Homemade ugg boots crochet patterns. Crochet UGG boots (diagrams and description)

Warm UGG boots, knitted by yourself, will warm your baby even on the coldest days. It will be especially nice that these warm UGG boots were created by the caring hands of a mother or grandmother. Knitting such boots will not be difficult even for novice craftswomen, the main thing is to understand the diagram, description and assembly, my master class and some useful tips will help you with this.

I took the description and diagram shown in the photo below as a basis. I won’t repeat the description, everything is already described perfectly. I will only demonstrate the step-by-step process of work and give some practical advice, which, alas, came to my mind after most of the boots were ready.

Children's knitted ugg boots: description and patterns

First of all, you should pay attention to the sole. The description suggests crocheting it, and it is double. The sole design is very simple. I knitted, as suggested, two blanks for each boot. But I wanted the sole to be even thicker. For these purposes, I tore off the thin leatherette sole from my old slipper. It was enough for me just for two soles for children's boots. I cut it out using a pre-knitted sole. I tied the leather sole with a half-column twist; how this is done is shown in the photo below.

We crochet a leather sole: pierce the sole and hook the thread

Then I used a connecting post to sew the leather sole to the knitted one (see photo and video below.)

You can also do the same and cut out soles from old leather items. But later I had a better idea. You can use a felt insole for the sole. In this case, there will be no need to crochet the sole at all. You can simply tie the insole as shown above and continue knitting the boot.

Unfortunately, this idea came to me too late. I found a lot on the internet interesting ideas with slippers made of insoles. And I decided that this knitted slippers for sure! I bought insoles. They are inexpensive - 50 rubles, and in the near future I will start working. All that remains is to choose a model. I will definitely share the results so you don’t miss out, subscribe to blog updates. Email subscription form in the right side column. Also on the section " Contacts/About the blog/About the author"(in the top menu of the site) you can subscribe to updates via social networks.

Next you need to knit ugg boots according to the description. I didn’t make any changes here, I knitted according to the instructions: I crocheted two more insoles and picked up loops from them and started knitting ugg boots with knitting needles, according to the description. Only at the end I knitted the bootleg higher. If you decide to knit ugg boots with a felt insole, first tie it as shown above, and then pick up the loops with knitting needles and knit the boots according to the description and pattern.

Using connecting posts, I sewed my double sole made of a knitted insole and a leather one to the finished boots.

The next step is crocheting the tongue and boot. I tied the tongue with a post, as in the description. And I simply trimmed the boot with brown thread, since it was already wide.

By the way, the description says that ugg boots are intended for children under one year old. My son is 2.2 years old and his leg is not small at all, on the contrary - quite large for his age. However, the ugg boots are in time for him, I think they will be enough for next year. I did not increase the number of loops; there are exactly as many as suggested in the description. In general, things always turn out bigger for me than indicated in the knitting instructions. I can’t say that I knit poorly or that the knitting needles are too large. I use size 2 circular needles. They are slightly thicker than regular double needles. But my threads are very thick, they are natural sheep's wool, purchased from local farmers. If you knit with regular thread, you need to fold it in half.

Sh I captured Irina and the length of the boots in the photo. If you need to knit smaller or larger, this is easy to do by following the sole. Knit the sole to the size of the child's foot and then cast on loops along the edges of the sole. There will be as many as there are. It will be easy to navigate further. In case of felt sole it will be even easier.

Now you need to embroider the pattern and weave the lace. The lace is braided with 4 strands. White threads cross with white, brown with brown. For convenience, I hooked the braid onto the handle of the chest of drawers. I cut the ends and tied them into a couple of knots. I hooked the lace into the boot and tied it.

