Origami angel for preschool children. Modular Origami Christmas Angel

Christmas angel from paper will bring calm and comfort to your home, create a festive mood. After all, Christmas is one of the most important holidays, it is associated primarily with the Christmas tree, making wishes and giving gifts to their loved ones.
I suggest you dIY do-it-yourself paper workshop.

Modular origami angel Consists of: 1124 white, 222 beige, 84 blue. Also for hair you need yellow paper 1 sheet A4. The size of the triangular modules is 1/32 of the A4 sheet. The height of the angel came out 20 cm.

1. Angel dress The dress consists of 696 white and 80 blue modules.

1-2 rows, collect 14 white modules in each row, close in a ring.

3.4 rows - increase the number of modules to 18 in a row.

5,6,7 rows again increase to 22 modules in a row. 22 modules in a row.

8,9,10,11,12,13,14,15 rows increase to 26 triangular modules. Each row has 26 modules.

The 16th row is increased to 30 origami modules.
17,18,19,20 rows increase the number of modules by 2 modules. Each row has 32 modules.

21,22,23,24 rows increase to 40 modules in each row.

24 row alternate modules 4 white 1 blue and so the whole row. A total of 32 white and 8 blue modules.

The 25th row alternate 3 white 2 blue, a total of 24 white and 16 blue in a row.

The 26th row now in each of the 8 fragments will turn out 1 blue 2 white 1 blue - 16 modules of each color.

27th row - continue to reduce the number of modules in each fragment, until you complete each of them with a blue module (see photo below).

2. Angel hands
For each hand you will need 38 white, 2 blue and 1 beige module.
Gather your hands alternating 3 white - 2 white - so 8 times, then insert 2 blue modules and 1 beige in them. Give your hands a curved shape.

3. Angel wings
On wings you will need 352 white triangular modules.
In the 1st row there are 4 modules,
in the 2nd row - 5,
in the 3rd - 6 modules,
in the 4th row there are 7 modules.
in the 5th row - 8 modules
6th row of 9 modules.
7th row - 10 modules.
Collect 2 of these blanks.

8th row. Combine the two parts together. In a row there are 21 triangular modules.

9th row - we decrease by 1 module - only 20 white. So alternate another 7 rows (20 module - 21 modules) including the 9th.

The 16th row begins to divide our wings in half. From each edge, 9 modules - a total of 18 in a row.

Assemble each part to the end, decreasing with each row 1 module in a row, until 1 module is left.

4. Angel head
The head consists of 220 beige modules.

1,2 rows of 12 modules in a row, close in a ring.

3.4 rows increase to 14 modules in each row

5.6 rows again increase to 16 modules in a row

7,8,9,10 rows - increase the number of modules to 18 modules in each row.

11,12 rows - 16 modules in a row. We begin to reduce the number of modules in the reverse order, that is, by 2 modules every 2 rows.

13.14 rows - 14 modules in a row.

15.16 rows - 12 modules in a row. The head is ready.

Until the head is attached to the body, you need to add hair. For this we need 1 sheet of yellow A4 color. Cut pieces 2 x 5 cm in size and each of them cut into 5 parts without cutting to the end so that it was convenient to glue. Wait until the glue hardens well, you can twist the hair with the tip of scissors making curls.

Decoration of the interior on the eve of Christmas with garlands of paper angels or individual figures, helps to create a festive atmosphere in the house. Such crafts are easy to do with the children or yourself, dedicating this evening. All that is needed for work is paper, scissors, glue and a little imagination.

Angel is one of the symbols of the Christmas holidays. It is customary to decorate the house with his figures on the eve of the holiday.

Crafts paper angels, photo 5 options

Paper is the most affordable material, and it will be easiest to make angel figures from it. It can be flat or voluminous angels made in different techniques.

You can make them using:

napkins;
standard writing paper;
craft paper - colored, velvet or embossed;
cardboard;
blanks for quilling.

How to make an angel out of paper master class

To make an angel figurine out of paper, as in the photo below, you need:

cut a circle of thick paper using scissors with curly blades;
cut it into 3 segments, so that one has the shape of an isosceles triangle, and the other has the shape of a wing;
stick wing parts to the triangle;
cut a small circle from flesh-colored paper and stick it on the top of the triangle. Angel is ready.

Another option is the angel can be glued from colored paper. For this, it is necessary to prepare parts similar to those presented in the figure below.

It’s even easier to make an angel by printing out the template below. Transfer it to cardboard, cut it out. By making notches along the lines located on the back of the figure and on the wings. Fasten the wings on the back of the angel.

You can make a cute garland yourself from paper angel figurines by cutting them in sufficient quantities according to patterns and stringing them on a string.

Another version of the garland that does not require stringing. It is enough to fold the paper with an accordion and transfer the drawing from the template onto it. Cut and stretch the garland.

How to make a charming envelope in the shape of an angel, demonstrates the video below.

Angels from paper patterns for cutting, print and cut photo 5 options

The process of making angels will become even easier if you use ready-made templates. To do this, they need to be printed on a printer using colored, embossed or plain white paper, and then cut along the contour. You can decorate a window or wall with individual figures, use them to create postcards and garlands.

