How to do a hardware manicure correctly. Hardware manicure training for beginners

Despite the fact that the fashion for manicure changes every season, the fashion for well-groomed, clean, and neat nails remains unchanged. A hardware manicure can help keep them in excellent condition.

Features of hardware manicure

Hardware manicure has recently gained popularity thanks to positive reviews from clients about this procedure. It is a modern technology that aims to treat the skin around the nail and cuticle. In addition to the fact that the device quickly polishes the keratinized skin, it carefully processes the plate. To perform this you will need a special device. An important difference between this manicure is that it works with dry nails that have not been previously steamed.

A manicure of this type may exclude additional nail treatment, or may be combined with it, then it will have the character of a combined manicure. If the cuticle has a rough structure, then preliminary work with conventional manicure tools will be required, after which you can start working with the device.

Hardware manicure can be done at home or by a specially trained master. To start working with a professional tool, you will need preliminary training and experience. Therefore, to perform a manicure yourself, it is better to purchase a semi-professional device, which will eliminate the occurrence of injuries and cuts. A professional manicure machine performs procedures at high speeds.

Instructions for safe operation of the device

The tenderness and smoothness of the skin around the nail is achieved through the rotation of cutters specially inserted into the device. When working with it, it is important not to lose attention and be extremely careful. Before starting work, please read the included instructions. The difference between this procedure is that only dry skin is treated, which should be taken care of in advance.

At first, you need to do the manicure at low speeds and always make sure that the device is tilted in relation to the nail by about 45 degrees. The movements of the cutters should be directed from the center to the free edge of the nail and have the opposite direction to the rotation of the nozzles; the work should be done smoothly and slowly. It is also recommended to take breaks for long periods of 20 minutes to allow the equipment to “rest.”

Each step of working with must be completed. You should not do all types of treatments with one nozzle. When working with the device, you should not focus on pressing on the nail to press the attachment tightly, since excessive physical effort can damage the plate.

Manicure of this type It is prohibited for girls who have damaged nails, lamination or inflammation in the periungual area. The effect of the procedure lasts for 2 weeks.

Step-by-step instruction

Hardware manicure for beginners is something unknown and requires high concentration. To learn how to do a manicure correctly, you need to follow all the steps. So, hardware manicure step by step:

It is necessary to apply a special preparation to the cuticle to soften it. It contains fruit acids, thanks to them, the keratinized layer framing the nail is gently softened. This will prevent damage to the cuticle and make it more elastic.
Take a needle-shaped diamond fine-abrasive cutter and start processing the cuticles on the side rollers. The rotation speed of the cutter should be approximately 12,000 rpm.
Using the same cutter, without changing the speed, continue making movements along the cuticle, trying to lift it. You need to work smoothly and extremely carefully, otherwise you can injure the matrix. The handle of the device should be positioned in your hand in the same way as a regular writing pen; movements should be made exclusively according to skin without touching the nail itself, which can cause small grooves to appear on the nail. For convenience and confidence of movements, you can rest the little finger of your working hand on the other hand.
Take a truncated cone cutter and remove the already prepared cuticle; you must not touch the nail itself. The cutter speed should not exceed 1000 rpm. The correct position of the handle involves its tilt at 45 degrees.
Place a bullet-shaped cutter in the machine and sand the cuticles. At the final stage, the revolutions should not exceed 1200 values per minute.
If there are cracks or growths on the skin, it is advisable to use a spherical bur; it will delicately treat the surface.
Using a cylindrical nozzle, you need to carefully process the edge of the nail, giving it new uniform. Take the sanding attachment and begin to move it from the center to the free edge of the nail, thereby the nails will be “sealed”, since at this moment the pores are stopped, which creates a barrier that prevents the penetration of moisture particles. The plates acquire shine and become smooth.
Degrease your feet with a quality degreaser, not alcohol or nail polish remover. After which a base is applied to protect the nail.
It levels the surface of the plate and makes it perfectly smooth, which prevents chips and cracks. The base will increase the adhesion of the gel polish to the plate. After which gel polish is applied to the nails.
Secure the manicure with a top coat. It will provide a glossy shine.

The last two steps in the hardware manicure are done at will; you can cover the treated nails only with a vitamin complex so that they grow faster.