But I gave up embroidery, since it took me a lot of time to create knitted boots, mainly because of the soles, and I no longer had the desire to tinker with them. In addition, this year winter came already in October and knitted ugg boots came into use. At home we have a strong pull on the floor, so these knitted boots for a child it is simply a salvation. His feet are always warm in them, even hot. In addition, they are soft, comfortable, and your legs do not get tired in them. And thanks to the leather sole, they do not slip and do not get wet if the baby accidentally steps on drops of water on the floor.

In other words, the knitted boots for the child turned out just wonderful. They may look different from what you expected, but they cope with their tasks with a bang!

Crocheting shoes is becoming more and more popular. And what kind of models can you come up with here and just find them on the Internet.

The warmer the model, the more chances it has for walking not only on the home floor, but also on a real street.

Some UGG models allow your feet not to freeze even at temperatures of -20 C. To do this, you need to have not only a talent for crocheting, but also be able to work with soles and insulation.

Any yarn is quite suitable for homemade ugg boots, which allows you to knit a hook. If the house is very warm, then ugg boots can be made from cotton threads.

But for the street it is better to work with denser and warmer threads. It is also worth paying attention to the thickness of the yarn; it should not be too weak.

Constant pressure - the thread simply cannot withstand it and will burst. And the whole product will therefore simply unravel.

The hook is selected after the yarn and strictly according to size. This is not a case where you can go up a couple sizes for a more airy fiber. Here you need to knit tightly and the tighter the knitting, the warmer the model will be.

Sample

Does it make sense to knit a pattern in this case? Absolutely, since shoes that don’t fit will simply be knitted in vain. Would you wear sneakers that are a size too small or shoes that are worn out? Here too, everything should be according to the size of the foot. Taking measurements is not that difficult. It only takes a few measurements to create a good shoe.

Just 6 measurements and you can start counting the loops and rows:

foot length;
small girth;
large girth;
oblique girth;
calf girth;
height.

Using the sample, we determine how many rows are needed for each indicator and how many loops. You can start - that's it preparatory stages passed. Let's look at the diagrams with descriptions.

UGG boots: models for beginners

Blue ugg boots for home

Very gentle and interesting model ugg boots with a beautiful sea pattern. Close knitting occurs thanks to single crochets.

To work you will need:

thick yarn 500 g;
hook number 4.

Sole

The sole for ugg boots must be knitted in two threads, like the entire product. Look at the diagram and add your rows depending on the length and width of the foot.

Climb

Using single crochets, without increasing or decreasing, knit 4 rows around the foot along the edge.

Toe

Knit from the middle half in a semicircle. Decrease in each row. First, one column at a time, then two or three. Depending on the product.

When the rows reach the middle, you will need to knit in circular rows with single crochets. At the same time, grab the entire circle and the remaining loops for a while along the back and sides. Knit 4 circular rows and go to the wave pattern.

Shin

Go to the main pattern, add loops if necessary. Alternate threads for the pattern. A wave of white thread and a wave of blue. This will produce the most distinct waves. It looks very nice. And the fabric turns out dense. When the UGGs reach the desired size, you can stop knitting. Hide the loops. If desired, you can additionally sew a sole along the bottom of the product, so the ugg boots will last a very long time.

Ugg boots with single crochets

This UGG model is very good and is made of pure cotton. Additionally, you can make insulation from fleece or any other dense and warm material.

To work you will need:

yarn 100% cotton;
hook number 4.

Knit the product in several threads. You can even use three strands if desired. This will only make Ugg boots stronger and more prominent.

Sole

Ugg boots must be knitted from the sole, which is also made with single crochet stitches. The circuit from the first model is suitable.

Before knitting, it is better to knit a small sample of single crochet stitches and see how many stitches and rows the model requires. How many columns are needed in the width of the foot?

Climb

You can draw a small plan and sign how much you need to add for the widest side. This will make it easier to make smooth additions.

