How to weave a quadruple fishtail from elastic bands. Fishtail made from rubber bands: the best photos and video master classes

Simple « Fish tail» made of rubber bands- a pattern with which every master begins his acquaintance with a new exciting type of needlework. Once you have mastered the most basic stitches, you can try making it multi-colored, or expand the weave by doing it in three or four rows. This pattern is also called in the American style - fishtail, and it always turns out very neat and beautiful.

Since this type of needlework is especially popular with children who are happy to learn, parents should be told about safety precautions before leaving their child with the rainbow loom set. Rubber products are fragile, and if handled carelessly, they can easily tear, bounce into the eye due to tension, and so on. Therefore, you should not bring your face closer to the machine, and if the child performs the product on his fingers, then they should also be moved further away from his face.

Fishtail made from rubber bands

If this is your first time deciding to do bracelet made of rubber bands “Fishtail”, then you need to start with the simplest weaving, for which you use a slingshot or only two pins on the machine, and sometimes it can even be done on your fingers if you don’t have the appropriate tool at hand.

For beginners, we can advise using only two colors at the beginning, this is enough to get a bright and original bracelet, and when you master the technique, you can use rubber bands of three or more colors, and even make rainbow bracelets.

Let's start the process fish tail made from rubber bands on the machine: the first one must be stretched in the shape of infinity and put on two pegs, be it a slingshot or a machine in which all weaving is done only on the first row. The next one is placed above the first one, there is no need to twist it anymore. The third one is put on in the same way, after which you can begin to form the first loops.

You can use a hook, which is usually more convenient, because with this tool you can pry up the loop and remove it from the post, but if you don’t have a hook at hand, then it’s quite possible to pick up the “ears” of the elastic with your fingers, pull it a little and throw it off.

First, you need to grab the first, outermost loop with the hook, and throw it off one, and then the second column, to the center between the two columns. Now you have the beginning of your weaving, as you can see, it is very simple.

Next, you need to put on another ring again, and again remove the loops from the bottom to the center. This pattern should be continued in the future; you can watch how your bracelet grows, and you should stop weaving only when your product reaches the desired length. Then you no longer need to put on new rings, drop the loops from the bottom until there is only one left on each pin, you need to hook them both onto the hook, and then put them on an S- or C-shaped clip-fastener. And with the other end we hook the beginning of our bracelet, and now you can try it on your hand.

If you watch, be sure to, following the advice of the master, make an inverted “Fishtail” made from rubber bands, video The lesson will help you master the basic subtleties of the process.

Bracelet made of rubber bands “Fishtail”

Before moving on to more complex weaves - triple or quadruple fishtails, we will try new master class, how to weave a fishtail from rubber bands flipped over. The weaving itself turns out to be very unusual and looks original on the hand.

For this type of weaving, we also need only two outer posts on the machine. The first one must be put on in a figure eight, as always when we are just starting our product. It needs to be lowered as far as possible on two pegs, and then two more rings should be put on top; there is no need to twist them.

We begin to perform the standard braided fishtail rubber bands: it is necessary to remove the lower loops and throw them between the pins; in order to make it more convenient to hook the loops, it is better to use a hook. Now the lower “ears” in the center overlap the two upper rubber bands. You need to remove the loops from two pegs at once, and then put the next ring on top. Every time you slip a couple of stitches, you should have three rows on the pegs. You need to repeat the previous step again: pick up the lower “ears” with a hook and throw them into the center, and then repeat this step again, having first thrown on a new ring.

If you just want to know how to weave bracelets made from fishtail rubber bands, then this scheme must be continued in the future, this scheme for making a bracelet has already been described in more detail on our website, but in order to better master it, you first need to watch the video lesson.

But we are moving away from the standard pattern, because now we want to make a more complex pattern. Now you can make the first inverted stitch. Please note that the pegs have three rows of rubber bands. On one side, you need to hook the hook to the middle loop (second from the bottom), pull it to the side so that it goes beyond the pegs. Now you need to pick up the bottom one, while the middle one needs to be kept pulled to the side. The bottom one must be pulled through the middle one and thrown over the top one. And then leave it in an extended position, it should be located between the pegs. Now repeat the same steps on the other side and your first inverted stitch will be completed. After this, a new ring is thrown on top to begin a new stitch, and this always requires three rows. This is the first simple rule in a complex process, how to weave bracelets from fishtail elastic bands.

The completed stitch resembles a classic one, but the difference is as follows: the bottom elastic band will pass through the middle one, and in the classic one it immediately falls on top of the other two.

