Health Pregnancy beauty

White openwork crochet pullover. Crochet jumpers and pullovers

A pullover is a jumper without a collar or fasteners, which often fits the body and also has a V- shaped neck. However, the types of cut can be very diverse - straight, loose, flared or fitted. And the neck can take other shapes other than V-shaped. It is made from knitted fabric or knitted. In this article we will look at how to crochet a women's pullover.

Summer pullover for women with open back

Light, airy and charming pullover with an open back for sultry summer days. He will create a worthy pair for any wardrobe item, be it mini-shorts or a floor-length skirt.

Clothing size 36.

To work you need prepare 300g. Cotton yarn "Lily" pistachio color, hook No. 1.7.

We will knit a pullover with an open back only with double crochets, but before that we need to make a full-size pattern.

Description

Let's start with the front. We cast on 114 air loops and add 3 lifting loops to them. We perform 43 rows with a double crochet, decreasing 1 loop in every second row. We knit the next 18 rows without decreasing. To decorate the armhole, in rows 62-65 you need to remove 3 double crochets on both sides. Next, we knit up to row 95 without changes. At a height of 66 cm, to cut the neckline, you need to close 38 loops, after which each side is knitted separately to a height of 68 cm.

The back is made similarly to the front. After the 28th row we make a neckline, because our pullover has an open back. To do this, divide the canvas into 2 equal parts, and mark the middle with a bright thread. In the 29th row, instead of two central double crochets, we knit two air loops. Next, up to the 52nd row, decrease 1 double crochet in each row and add 1 chain stitch. We knit the next 21 rows with the same number of air loops, and then we perform another 10 rows separately without chains.

When the fabric reaches a height of 68 cm, close all loops.

We assemble a pullover with an open back using the side and shoulder seams. Tie the bottom edge of the product, as well as the armholes and neckline with a single crochet.

Pattern diagram for a pullover with an open back

Delicate pullover for women from motifs, crocheted

Knitted white pullover consists of various motifs, which gives it a special charm. White color makes any clothes elegant. It follows from this that this blouse can be worn not only in Everyday life, and also for celebrations.

Finished product size 38. To work you need prepare: 400 g of white cotton yarn, hook No. 2, and a needle for stitching.

Description

We start knitting with a round motif. Its diameter is 10 cm. The motif is carried out in circular rows, in the direction from the center to the edges. We will need complete elements and incomplete ones (their halves). How to connect incomplete ones is indicated in the diagram with a line. They will be useful for finishing the bottom edge of the product and sleeves.

Diagram (15-1) of a round element.

Motive big flower(diameter 10 cm) perform as shown in the diagram (15-2)

The diameter of the average flower is 6 cm. Its pattern is 15-3

Motivchik small flower with a diameter of 5 cm is made according to diagram 15-4

We knit the leaf in straight and reverse rows. Scheme 15-5

The back pattern “oblique mesh” is performed in straight and reverse rows, according to diagram 15-6

We carry out all elements strictly according to patterns (15-1, 15-2, 15-3). The back is knitted with a “bias mesh” pattern, and the front and sleeves are knitted using the Irish lace technique.

We combine the finished elements into a single product - a white women's pullover, filling the empty spaces between the motifs with a “non-traditional chaotic grid” pattern.

We tie the neck of a sweater for women with 2 rows of single crochet and 1 row of “crab”

Tying with the “crab” method consists of single crochets, which are performed from left to right, with each leading loop being pulled towards itself.

Tie the bottom edge of the product and the sleeves with 2 single crochets and decorate with half-motifs.

How to crochet an openwork jumper: video master class

Women's crocheted pullover. Diagrams and description

Openwork blouse for women, consisting of flowers. What could be more tender and romantic? It is designed for summer and goes perfectly with any wardrobe item.

Finished product size 42-44

To knit a blouse for women you need to prepare: 200g of yarn, which contains 50% cotton, 50% acrylic and hook number 3

Description

Knitted women's pullover consists of motifs. The size of each element is 11 cm by 12 cm. We make them in the amount of 57 pieces according to the drawing in diagram 2. Then, each motif must be steamed with an iron and placed as indicated in the diagram. The shaded elements are located only on the back side. Sew all the motifs sequentially.

Melange crochet pullover for women

Lovely women's pullover with short sleeve, which is a mesh. It can be worn over a tank top, T-shirt, golf shirt, jumper.

The product is suitable for women who wear clothes size 36-40. For work we need: 400g cotton melange yarn Chat turquoise color, as well as a hook with number 6.

Description

We will knit a women's pullover in two types of patterns - basic and lace. The first of them is performed according to scheme 1. The number of loops must be a multiple of 3. To them we add 1 more loop and 3 more lifts.

We start with the loops before the repeat, repeat the repeat loops and end with the repeat loops. We repeat rows 1-2 three times, rows 3-10 once, and then rows 11-12.

We make the lace pattern according to diagram 2. The horizontal line under the diagram shows the 11th row of the front and back of the product. We knit the first 15 rows, and then repeat 14-15 rows 4 times. We finish knitting with the 16th row.