Toe

Work two rows along the edge of the sole without increasing or decreasing using a pattern of simple single crochet stitches. Start the toe with 4 single crochets

Shin

, and so that they do not form holes along the edge, it is better to make single crochets on the sides of the columns (one on each side is enough). Next, knit rows with additions of one column at a time. Until the widest part of the foot is reached. Then the rows are the same, but without additions. Knit like this until about halfway through. Combine the thrown stitches of the heel and sides with the toe and knit in the round with single crochets

Uggs for a beginner

The most simple model- these are ugg boots for a beginner from the “granny square”.

To work you will need:

yarn with added wool 500 g;
hook number 3.

Each UGG boot consists of 13 squares. Knit the squares all the same according to the proposed motif. You will also need a sole.

There is no need to knit it; you can trim the edges slightly if it is large. Using a needle, make holes in it at a distance of 0.5 cm and crochet single crochets around the insole. Next, three more rows with single crochets and do not decrease or increase.

Knit 13 motifs in parallel and start stitching. It is better to start stitching from the heel.

The decoration and clasp are small pom-poms.. Thread them into the holes of the squares and tie them in a knot. Here are the beautiful ugg boots ready.

Crochet ugg boots. Miniature UGG boots, crocheted, look like fluffy toys. They are soft, but keep their shape well, because, firstly, they are knitted from acrylic, and, secondly, the single crochets (sc/sn), with which they are mainly knitted, provide a fairly tight knitting. The pattern from designer Schachenmayr is witty and practical, and it's immediately clear how to knit the sole, upper and cuff separately. Then it’s all put together, the seams are brought out so that they don’t rub the delicate leg. The seams are decorated with a fluffy trim, just like the top of the boots. The description suggests 2 options, for feet 10 cm and 12 cm long. The material used is acrylic yarn Schachenmayr Baby Smiles Bravo Baby 185 (50 g/185 m), consumption will be 1 skein. A 3 mm crochet hook is suitable for us, and we will use it to knit a sample: 24 rows of 26 st/bn = 10x10 cm. Free description of crocheting baby booties We knit the listed parts - the cuff, the top and the sole. Cuff We knit a chain of 30 - 32 vops ( air loops ). Add 2 more vops to provide lift. We work 1 st/bn in each rep = 30-32 st/bn. Next row: in the first loop (pt) we knit 2 dc; on each Fri until the very last we perform 1 sc/bn; 2 sc/bn = 32-34 pt. We perform this row with additions 2 more times in every 2nd row = 36 = 38 pt. We do not make any more increases and knit to a height of 6 cm. Next row: we work along the edges of the row, leaving the 10 central stitches untouched. From the inside we decrease 1 st, knitting 2 dc with a common top. We do this 7-8 times in each row, and as a result we get 6 stitches on each side - for the heel. Cut the thread and fasten it. The result is a cuff with a height of 9 - 9½ cm. Upper part Take the thread and join it to the right side of the cuff. Walking along the edge, we work 30-32 sc/bn all the way to the left side. We knit the next rows, 2-4, sc/bn, without changing the number of stitches. In the 5th row we decrease by 1 pt at the beginning and at the end of the row = 28-30 pt. We make such decreases 11-12 more times in each row and reach 6 points. In this case, the height of the middle part should reach 6½ - 7 cm. Cut the thread and fasten it. Sole We will knit it in a circle, expanding from the central axis. We knit a chain of 16-19 ch. First, we knit 2 dc in the 3rd ch from the hook; we knit the next 12-15 treble stitches, one in each stitch; in the next rep we perform 3 reps. We move to the second side of the chain: 12-15 st/bn; 2 sc/bn in the next question; we connect in the last pt in a circle with a s/st - a connecting stitch = 32-38 pt. 2nd round: - 2 reps; 2 sc/bn next Fri; we knit the next 13-16 sc/bn in each pt, one at a time; - work in the next 3 pts, 2 dc; we knit the next 13-16 sc/bn in each pt, one at a time; - 2 sc/bn next Fri; 1 s/st in vop = 37-43 pt. 3rd round: - 2 reps; 2 sc/bn next Fri; we knit the next 8-11 st/bn in each pt, one at a time; - we perform 1 dc/dc (half double crochet) in the next 3 pt; - 1 dc/dc (double crochet) in the next 3 pt; - 2 dc in the next 6 pts; finish the circle symmetrically = 45-51 pt. 4th round: - 2 reps; 2 sc/bn next Fri; we knit the next 9-12 st/bn in each pt, one at a time; - we perform 1 dc/dc in the next 3 pts; 1 dc in next 6 pts; - 2 st/bn in the next. 6 pt; finish the circle symmetrically = 53-59 pt. 5th circle: - 2 reps; 2 sc/bn next Fri; we knit the next 50-56 st/bn in each pt, one at a time; - 2 sc/bn are performed on the last Fri; 1 s/st = 55-61 pt. Cut the thread and fasten it. Assembly We knit, walking along the edge of the upper part, one row of sc/bn, then with a crawfish step - also 1 row. We carry out back seam, starting from the bottom edge of the cuff, leaving 3 cm open at the top. We connect all the parts as expected, while performing 2 rows of connections as we did for the upper part. We make a tie from a chain 30 cm long, stretch it like lacing along the open edge, starting from the back.

