ring entirely from beaded balls.

In addition, you will need a standard set of beading tools: bead thread or fishing line, special thin needles and scissors.

How to weave a ring from beads?

So, you have all the necessary components and are laid out in front of you on the table. Next, in accordance with the diagram, weave a ring. As a rule, a weaving pattern is always accompanied by a master class with a detailed description and photo, so making a beaded ring should not cause you any particular difficulties. The main thing is to strictly follow the instructions, and even a ring that seems complicated at first glance will come out perfect!

We wish you success!

Soon significant date or family celebration? Do you want to be elegant and surprise guests with your jewelry? Then look at what kind of handicrafts you can make with your own hands from beads and seed beads. I suggest making such a beautiful ring! It's very simple. Our step-by-step master class will show you how easy it is to make this wonderful decoration.

We will need:

beads;
beads;
main fabric - canvas;
ring base;
embroidery needle, thread;
a small piece of leather;
hot glue.

First you need to take a small piece of thick canvas. It will be the basis for our needlework. Depending on what color your ring will be, dye the fabric in desired color. Since I did everything in a silver color scheme, I pre-painted a piece of the main fabric with silver paint. Glue a large rhinestone or stone into the center of the fabric. Take small beads and sew beads around the stone.

Add a row or two up the first circle. Make a setting for the stone in this way. Add gold beads or seed beads to the last top row.

Then place a row of medium pearl beads in a circle. They can be glued with hot glue. Look how beautifully you can do it.

After the beads are glued, we continue to design our beadwork. Along the bottom add a row of small beads of transparent and golden color. They need to be sewn to the fabric. Cut your workpiece along the contour of the last row. That's it, the base for the ring is ready!

Now we will attach the workpiece to the metal base of the ring. To do this, take a piece of leather that matches the color of your needlework. Using nail scissors, make slits for the metal base of the ring. Thread the workpiece into the leather.

Glue the beaded base on top using hot glue.

It’s already beautiful, but the beadwork is not ready yet. Trim the excess leather to the diameter of the embroidered base. Now you need to decorate the edge of the ring with beads to make the product look finished. Take a needle and thread that matches the color of the beads and lay beads along the edge of the leather, alternating beads: 3 small, 1 large.

A handmade bead ring looks very exclusive and original. Birthday is a wonderful date that every person celebrates with his family, loved ones and best friends. On this day it is customary to have fun and congratulate the birthday person with good touching words and give him nice gifts. Each invited guest tries to please the birthday person and make him happy an unusual gift. To a woman as an extraordinary suitable for a gift a luxurious ring woven from beads and bicones.

This article will talk about how to create original decoration from beads and bicones with your own hands.

Preparing for work

To create a chic beaded ring as a birthday gift, you will need the following working materials:

Sixteen bicones of the desired color, size - four millimeters.
Golden Czech beads, size ten.
Line with a diameter of 0.2 millimeters.
Scissors.
Bead needle.
Lighter.

We present to your attention a video tutorial on how to create a diamond-shaped ring from beads.

Video MK weaving rings from beads

Having thoroughly prepared for an exciting task creative process, you can start creating.

Master class on creating a ring

Weaving a ring is done using a simple technique, so any novice needlewoman can weave a decoration. To make it easier for beginners to cope with the work, I suggest that you familiarize yourself with step by step wizard class.

Weaving rings

We begin the process of weaving a ring by cutting a fishing line, one and a half meters long, which we thread into a needle. We use a bright yellow bead as a plug so as not to get confused in the process. We lower it down, leaving the end of the thread five centimeters.

2. We pass through the bead from the bottom up again and carefully tighten it.

3. String twenty-nine golden-colored beads.

4. We count ten elements and insert a needle into the eleventh fragment from top to bottom, as shown in the illustration.

5. We tighten the fishing line, forming a ring of ten elements.

6. We string five beads of the main shade and insert a needle into the sixth bead after the element from which the fishing line comes out (see the photo below). We tighten the line well and get another ring.

7. Based on the weaving principle described above, we form two more rings. As a result of weaving, we obtain a chain of four identical rings.

8. Let's move on to creating the second row. Insert the needle from bottom to top into three beads at once, as shown in the photo illustration.

9. We collect 5 beads, insert the needle into the third (middle) glass. (See bottom photo).

10. We repeat the above steps two more times.

11. We continue to weave the next tier. We insert the needle into three pieces of glass from top to bottom. When the fishing line has taken the right place, string 5 beads and insert a needle into the middle element of the next arc, tightening the thread well.

12. We form the next arc in the same way and move on to weaving the next row, in which one beaded arch is woven.

13. As a result of painstaking work, we got half a rhombus, in which bicones will be placed in each cell. We will weave the next half of the rhombus later.

We have just woven a rhombus from beads with our own hands and are starting to weave bicones.

Step-by-step weaving of bicone rings

We go through the last added glass from top to bottom. Next, insert the needle from bottom to top into the sixth bead (see photo).

2. We string the bicone and insert the tool into the glass opposite and the next two beads. Carefully tighten the line.

4. Thus, we weave all the other bicones into the empty cells.

5. Remove the plug, it will no longer be needed, and tie both ends of the thread with several knots.

6. Cut the short end of the fishing line and set it on fire with a lighter.

7. We continue to weave the second half of the diamond. To do this, insert a needle into the first three elements, string five pieces of beads, and form an arch. You should get three beaded arcs.

8. Using the same principle, we weave a rhombus to the end.

9. Having finished weaving the diamond shape, we thread the needle through five pieces of glass from bottom to top, then into the next element from top to bottom, as in the photo.

10. We collect a bicone and pass the needle through the opposite bead and the next two beads. Next we braid the free cells with bicones, just as we have already done with the first half of the rhombus.

11. It turns out to be a beautiful and neat diamond.

12. At the next stage of weaving, we bring the tool through the beads, as shown in the photo below.

13. We collect one golden bead and insert the needle into the element from which the fishing line comes out from the bottom up. Pull the thread well.

14. We insert the needle into the collected bead towards ourselves, collect the bead and pass into the second element from the rhombus away from us.

15. Then we insert the tool towards ourselves into the element we just typed.

16. We string one piece of glass and insert the needle away from us into the third fragment of the diamond and into the bead we just collected towards ourselves.

18. To secure the ring, we sew the created strap and the diamond fragments again.

19. Having finished sewing the ring, cut off the fishing line and burn it with a lighter.

As a result of painstaking work, the result was a chic ring that will become the best gift for a loved one's birthday. The birthday girl will be delighted with such a gift - after all, the homemade product contains so much positive and kind energy left by the needlewoman. A ring created by yourself is unique, inimitable and in a single copy, since the colors and elements can be changed at your discretion.

You can learn to weave more delicate ring made of beads and beads, which will not leave indifferent those who like to do their own handicrafts after looking next video. Good luck in your endeavor!