Let's move on to knitting the upper part of the product. For the right side, we cast on 58 chain stitches and knit with the main pattern, making additions for the bevels of the sleeves. At a height of 34 cm from the edge (row 22) we finish the work. The left side is performed similarly. We sew the seams of the sleeves, and then fold both parts and sew the bottom 15 cm for the back seam. Next, along the bottom edge of each side, knit 24 rows with a lace pattern and connect the halves with side seams.

Openwork pullover. Scheme of the “spider” pattern: video instructions

Women's long crocheted pullover

This pullover has an elongated shape and a mesh pattern. It can be worn in combination with many other clothes, and can also be used as a tunic.

Description of the implementation of this product is designed for several sizes. So, the jacket is suitable for women who wear sizes 34-36 (38-40) 42-44

For work you need to prepare: 250 (300) 350 g of turquoise yarn, which contains 70% cotton and 30% rofa-grain fiber, hook No. 4.

Description

We make a pattern according to our measurements and will refer to it during knitting. We perform the main pattern according to the pattern, repeating rows 1 and 2.

For the back, we cast on 92 (100) 108 air loops + 2 lifting loops and knit with the main pattern of 50 cm.

Then we make decreases according to the pattern for the armholes. 9 cm after the start of the armhole design, leave 22 (24) 26 unknitted loops for the neckline in the middle of the fabric, then knit both shoulder parts separately.

Finish the part at a distance of 18 (19) 20 cm from the beginning of the armholes.

The front is done in the same way as the back, only the neckline should be made deeper.

For the sleeves, we cast on 76 (84) 92 air loops + 2 lifting loops and knit the main patterns, making decreases for bevels and rollbacks. After 19 (20) 21 cm from the beginning, we finish the work.

We collect all the details in ready product. We tie the neckline with a single crochet and then with a crab step.

Pullover crochet– a universal wardrobe element. It goes with almost all clothes. And with a special knitting technique it can be used for celebrations. It all depends on the imagination and skills of the needlewoman. Even loops and quick rows!

Selection of schemes






BE BEAUTIFUL EVERY DAY: CROCHET PULLOVER

Women's knitted blouse straight cut, reaching to the hips. The blouse is decorated with an original openwork trim in the form of a braid. Slit sleeves look especially impressive. The model is crocheted.

Size: 48
Medium degree of difficulty.
You will need: approx. 200 g linen yarn; hook N^ 1.5.
DESCRIPTION OF WORK
Before: cast on a chain of 197 in p. (193 v.p. base + 3 v.p. rise + 1 v.p.).
1st row: 1 tbsp. s/n in 7th v.p. chains from the hook, 1 ch. * 1 tbsp. s/n in the 3rd v.p. base of the chain from the hook, 1 ch. *.repeat from * to * until the end of the row. Row finish st. s/n.
2nd row: 4 ch. (3 ch rise + 1 ch), 2 tbsp. s/n in the next 2 sts. s/n of the previous row from the hook. between the station s/n 1 v.p., 1 tbsp. s/n in the next st. s/n of the previous row from the hook, t st. s/n in v.p. previous row, 1 tbsp. s/n in the next st. s/n of the previous row from the hook.
Next, knit according to the row pattern. A number of laws, art.s.s./n.
Rows 3-62: knit according to the main pattern. To design the armhole line, skip 4 segments on both sides of the fabric.
63rd-65th rows: knit according to the pattern of the main pattern, decreasing 1 segment on both sides of the knitting.
66th-70th row: knit directly according to the pattern of the main pattern.
To design the neckline, divide the fabric into two equal parts. Skip 5 segments from the middle.
Perform the right shoulder in the same way.
71st-95th row: knit according to the pattern of the main pattern, decreasing from the middle of the front in each row by 1 segment, straight along the armhole line.
Back: knit according to the description of the front. Sleeve: cast on a chain of 102 chain stitches. (99 vp new + 3 vp rise)
1st row: 1 tbsp. s/n in the 5th v.p. hook chains 1 tbsp. s/n in v.p. base of the chain.
2nd row: 4 ch. (3 in p rise + 1 vp), * 1 tbsp. in the 2nd art. s/n of the previous row from the hook v.p. repeat from * to * until the end of the row. I finish st s-’n
Rows 3-55: knit according to the main pattern. To design the armhole line, divide the fabric into two equal parts. Skip 5 segments from the middle of the canvas.
Right side of sleeve:
56th-57th rows: knit directly according to the pattern of the main pattern.
58th row: subtract 1 segment from the middle of the field and knit according to the row pattern.
59th-61st rows: knit directly according to the pattern of the main pattern.
Rows 62-75: knit according to the pattern of the main pattern, decreasing 1 segment in each even row.
The left side of the sleeve is done in the same way.
Attach a new thread to the upper edge of the sleeve. Cast on a chain of 11 vp. (7 v.p. base + 4 v.p.).
1st row: 1 tbsp. s/n in the 5th v.p. hook chains, 6 tbsp. s/n in the next 6 vp. base of the chain.
2nd row: 2 ch, 1 tbsp. b/n in Art. s/n middle sleeve, 2 vp, 1 tbsp. s/n in art. s/n of the previous row, * 1 vp, 1 tbsp. s/n in the 2nd art. s/n of the previous row *. repeat from * to * 2 times. Only 4 times. Next, continue the work according to the braid pattern, attaching along the even edge of the sleeve. Do the left sleeve in the same way.