Any woman, of course, is familiar with the basics of manicure. Nails should be straight, burrs removed, varnish free of small cracks and untidy chips. Only hardware manicure can guarantee the listed criteria. You can also easily do it yourself.

Peculiarities

Hardware manicure is very similar in its implementation to the European method. The only difference is that if in one case cleaning of dead skin and roughness occurs with the help of hand-held devices, then in the other an electric device is used.

The device for performing hardware manicure resembles a small milling machine, which consists of a handle, a motor and a shaft with different attachments.

The complete absence of dangerous cutting instruments makes it possible to safely care for delicate skin with blood vessels located close to the surface. In order to remove the cuticle, a special rough nozzle is used, through repeated passes along it, the top layer of dead skin is carefully removed. Thanks to the processing technology, hardware manicure is considered not only the safest, but also the most practical, since with this device, even beginners can get a beautiful manicure done at home.

Cutters for performing hardware manicure

A set of cutters is supplied with the device, and in order to perform a certain operation, you need to know which attachments should be used. Typically, nozzles are distributed depending on what material they are made of:

Diamond. Designed for working with sensitive areas - the base of the nail plate, as well as for removing thin cuticles without preliminary damage. This type of attachment is very effective and expensive, as it allows not only to polish the surface uneven nail, but also provide a preventive effect.
Ceramic. This attachment can be found both in a set for professionals and in a simpler analogue for beginners. This cutter gets rid of calluses and hard calluses on the heels. Ceramic nozzles are classified according to grain size, ranging from 100 to 500 microns (the maximum is used for cleaning heels and feet).

To make your own hardware unedged manicure, silicon carbide cutters (one of the most accessible and inexpensive) are suitable for the initial procedure, which can be purchased at almost any cosmetic store. I would like to point out that these cutters are disposable. It is not advisable to use them for treating cuticles and nails, but they can be used to remove old calluses.

The set for hardware manicure has various types of attachments: conical, round, cylindrical and trapezoidal. Let's consider the use of some of them:

Reverse cone - used to process nails before performing a French manicure.
A spherical bur is a manicure attachment for getting rid of microcracks and rough growths. If there is rough skin around the nail, then this device will help clean the problem area of the epidermis without damaging the nail plate.
Cylindrical shape - used for shortening the nail plate, removing nail polish, performing designs and other manicure procedures.
Drum - allows you to remove dead cells from rough parts of the skin, trim your nails, aligning their growth line. This is the only option for cylinders with a narrow purpose, but it is indispensable for extensions or varnishing.
Polisher – provides shine and removes all roughness. It has the shape of a rounded cone and is made only from soft material such as silicone or plastic. A professional always has several types of this tool in his arsenal.

In order to do a hardware manicure at home, you need to purchase at least four types of attachments.

Step-by-step instruction

If you purchased an electric device and a set of attachments, then you should learn tips on how to do a hardware unedged manicure at home:

The entire process should take place only on a dry nail plate. A wet one will heat up, causing discomfort, and areas of the nail will be less treatable.
If you plan to use a combined device, then you need to set the rotation speed to a speed of no more than 10 thousand revolutions, since without some experience at a higher speed you will simply erase the nail plate.
Do not put pressure on the machine when working and press it close to the nail.
Make your first few attempts on silicone pads, this will allow you to study the operation of rough tips. You will have an idea of how to hold them correctly, what angle is most comfortable and how long it will take.

Instructions and technology for hardware manicure step by step

The cuticle should be pushed back to the hole of the nail plate with a wooden stick.
It and the side rollers on the sides of the plate can be processed with a medium-hard drum. Trust your feelings; if it seems to you that the attachment removes a lot, then take a tool with a different grain size.
Cleaning dead cells on the palms and fingers should be done using a soft ball-shaped bur.
Use a cylindrical nozzle to give the nail plate the desired shape.
Next you can start polishing. The technique for performing this stage may seem difficult for beginners. Watch the polisher; it should not be close to the nail plate, as scratches will appear on it. Try not to hold the polish in one place for more than one second.
Clean the surface from dust and nail residues and lubricate with oil, after which you can begin applying varnish.

Benefits of hardware manicure: cuticle removal occurs without the risk of damaging the skin and blood vessels around the nail plate; regular procedure slows down the growth of the cuticle; the result lasts 2-3 weeks; it is possible to correct the nail plate; infection and spread of the fungus is impossible; problem nails are also treated.