You will need: 250 g pink melange yarn; 80 g beige acrylic yarn; hook No. 4.5; 2 m of satin ribbon; 16 small rivets. Out. (concave) column b/n: tie st. b/n, introducing the hook from the faces. sides under the leg of the column of the previous row. Polust. with relief purl: knit a half-stitch, inserting the hook only under the back thread of the base loop
row. Art. s/n. with relief purl: knit dc, inserting the hook only under the back thread of the loop of the base row.

Knitting density, non-woven stitches: 13 p. and 14 p. = 10 x 10 cm

Sole: Using a beige thread, knit a chain of 24 air. etc., without tightening. 1st row: 2 air. p. lifting, insert the hook into the 4th air. p. from the hook and knit 1 half stitch, then knit 1 half stitch. in every air n. to the end of the chain, in the initial air. p. knit 4 half stitches. and continue knitting along the free edge of the chain, 1 half st. in every air p., in the last air. p. knit 3 half stitches. and 1 connection Art. in the 2nd air. lifting item; 2nd row: 2 air. p. lifting, 1 half tbsp. with relief. in the next 22 half-st., 2 half-st. with relief. in the next 4 half-st., 1 half-st. with relief. in the next 22 half-st., 2 half-st. with relief. in the next 3 half-st., 1 half-st. into the base loop for air. lifting point and 1 connection. Art. in the 2nd air. lifting item; 3rd row: 2 air. p. lifting, 1 half tbsp. with relief. in the next 11 half-st., 1 tbsp. s/n with relief. in the next 11 half-stitches, 4 x (1 tbsp. s/n with purl relief in the next half-stitch, 2 tbsp. s/n with purl relief in the next half-stitch., 1 tbsp. s/n with relief purl in the next 11 half-stitches, 1 half-stitch with purl relief in the next 11 half-stitches, 3 x (1 half-stitch with purl relief in the next half-stitch), 1 half st. in the basic loop for lifting, 1 st. in the 2nd st. next 14 p., 1 st. s/n with relief
purl in the next 8 sts. s/n., 4 x (1 tbsp. s/n with purl relief in the next 2 tbsp. s/n., 2 tbsp. s/n with purl relief in the next half st.), 1 tbsp. s/n with relief. in the next 8 sts. s/n., 1 half tbsp. with relief. in the next 14 half stitches, 3 x (1 half stitch with purl relief in the next 2 half stitches, 2 half stitches with purl relief in the next half stitch), 1 half stitch. into the base loop for air. lift point, 1 connection Art. in the 2nd air. lifting point; 5th row: 3 air. p. lifting, 1 tbsp. s/n with relief. in each loop of the previous row, 1 connection. Art. to the 3rd air. lifting item; 6th row: 1 air. p.i. 1 purl. Art. b/n in air p. lifting the previous row, 1 p. Art. b/n in each st. s/n of the previous row, 1 connection. Art. in air lifting item; finish the work.