ASSEMBLY AND FINISHING
Tie the bottom of the product with 1 row of st. s/n. Tie the neckline with braid according to the pattern.

Dimensions: 36/38 (44/46)

You will need:

400 (500) g Sol Luxe yarn from LANG YARNS white(78% cotton, 22% polyester, 100 m/50 g); straight knitting needles No. 5.5 and 6, as well as hook No. 5.5.

Purl stitch: persons rows - purl. loops, purl rows - persons. loops.

Facial surface: persons rows - persons. loops, purl rows - purl. loops.

Special deductions:

At the beginning of the row, knit chrome. and 2 p. knits together; at the end of the row, the last 2 stitches before the edge. knit faces together. broach (= remove 1 p. as knit., 1 knit. and stretch it through the removed p.), chrome.

Dimensions: 34/36 (42/44)

You will need:

50 g of Kid Silk yarn from AUSTERMANN in mauve color (Fb 24), as well as 25 (50) g ​​each Pink colour(Fb 35) and grayish-beige color (Fb 10) (75% mohair, 25% silk, 225 m/25 g); hook No. 5 and 5.5.

Main pattern: the number of cast-on stitches is a multiple of 16 + 1.

Knit according to the pattern, starting with 1 purl. R.

Start with loops before the repeat, repeat the repeat and end with loops after the repeat.

Knit 1 x from the 1st to the 7th row, then repeat from the 2nd to the 7th row.

Sequence of alternating stripes:

Pullover sizes: 34/36 (42/44).

The pullover is crocheted.

You will need: 400 (500) g of Seta yarn from LANG YARNS coral color number 0028 (100% silk, 120 m/50 g), hook No. 3-3.5.

Border pattern: Knit according to pattern 1, performing it in several stages: first knit a separate square, the 1st square in the pattern is marked in gray.

For the 1st circle. row of the 1st square from a loop of thread, tie a chain of 2 air. p. for the 1st half st. double crochet and perform 7 half stitches. s/n, separated by 2 air. p., finish 1 connection. Art. in the 2nd replacing air. loop.

Tighten the thread loop.

Then knit according to the pattern from the 2nd to the 5th circle. R.

Every trace. perform the square in the same way, only in the 5th circle. R., as shown, connect on the side edge with the previous square.

Pullover sizes: 36-36 (38-40) and ((42-44)).

Data for sizes 38-40 are given in brackets (), for sizes 42-44 - in double brackets (()).

If only one value is specified, it applies to all sizes.

Pullover length: 55 (55) ((57)) cm.

You will need: 500 (550) ((600)) g yarn type LINIE 326 BANDELLO blue color number 02, knitting needles No. 12-15 and hook No. 5.

Main pattern: air p., art. b/n, art. s/n, art. s/2n.

Air number cast-on stitches in multiples of 4 + 3.

1st day: Art. b/n = number of loops is a multiple of 4 + 2.

2nd row: 3 air p. instead of 1st tbsp. s/n, * 1 tbsp. s/n, performing 1 air. p., skip 1 p. of the previous row, repeat from *, 1 tbsp. s/n.

Pullover size: 40/42.

Pullover size: 36 — 38 (40 — 42) 44-46.

Distinguishing data for large sizes are given in or behind parentheses.

Dimensions: 36-38 (40-42).

You will need: 550 (600) g of yarn Linie 257 Oceano denim blue - Fb. 05, hook No. 4.5-5.

Openwork pattern: The number of loops is a multiple of 10 + 1 + 1 air. lifting point. Knit according to the pattern 1 time from the 1st to the 7th r., then repeat from the 2nd to the 7th r.

Main pattern: The number of loops is a multiple of 4 + 1 + 1 air. lifting point. Knit according to the pattern 1 time from the 1st to the 5th r., then repeat from the 2nd to the 5th r.

Knitting density: openwork pattern: 15 p. and 8 r. = 10 x 10 cm; main pattern: 15 p. and 8.5 r. = 10 x 10 cm.

Top part: Knit a chain of 65 (73) air. n. and 1 air. p. rise, then knit with the main pattern.

Sizes: 36/38 (40/42)

You will need: 400 (450) g ​​of Season yarn in rosewood color (50% cotton, 50% merino wool, 110 m/50 g); straight knitting needles No. 4; hook number 4.

Sirloin pattern:

1st - 4th row: persons. P.;

5th row: alternately 1 person, 1 yarn over;

6th row: knit all stitches purl, slip yarn overs from the knitting needle. Repeat from 1st to 6th row.

Arched pattern (width 15 p.): knit according to the pattern, turn the rows as indicated. Start with loops before repeat, then repeat repeat loops and end with loops after repeat. Repeat from 2nd to 5th row.

Knitting density. Fillet pattern 16 sts and 24 r. = 10 x 10 cm; arched pattern: 23 p. and 10 r. = 10 x 10 cm.