Flaws: expensive equipment; you need to undergo special training; there may be pain during the procedure if it is performed by a beginner; There are some contraindications (too thin nail plates with increased fragility and others).

Rules for hardware manicure: the nozzle should not be pressed too tightly against the nail plate; the surface of the nail should be dry; the device is held in the hand exactly like a writing pen; all movements are performed from the center to the edge, without stopping in one place. Every 5-7 minutes the device is turned off and given a “rest” for literally 2-3 minutes.

Step-by-step technique for beginners: use a wooden stick to push back the cuticle; a “drum” cutter is inserted into the device, it processes the cuticle and skin ridges around the nail plate; the cutter is changed to a soft spherical one, the surface around the nail, along its hole, is cleared of dead cells; change the cutter to a trapezoidal or cylindrical one to correct the shape of the nail and its length; polishing the nail (remember 2 rules: the edge of the polishing cutter should not be brought to the nail plate; make sure that the roller does not linger in one place on the nail for more than 1 second). Remove dust, cover the plate with decorative varnish (if required), lubricate the cuticle and side rollers with nourishing oil.

The procedure can be carried out no more than once every 2 weeks..

When choosing a device for hardware manicure, you should evaluate: speed of revolutions per minute (recommended range 20000-30000 rpm), operating conditions of the device (stationary or portable (portable), availability of warranty, nearest service centers, fastening of attachments (the mechanism must be light and reliable), reverse function , which is used to treat the surface of the nail plate, nozzle ( general rule for them, the diameter of the shank, which is inserted into the device itself, should be 2.35 mm; it can be diamond, ceramic, polishing, or from harder and more rigid materials).

Popular models: Aurora, Strong, Marazón and Escort, cost ranges from 6,000 to 17,000 rubles; Podomaster and Xenox, price from 6,000 to 51,000 rubles; Charisma, cost 7,000 rubles; Khorsa, price within 10,000 rubles and above. You can buy it cheaper for study.

If the master works according to the classical scheme trim manicure, then he uses sharp tools and pre-steams his hands. This greatly increases the risk of skin injury; the client is forced to closely monitor the specialist’s work and be on edge all the time. Hardware manicure allows you to completely relax and receive only pleasure - no fear, no pain.

Naturally, this type of nail care also has some disadvantages:

The procedure requires special equipment and this is not a classic manicure set for 300 rubles;
to perform a hardware manicure, you need to undergo special training and know what attachments are used and at what speed it should rotate for safe nail treatment;
if the master is inexperienced, then painful sensations may occur during the procedure;
there are some contraindications - for example, you can’t do a hardware manicure on too thin nail plates ah with increased fragility.

Ceramic– are distinguished by the presence of small “pits” and bulges on the surface, which provides an excellent result after nail treatment. Such attachments can be used for all manipulations within the framework of a hardware manicure; they just cannot be used to clean the area under the nail.

Polishers– can be silicone or natural. In the first case, they are used to work with extended nails, but natural polishers do an excellent job with a “clean” nail plate. They can work “dry”, or you can use special cosmetic oils, which will nourish the nail and make it shiny, like after applying a protective coating.

Nail polishers (polishes)

Separately on sale are cutters that are made of fairly rough metal and are used for primary, aggressive treatment of the nail and the skin around it.

Aurora, Strong, Marason and Escort - made in Korea, the cost ranges from 6,000 to 17,000 rubles;
Podomaster and Xenox - manufactured in Germany, price from 6,000 to 51,000 rubles;
Charisma - China, cost 7,000 rubles;
Khorsa - made in Russia, price ranges from 10,000 rubles and above, depending on the category and functionality of the equipment.

Watch the video review of the manicure device Harizma h10402:

There are models with lower prices, but it is hardly possible to check their quality, much less obtain a guarantee for the product. In principle, even devices costing 2000 - 3000 rubles can delight you with their work throughout the year.

Equipment care

To avoid the need to purchase new equipment, you should work with it strictly according to the instructions. For example, it will not be possible to press the nozzle or cutter too hard on the nails - this can even lead to the bending of the handle of the device, which makes it impossible to further use it.

Some models are equipped with a special key with which you can change attachments and cutters - you only need to work with them, the use of other “improvised” means leads to damage to the fixation mechanism.