Main part

Shaft and toe: Use a pink thread in 2 folds to tie a chain of 30 air. p., without tightening (or with a thicker hook); 1st row: 1 air. lifting point, insert the hook into the 3rd air. p. from the hook and knit 1 tbsp. b/n, then 1 tbsp. b/n in each air. p. until the last 10 air. p., 3 tbsp. b/n next air. p., 1 tbsp. b/n in every next air. p., in the initial air. p. knit 5 tbsp. s/n (toe) and continue knitting on the second side of the same chain, 1 tbsp. b/n in the next 8 air. p., 3 tbsp. b/n in 10th air. p., 1 tbsp. b/n in each air. p. to the end of the chain, 1 tbsp. b/n in the last air. st. and turn the work (= 68 st. b/n, including air st. lifting); 2nd row: mark the second of 3 sts on both sides of the chain. b/n, which were connected to the 10th air. p. from the beginning of the chain (i.e. from the air st. in which 5 tbsp. b/n for the toe were connected), because in these places additions will be made to form the top and sides; 1 air p. lifting, 1 tbsp. b/n in each st. of the previous row to the mark, 3 tbsp. b/n in the marked paragraph, 1 tbsp. b/n in each loop of the previous row up to 5 sts of the toe, 2 tbsp. b/n in the next 5 p., 1 tbsp. b/n to the mark, 3 tbsp. b/n in the marked paragraph, 1 tbsp. b/n in each loop to the end of the row, 1 tbsp. b/n in air p. lifting the previous row, turn the work; 3rd row: 1 air. p. lifting, 1 tbsp. b/n to the loop above the mark (to the middle of 3 tbsp. b/n, connected in the marked loop), 3 tbsp. b/n in the next loop, 1 tbsp. b/n in each next loop until the toe is added, 105 x (1 tbsp. b/n in the next loop, 2 tbsp. b/n in the next loop), 1 tbsp. b/n to the loop above the mark, 3 tbsp. b/n in the next loop, 1 tbsp. sc in each loop to the end of the row, 1 tbsp. b/n in air n. lifting, turn the work;

4th r.: 1 air. p. lifting, 1 tbsp. b/n to the loop above the mark, 3 tbsp. b/n in the next loop, 1 tbsp. b/n in each next loop until the toe is added, 5 x (1 tbsp. b/n in the next 2 sts, 2 tbsp. b/n in the next loop), 1 tbsp. b/n to the loop above the mark, 3 tbsp. b/n in the next loop, 1 tbsp. b/n in each loop to the end of the row, 1 tbsp. b/n in air n. lifting, turn the work; 5th, 6th and 7th rows: knit as the previous rows, making increases above the marks for the upper part, but no longer making increases for the toe, knitting 1 tbsp. b/n in each loop of the toe; Having knitted the 7th row, without cutting the thread, continue to knit only on one side of the work, continuing to form the heel and boot.

Left side : 8th r.: 1 air. p. lifting and 1 tbsp. b/n in each loop to the loop above the mark (middle st. b/n of the first addition of the previous row), 1 tbsp. b/n and turn the work; 9th and subsequent rows: 1 air. p. lifting, 1 tbsp. b/n in each loop to the end of the row. 1 tbsp. b/n in air p. lifting the previous row, turn the work. Having knitted 21 rubles from the cast-on edge. for the right shoe and 23 rubles. for the left boot (since the boots will be “fastened” at the back in different directions), finish the work.