The described steps must be repeated until the inverted fishtail reaches the length you need. Using a hook, you need to pull the middle one to the sides, then pry the bottom one from the middle and pull the loop onto the peg. In one step, the action is performed on both sides, unlike the “Spikelet” weaving, where the actions are performed alternately, but you already know, with interesting patterns.

Before you start, how to weave a fishtail from rubber bands, measure the circumference of your wrist so as not to make a mistake with the size and not make the product too long, because the process itself is very exciting and you may not stop in time. To complete this product you will need 40-50 rings.

When finishing the bracelet, make 2-3 regular stitches, removing the “ears” in the center between the pins. The last loops must be carefully removed from the posts with a hook and put both on the clasp, and its other end hooked to the beginning.

This weaving has one feature, and if at the end you have run out of the colors you used to make the product, and the required length has not yet been achieved, the final stage can be performed with any others that you can find by opening, because they will not be visible in the pattern .

And if you still have questions, how to complete bracelet made from fishtail rubber bands, video can be viewed online or on our website.

How to weave a fishtail from rubber bands

However, the most interesting technique weaving awaits us ahead - “Fishtail” made of rubber bands on a fork. You will be surprised, but thanks to ordinary cutlery you can make a wide, stylish accessory on hand, alternating your favorite shades.

You can do it on a machine triple fishtail made of rubber bands, and on forks you can even get a quadruple one, and the weaving pattern itself is almost the same for products of different widths.

Two forks must be secured so that their tines are directed in opposite directions, and can be secured with tape in two places where the legs touch. Now your instrument is ready, on which you will perform the original decoration.

As for colors, you can alternate 2-3 or more shades, it all depends on your desire, this will be the main pattern, and you also need rubber bands of a contrasting color, usually white or black, which will be the basis. This color will only be noticeable at the edges and will not spoil your drawing with its contrast.

Triple fishtail made of elastic bands

Interested, how to make a fishtail from rubber bands, you should try several techniques, and if for some reason you don’t like doing it on a fork, then you should try it on a machine to find your ideal technique. Forks save needlewomen when there is a desire to create a new decoration, but there is no special tool at hand.

The triple pattern means that there will be three rows in the main braid, but the forks have four cloves, so the central 2 and 3 will go in one. Thus, we put the first three elastic bands of the color of the base on the outer teeth and the central ones, twisting them in a figure eight.

After this, three rings of the color chosen for the pattern must be put on opposite cloves - 1, 2-3 and 4. Next, another base color on the nearest fork and the next row, including three rings on three pairs of opposite cloves and another horizontal one. Now, not counting the three rings of the base, which are located horizontally on one fork, we have three rows, which means it’s time to start throwing off the lower loops to get the first stitches.

Bracelet made of elastic bands “Triple fishtail”

Pay attention when you do bracelet made of elastic bands “Triple fishtail”, first of all, you need to throw the lowest horizontal one into the center, then move the other two horizontal ones, insert the hook into them, and pry up the lowest loops. When removing the lower loops, you must not overlap the horizontal rings of the base with them; they must remain free. On the other hand, you simply remove the lower loops by hooking them. Carefully remove the central ones, do not pull them too much, as they may tear.

Further process how to weave a fishtail bracelet from rubber bands, will come down to this algorithm: throw on the next row of the main color and horizontal for the base, and then remove the lower loops. You'll soon notice what an incredible pattern you create.

It turns out quite dense, and if you decide to make a quadruple fishtail, then you need to put four rings on each pair of opposite cloves.

Fishtail rubber band bracelet one of the simplest bracelets that are woven from colored rainbow elastic bands. It looks very nice and everyone will like to wear it. Weaving a fishtail can be done using a loom, on a special slingshot, on a table fork, and even on your own fingers.

This master class discusses the option of weaving a fishtail bracelet on a machine. This option is the most convenient, of course, if you have the necessary machine, since both hands remain free, and removing the elastic bands with a hook is much more convenient than with your fingers.

Read in this article:

What you will need to weave a fishtail bracelet:

• elastic bands of two colors (in this case, yellow and blue) in the amount of about 50 pieces;
• S-shaped clip clasp;
• hook;
• machine.

How to weave a fishtail bracelet from rubber bands?

To begin, place the machine in front of you with the open side of the posts facing you. All rows of columns must be on the same level (not staggered). Fishtail braiding is performed on the two outer columns.

Take an elastic band of blue color and put it on two posts, twisting it in a figure eight.

Next, put on, without twisting, the yellow and then the blue elastic band. Subsequently, when braiding a fishtail, alternate the colors of the elastic bands. You can also use three or more different colors. At the same time, weaving is done in the same way, you just need to alternate the rubber bands evenly to get a beautiful effect.