After each manicure procedure, it is necessary to clean the equipment:

Each nozzle and cutter is wiped with a cotton swab or disk - the surface is freed from dry particles of the epidermis;
all elements are washed under running warm water;
be sure to place the attachments/cutters in a disinfectant solution or a special sterilizer (the second option is preferable);
All these components of the device are stored in a separate closed case.

Hardware manicure has a lot of advantages and very few disadvantages. The ability to quickly learn all the manipulations and the availability of equipment have made this procedure popular among lovers of independent nail care. If you follow all the recommendations and instructions for the equipment, there can be no complications - nail care will not only be of high quality, but also absolutely safe.

Shared

Neat and well-groomed nails are a must good image. It is this detail that catches the eye and affects the impression that a person makes on others. Fortunately, a beautiful manicure today has become accessible to almost everyone: there are many techniques for both professional and amateur home use. Hardware manicure is gaining particular popularity - one of the safest and convenient ways nail care.

The mechanism of action of a manicure device is similar to a file: the rough surface of the nozzle erases the top dead layer of skin. Since this does not leave an open cut, microcracks and burrs do not form.

The main advantages of hardware manicure are its gentle effect on the skin, versatility and long-lasting effect. This technique suitable for varnished or problematic nails, as well as for extensions, since it does not injure the nail plate and the skin around it. It is also suitable for calluses, dry skin, and ingrown nails.

Among the contraindications of hardware manicure, the following should be noted:

fungal diseases
inflammation of the skin around the nail
depleted nail plate

Manicure with a machine is done only on dry hands. Under no circumstances should they be steamed or moistened before work. In addition, it is important to maintain sterility: disinfect instruments and hands. Before getting a manicure, carefully familiarize yourself with the technique and the rules for using the device.

What is needed for a manicure

For the manicure procedure you will need the following tools:

manicure apparatus;

cutters - attachments for the apparatus;

brush for shaking off cut skin;

wooden cuticle stick.

Kits for hardware manicure contain the device itself and several basic attachments.

As a rule, a minimum set of cutters is included with the manicure machine. different forms: spherical, cylindrical, fissure and needle-shaped. Each attachment is used at different stages of manicure:

a ball-shaped nozzle is used to remove problematic epidermis around the nail;

the disc attachment is used to remove the length and correct the shape of nails;

a cylindrical cutter is necessary for removing dead skin, correcting the shape of the nail and removing the coating;

The application of a cone-shaped cutter is similar to that of a cylindrical cutter;

a fissure cutter is needed for processing and polishing nail folds;

The needle-shaped nozzle is used to remove cuticles in hard-to-reach places.

Nozzles come in different shapes, each with its own area of application.

The nozzles also differ in the material from which they are made:

Diamond - differ in rigidity and for a long time service - up to one year. They are convenient for removing calluses and minor skin defects.

Ceramic ones are less wear-resistant than diamond ones. Their service life is 30–50 days. However, these attachments are softer and safer, which is why they are recommended for use by beginners.

Silicone and cotton - used for polishing nails and nail folds.

There are several nozzle materials with different properties and service life.

Sterilization of instruments

The easiest way to sterilize instruments is to wipe them with a special solution that can be bought at a pharmacy. For example, the disinfectant Sterillium or Veltosept is suitable. This method is used if the attachments are used by only one person.

Veltosept is used for sterilization of manicure instruments

Sterilization of attachments using heat treatment is considered more effective, but it is only suitable for metal instruments. It is enough to ignite them in the oven at maximum temperature for 15–20 minutes or boil for the same time. After processing, it is important to dry and put the instruments in a case or bag so that they do not become dirty again.

How to do a hardware manicure at home: 9 simple steps

To properly do a hardware manicure, follow the following procedure:

Remove polish from the nail plate and wipe your hands with a disinfectant.

Give your nails the desired shape using a cone-shaped nozzle.

A special nozzle is used to create the shape.

Use an orange stick or pusher to push the cuticle back to the base of the nail.

It is necessary to lift the cuticle and separate it from the nail, so that later it is convenient to file the skin with a clipper

Remove dead skin from the nail folds at a speed of no more than 5 thousand revolutions. It is best to use a cylindrical or cone cutter.

The upper keratinized layer of skin is removed using a cylindrical attachment.

If necessary, remove calluses using a medium-hard brush.