Right part: fasten the thread on the second side of the previously knitted part, in a loop above the mark (on average, st. b/n of the first addition), 1 tbsp. b/n in each loop, including air. p. lifting the previous row, turn the work; 9th and subsequent rows: 1 air. step 1 lifting, 1 tbsp. b/n to the end of the row, including air. p. lifting the previous row, turn the work. Knitting 4 from the cast-on edge 23 r. for the right shoe and 21 rubles. for the left boot, finish the job.

Assembly: Place the shorter edge of the shaft on top of the longer one and sew the edges and heel 6 cm from the bottom edge. Sew the sole to the main part, folding the parts right sides inward; turn the boot inside out and, to close the previous seam (row of purl sts. s/n), sew the edges of the purl. Art. s/n of the penultimate row of the sole to the loops of the main part with a blind seam over the line of the previous seam.

Cut satin ribbon into 8 parts, 4 for each boot, and use rivets to attach them to the tops of the boots.

Uggs are boots with a soft top just above the ankle. Many people do not like to wear them outside in winter, thinking that they get wet, but it is unlikely that anyone will argue about the benefits and convenience of this model of boots as indoor shoes. Homemade slippers knitted or crocheted will be an excellent choice for winters and a faithful ally in the fight against drafts.

You can link them different ways and from any yarn of your choice; most often they choose wool or with a mixture of wool as the warmest. Ugg boots designed for the street, of course, have a hard sole; Many people prefer hard soles in house slippers, and in this case the easiest way would be not to cut them out of rubber yourself, but simply tie them around old slippers, having first gotten rid of almost all the fabric on them.

How to crochet ugg boots

Slippers are usually crocheted and much less often knitted, it’s just less convenient. Good way to knit such UGGs is to make them from several parts, namely the sole itself from old slippers, the toe of the boot, covering the leg to the ankle, the heel and the boot. Choose yarn; Don’t stop at just one color; knitted boots look no less beautiful if they are knitted from two or three colors matched to each other.

Take old slippers of your size, a strong awl (a needle, even the thickest one, most likely will not work at the first stage), a regular needle, scissors, a crochet hook and yarn. Cut off all the fabric from the slippers, leaving one sole with a narrow, about 2 cm, piece of sock in front. Poke holes around the perimeter of the sole with an awl and sew with a continuous seam.

This will be the basis for attaching the entire boot to it. To make a transition from this base row, knit one row with a single crochet, catching it on the base, and then a double crochet; repeat, alternating them and changing colors if you want, until the sole is knitted in 4-6 rows.

Do not tie the sock separately, it is left for later. Measure your instep and, for convenience, make a pattern for the toe of your future boot. Tie the entire element along it with a column of your choice, not forgetting, if you want, to knit any decoration or pattern. Sew this element to the slipper (here the rest of the old sock will serve as support).

Tie the heel, not forgetting to try on the workpiece. House shoes, even knitted ones, should not fit tightly. Alternate colors if you are knitting more than one color; after the heel, knit in the round until the very end of the sock. The last element is the top. It is knitted like a simple fabric, and then sewn into a kind of cylinder and sewn to the bottom of the boot.

Do not forget that towards the end the rows should become shorter - the top of the boots should be narrower, otherwise they will fall off. To prevent this, you can later thread a thin ribbon through the loops, which will act like an elastic band if you tighten it or loosen it more loosely.

This is the most noticeable part, and therefore it would be wise to decorate it with a pattern according to any of the patterns that you like best. You can make the pattern themed if you plan to wear them in winter - for example, from snowflakes. Sew both parts and repeat for the second boot.

How to knit ugg boots with knitting needles

Based on the knitting pattern for a regular sock. Knitted homemade ugg boots rarely have a hard sole, but you can always sew it on later using the same awl. You can knit the bottom of the regular one more tightly knitted slippers, you can make a slipper insert from fleece and put it inside a knitted one by simply sewing it together. Otherwise, use the pattern of a standard sock, just make it looser and higher in the boot, and decorate the boot itself with a specific knit or decorations - ribbons, buttons.