Now take the hook from the set. Grab the bottom blue elastic band on one side with your hook and pull it up, releasing it between the posts.

Repeat the same steps on the second side. The order in which this step is performed does not matter. this weaving, that is, you can always start from the left column or from the right, as is more convenient. It should look like this:

Lower all the elastic bands below. Place the next elastic band of the desired color on the posts.

Now hook the bottom yellow elastic band again, first on one side,

and then on the other.

Continue weaving until you reach the required length of the bracelet.

How to finish weaving a fishtail bracelet?

At the end of weaving, you should have two working elastic bands left on each column.

Remove the bottom one by pulling it out in the middle with a hook, first on one side, then on the other.

Now change the half of the remaining elastic band from one of the posts to the other. Like this:

Hook the S-clip with one hook onto both sides of the elastic.

Use the second hook of the S-clip to hook the initial rubber band, which was a figure eight. Remove the bracelet from the machine.

Wear your finished bracelet with pleasure and subscribe to new master classes!

Watch a video master class on weaving a fishtail bracelet on a machine.

In this instruction, I will tell you how to weave a “Fishtail” bracelet from elastic bands, or it is also called a reverse “Fishtail”. It's easy and interesting!

What you will need

You will need these materials:

• Colored elastic bands for weaving (I used: Pink, Red and Purple).
• Machine. In fact, a full-fledged machine is not at all necessary, just like a fishtail can be woven on an ordinary slingshot.
• Hook.
• C clip (or S clip).

Let's start the bracelet

To start the bracelet, pull the first elastic band (I used pink) on any two pegs from the edge of the loom. It should be stretched in a figure eight or cross pattern.

Then, simply place two elastic bands on top (in the usual manner). My order of rubber bands (from bottom to top): pink, purple, red.

After this, pass the hook under the second elastic band (purple) and pull it off. Hook the bottom elastic band (pink) under it and remove one edge from the peg. Do the same on the second peg.

The main and, probably, the only difference between the reverse Fishtail and the reverse is that here the bottom elastic band is removed from the column and threaded under the second (middle) elastic band. This is demonstrated in the photograph.

Adding links

At the previous stage, we got the first link of the bracelet. Now it's time to add new rubber bands.

Place one pink elastic band on top. After this, pass the hook under the second elastic band (this time it is red) and pull it off. Now hook your hook to the bottom elastic band (purple) and remove it from one of the pegs.

Repeat the same steps on the second peg. We have a certain cycle that consists of adding a new elastic band and putting the bottom one on top of it. Thus, there are always only 3 rubber bands on the pegs.

As you add new rubber bands of different colors, repeat this cycle over and over again! The bracelet will gradually “crawl” out of your machine or slingshot: D.

Finishing the bracelet

Once you have woven a bracelet long enough for your wrist, it is time to remove it from the loom.

Carefully remove the elastic bands first from one peg and then from the second. Hold the last elastic bands tightly with your fingers so that the bracelet does not unravel. Secure these elastic bands with a clip and you won't have to hold them with your fingers.

If you just need a little bit to comfortably fasten the bracelet on your hand, you can add elastic bands, as I showed in the photo.

Congratulations, you've just done a reverse fishtail. You can show and brag! 😀

Video lesson

GD Star Rating
a WordPress rating system

How to weave a fishtail in reverse, 7.0 out of 10 based on 4 ratings

The fishtail is the simplest and cutest rubber band bracelet as far as I can tell. 😀
Braiding a fishtail takes the same amount of time as braiding, but looks much better. It will only take you 10-15 minutes to complete it.

What you will need

• Kit Rainbow Bloom or any other set with a machine
• Rubber bands
• C-clips
• Hook from the set or any suitable one

If you bought a kit for weaving elastic bands Rainbow loom bands , indicated above, then you do not need to buy anything additional; you already have everything you need.

Let's start weaving

This part is fun because it's easy 😀

At the bottom elastic band, which is a figure eight, remove the left edge from the peg and throw it over the top two elastic bands. Repeat the same with the right side.

Now put a new rubber band on the pegs.

Continue the cycle by sliding the bottom elastic over the top, all the while adding more elastics to the top. Do this until the length of the bracelet matches the circumference of your wrist.

The main secret of weaving a fishtail bracelet is that you should always have 3 elastic bands on the pegs. Except for the first elastic band in a figure eight, all the others are positioned normally.

Grasp the bracelet by the last loop and remove it from the pegs. Never let go of the last link!

We remove the excess and fix it

3 ratings