Remove the cuticle using a medium-hard nozzle: a cone-shaped, needle-shaped or cylindrical cutter with a sharp edge. Periodically remove the cut skin with a brush.

Cuticles can be removed with a variety of medium-hard brushes.

Use a needle-shaped nozzle to file off any remaining skin under the side bolsters and in hard-to-reach places.

Polish the nail and nail fold with a silicone nozzle or buff.

Soft cylindrical or fissure nozzles are used to polish the nail.

Wipe your hands with disinfectant and moisturize your skin with cuticle cream or oil.

Hardware manicure video tutorial

How to use a manicure machine

Doing a manicure using a device is easier than it seems at first glance. The main thing is to follow the rules for working with the machine:

Insert the nozzle into the device. Depending on the model, this may require turning the mount or simply screwing in the cutter.

To begin with, set a low speed to get used to the operating technique, and then gradually increase, but not more than 10 thousand revolutions.

Holding the device like a fountain pen, position the nozzle at an angle of 45° and move it across the skin with slight pressure from left to right if you are right-handed, and from right to left if you are left-handed.

The angle between the nail and the nozzle should be approximately 45°

Do not keep the attachment in one place for a long time to avoid damaging the skin.

Follow the work steps described in the step-by-step instructions.

If you are using an amateur device, take short breaks every 10-15 minutes. Information on the permissible operating time of the machine can be found in the instructions supplied with it.

Manicure with one cutter

When working with one attachment, it is important to perform all stages one by one, just as when doing a manicure with several cutters. To do this, you can use tools for regular manicure, combining hardware and trimming techniques. In this case, the main purpose of the cutter does not change:

So, using a ball-shaped nozzle, the device cuts off the dead skin around the nail and a small top layer of cuticle, and the rest is cut off with nippers as usual.
Using a truncated cylinder cutter, you can remove keratinized areas of the nail ridges, applying the attachment over the entire surface, and remove the cuticle with the edge of the cylinder. After this, all that remains is to correct minor irregularities, which can be easily handled with wire cutters.
Using a needle-shaped nozzle, you need to lift the cuticle and separate it from the nail. To do this, you need to very carefully move the cutter under the cuticle and nail folds, but not too deep. After this, it will be convenient to cut it off with nail scissors or nippers.

When using any cutter, polishing is required at the end, which, in the absence of an appropriate attachment, is carried out with a buff.

Video tutorial for manicure with one cutter

Manicure with two and three cutters

If there are several attachments, then each is used in accordance with its purpose. As in the previous case, it is necessary to carry out all stages of the work, replacing the missing cutters with other cutters or cutting manicure tools.

For example, a spherical nozzle is used to remove rough skin, a cylindrical or fissure nozzle is used to remove cuticles, and residues and irregularities are removed with a needle nozzle.

You need to understand that it is easier to work with several attachments, especially if you have little experience. Therefore, it is better to have at least a minimum set of basic cutters.

Deep manicure

To make the cuticle grow slower and the manicure to last longer, you need to cut off not only the top layer of dead skin, but also remove the area under the cuticle. To do this, use a needle-shaped nozzle.

Thanks to a deep manicure, you can apply the polish closer to the base of the nail, which will extend its wear life.

How to do a manicure without cutting tools

A high-quality hardware manicure without cutting tools can be done with at least two cutters, including a needle-shaped and cylindrical or fissure cutter. If you have a basic set of attachments, there is no need for cutters and scissors.

How to avoid damaging your cuticle

With a hardware manicure, you can most often get injured if the cuticle is poorly separated from the nail. Then, trying to move it away, you can make an unsuccessful movement and injure your nail or skin with the router. That is why you need to separate the cuticle before starting to work with the device. For the best effect, it is recommended to use a remover - a product that softens the cuticle and slows down its growth.

Removers are either acidic or alkaline. The former are distinguished by a more aggressive composition and faster exposure time - 1–2 minutes. The latter act more slowly - 15–20 minutes. This product is used both at home and in salons. The remover should be applied to the cuticle for the time specified in the instructions, and then using an orange stick, move it to the base of the nail. After this, you need to dry the skin with a napkin and remove it with a device.

Using a remover greatly simplifies the process of hardware manicure.

How to give yourself a hardware manicure

It’s easier to do a manicure yourself if you’ve had such experience in a salon before. This way, the technique for performing it will become clearer and, based on step-by-step instructions, you will be able to repeat the same thing at home.

It is also useful to try how the device works before starting work, using a soft nozzle at low speed. After this, repeating the same movement with a rigid cutter will be much easier.

Perhaps the most important thing when doing a manicure for yourself is to find a comfortable support for the hand with which you hold the device so that it does not come off during use. To do this, you need to sit comfortably and free up free space on the table. You can put a stand or some solid horizontal object under your hand.

In general, doing a manicure for yourself is no more difficult than for anyone else. On the contrary, it will be easier to control the device based on your feelings. This means that you will be able to get used to the technology faster.

How often to do

A hardware manicure will help save a lot of time: firstly, with enough experience it can be done in 15–30 minutes, and secondly, thanks to the possibility of deep cutting of the cuticle, a manicure can last much longer than a trimmed one. Depending on the rate of cuticle growth, the neat appearance of your hands lasts for 2–4 weeks. You can increase this period by using a remover.

Features of men's hardware manicure

In general, women's and men's manicures are very similar. The technique of working with all its stages is absolutely identical.

The main difference is the attachments used. Men's cuticle is denser than women's and is more prone to the formation of burrs, so you need to use harder cutters and pay more attention to working with problem areas. Also, the nail plate of men is thicker, but it is easily injured if improperly filed. This feature must be taken into account when correcting the shape and polishing the nails.

Men's manicure is not very different from women's, but still has some features

Modern women are increasingly turning to professional craftsmen manicure to create perfect nails! There are quite a lot of methods used by specialists, and one of the most popular is hardware manicure, which came to us from Europe.

What is a hardware manicure?

Working the old fashioned way, preparing the nail plates for manicure, the master trims the cuticle with special cutting tools, then polishes the nail itself making it perfect. The hardware method eliminates rough trimming of overgrown skin with tools. Preparatory stage is performed by treating skin growths and nail plates using a special apparatus, which is equipped with different attachments, depending on the type of activity.

This technique is recognized as being as gentle as possible compared to trimming technology. Thanks to it, it is possible to maintain the same structure of the nails, they remain strong and healthy. Caring for nails in this way is allowed no more than twice a month.

Which manicure is better: hardware, edged or combined?

Hardware treatment of the nail and cuticle is considered better than trimming - a primitive, gradually becoming outdated technique, especially when it comes to problematic, deformed nails.

The procedure is performed much faster and the risk of injury is minimal. After all, when working with a nozzle, the master does not cut, but cleans the desired area of the keratinized skin area. Grinding and sharpening of the nail plate is performed under a certain pressure, evenly.
Many experts consider the combined method to be much better than the hardware and trimming method, since this technique includes both technologies simultaneously. The specialist, studying the structural features of the nails, alternates between instrumental and hardware methods of correction, giving even the most problematic nails unimaginable beauty.

Advantages and disadvantages

The technology has many advantages:

removing dead skin, the healthy area is not affected;
cuts and other injuries are excluded;
prevents infection;
the cuticle after such treatment grows back more slowly than, for example, when cut with scissors;
The processing technology eliminates preliminary steaming of the fingertips; everything is done in a natural state. A careful, gentle attitude preserves the healthy structure of the nail plates; after treatment they do not burst or peel;
ideal for problem nails and dry skin around them;
ideal for pedicure, a variety of attachments allows you to remove dead skin from the heels and clean off calluses;
thanks to different grinding speeds, ideal beautiful shapes even extended nails.
In addition, this technology takes little time, and the result is amazing. Beautiful manicure lasts a long time, the nails remain elastic, healthy, the plate does not deplete. However, despite the large number of advantages, there are disadvantages, like any technology:
the technique requires a certain skill, novice professionals often cause injuries, leaving furrows after work;
the inexperience of the specialist leads to an unpleasant sensation, clients feel vibration of the device, some complain of a slight burning sensation;
it is difficult to get an absolutely clean manicure, such as with instrumentation;
doing work on a steamed finger, the skin will tear;
The technique is not suitable for brittle, thin nails.

There are not so many disadvantages, the main thing is to learn how to use the device and feel it. Therefore, when going to the salon, you should find out about the professionalism of the specialist, and then trust him with your fingers!

What is included in a professional hardware manicure kit?

Many manufacturers specialize in the production of electrical devices with which this procedure is performed. Professional kits may differ slightly in component parts, but in general they have almost the same thing:

main device (handle) with cord (battery);
nozzles

The main packaging is a plastic, wooden oval (rectangular) container or leather case, equipped with holders for cutters (nozzles). Additionally, there are sticks that are used to remove cuticles, baths, UV lamps, and fans for drying.

Set of attachments for hardware manicure

Depending on the cost of the device and the manufacturer’s ideas, the electric “machine” may have several attachments, usually about nine of them:

sapphire discs, different diameters, different abrasiveness;
diamond, ceramic cutters, polishers, grinders;
cones, bur - round, cylindrical, sapphire, needle-shaped;
nozzles (curved, cone-shaped, spherical) for removing cuticles.

To clean the attachments, the set includes a special brush.

Processing tools for hardware manicure

Each use of the kit ends with cleaning it. The nozzles are washed with water, and adhered skin particles are removed with brass brushes. A good option Ultrasonic cleaning is considered cleaning. Afterwards, disinfection and sterilization of used parts is necessary. Disinfection is carried out by wiping objects with antiseptic solutions and sterilizing them in special cabinets (using Glasperlene sterilizers and dry-heat cabinets).

Step-by-step implementation of hardware manicure

Before starting the procedure, the first thing the master does is clean the nail plates of varnish. No steaming or water treatments can be performed. Hands must be completely dry. Next, the wizard performs several basic manipulations:

treats the cuticle with a softening substance, lifting it with a wooden stick and pushing it to the base;
after the skin has dried, the main treatment begins;
give the correct shape to the nails;
tidy up the side surfaces of the skin (clean off the stratum corneum, grind it) using medium abrasive discs and a cylindrical attachment;
Using a ball-shaped nozzle, remove the desired part of the cuticle at an angle of 45°;
Before treatment, the thin, depleted cuticle is first lifted using a cone-shaped nozzle;
Calluses are removed from the palms and fingers and cleaned with abrasive discs;
Polish the nails using a silicone trapezoidal cutter and a nap attachment.

Additionally, if necessary, clean the nails using tools.

Is it possible to get hepatitis from a hardware manicure?

By performing a hardware manicure, the risk of contracting infectious pathologies, including hepatitis, is significantly reduced. However, if a non-professional is working, who is negligent in handling the instruments, the device itself, then yes, it is quite possible to become infected not only with hepatitis (B, C), but also with AIDS, HIV, papillomavirus, and fungal diseases.

Popular devices for home use

Increasingly, women prefer home manicure, buying inexpensive devices. The best in this regard are devices from well-known manufacturers:

Gezatone 130D;
Rowenta MP7018;
POLARIS PSR 0902;
Scholl Velvet Smooth;
Scarlett SC-MS95005.

Each of them is a professional kit, which even an inexperienced beginner can learn to work with if desired. The machines differ in power, operating speed, number, type of attachments, cutters. Milling cutters of various diameters and abrasiveness will be the ideal tool for creating different shapes.

Some cutters allow you to quickly and safely remove old varnish. The majority of the machines are suitable for performing pedicures at home. With their help, corns and calluses are easily removed.

The cost of the kits starts to vary from 1,500 rubles.

Contraindications

swollen, swollen, inflamed cuticle;
there are scratches and wounds on the skin;
the nail plate is affected by a fungal infection;
thin cuticle;
microvessels pass almost on the surface of the cuticle.

The appearance of various types of neoplasms in the area of the nail plates, their severe deformation as a result of early injuries.

Review

Tatyana, 37 years old
“I ordered a professional set for home manicure Scarlett SC-MS95005 via the Internet for 1,700 rubles. I was immediately pleased with the ease of use and the absence of much noise during operation. Beautiful design, small size, plastic body.
The set is suitable for manicure and pedicure. It has a bath for hydromassage, drying (mini-fan) and 11 nozzles. Works autonomously and from the network. Two speed modes, maximum speed – 9000.

Tourmaline tips, easy to use. I am not satisfied with the quality of work of some attachments, and I consider some to be superfluous. I also think that the downside is that the dryer is not suitable for drying gel polishes. Overall, the machine works excellently, with its help I can quickly and safely do my own manicure without leaving home.”