DIY angel wings, step by step with a photo

Wings are an invariable attribute of an angel costume used for children's matinees, school performances, New Year's masquerades, as well as photo shoots. You can make them yourself by making a wire frame and wrapping it in white cloth or cutting out a template from cardboard and pasting it with paper.
For wings you will need:

wire or 2 wire clothes hangers;
a pair of white stockings or tights;
white feathers of various lengths;
hot glue;
pliers;
wide elastic.

The manufacturing process is not complicated and does not take much time

Make a base for angel wings using wire or wall hangers. To do this, it is necessary to bend them with pliers, giving the desired shape. Fasten both halves of the wings together.
Pull the stockings onto the wire form and secure them. Instead of stocking, you can use a thin cloth.
Using hot glue, fix the feathers, placing them in rows, and going from the bottom up. For the bottom row, use the longest feathers, then go up to use smaller feathers.
Sew the fixing straps of the required size to the inside of the wings using a wide elastic band.

The diagram below for the phased production of wings for an angel will serve as a hint and help you orient yourself.

In the absence of real feathers, for the manufacture of angel wings, you can use strips cut in the form of feathers from paper or white fabric, as shown in the photo below. If the feathers of the wings are cut out of fabric, they can not be glued, but sew manually by stitches to the base.

If the wings of an angel are part. children's costume, they can not be pasted over with feathers, but can be decorated with beads and patterns made with paint or decorative glue.

Another variant of wings for an angel can be made using a cardboard blank as a base, on which pre-cut paper feathers are glued on top.

Origami paper angels, detailed instructions with photo

Origami - the art of folding various shapes from paper. The photo below demonstrates the possibilities of creating angels using this technique.

To lay down an angel figurine yourself in the origami technique, you can use the following scheme.

To create such an angel, you need to take a square sheet of paper and fold it diagonally - you get an isosceles triangle. This triangle is bent again diagonally, and then deploy the last fold. The fold line seen on the part indicates the center line of the triangle.

Bend the corners of the triangle to the center, forming a square.

Flip a square part, bent corners down. Using a pen, draw points at the upper corner so that they are located between the edge and the center line.

Bend the right corner, directing the edge to the intended point and freeing the previously bent triangle.

Return the triangle to its original position and repeat the operation, but with the left corner.

Make a crease by pulling the corner of the right triangle so that the left edge of the warehouse lies directly on the center line. Repeat the same on the left side.

Bend the right triangle so that its lower edge lies on the center line. Repeat the same on the left side.

Bend the formed side corners, directing to the center, but not reaching it by 0.5 cm.

Bend the right corner and bend the side triangle inward. Do the same on the left side.

Turn the workpiece over and bend the upper right part so that the fold line runs from its top to the edge. Then just the same left. It turns out that their free edges overlap.

Bend the corners of the overlapping parts, aligning the bend in the center line.

Taking the paper craft in your hands, bend the edges of the wings on both sides.

Turn the workpiece over and bend the bottom triangles inward.

Put the workpiece on the table, turn the wings up and bend, directing the lower parts of the wings towards the center.

Lower the wings down. Turn the workpiece over. stretch the folds at the top of the workpiece, forming an angel hood.

Use your fingers to give volume to the figure, spread your wings. The figure of an angel is ready.

Using the origami folding scheme presented below, you can independently make another original angel figure.

In the video below, you can see an origami angel.

Angels from paper stencils for cutting, print, 5 options

Using the stencils below, you can easily make a variety of angel figures. To do this, stencils can be transferred to paper or immediately print them in the right amount, and then cut along the contour. Such figures are a great decor that can be used to decorate windows, create postcards and panels.

Angels from colored paper, step by step with photo

Quickly and easily make a stylized angel figure, similar to the one shown in the photo below.

To do this, you need a sheet of colored paper, glue, a pencil, a ruler and scissors.

Using a ruler and a pencil, draw on a sheet 2 squares 12 × 12 cm in size and 2 strips of length equal to the length of the sheet and a width of 0.5 cm each. Cut them with scissors. These are the details of which the angel will be made. Bend each square in the form of an accordion with a step width of 0.5 cm.

Put both harmonica squares together. Stepping back from the edge by to cm, bend both parts, outlining thereby separating the wings from the angel skirt.

Putting one of the parts aside, the remaining edge glue together the inner edge of the wing and skirts. Repeat the same operation on the second part.

The next stage is the manufacture of the head of an angel. To do this, turn one of the thin strips into a spiral, periodically covering the strip with glue. When it is completely twisted into a spiral, take the next one and glue it to the edge of the previous one, continue twisting the spiral. When a segment of a strip 10-12 cm long remains uncoiled, make a loop 2-3 in height, as seen in the photo below, and fix it by gluing the rest of the strip to a twisted spiral so that there remains a free tip about 5 cm long. as the glue dries, spread the skirt and wings of an angel. The figurine is ready.

To make a voluminous figure of an angel with your own hands, you will need:

2 round napkins with delicate edges;
1 large round bead;
1 smaller bead;
the remains of white threads;
glue;
scissors;
needle.

Take 1 napkin and glue the cone out of it. To do this, cut a small segment near the napkin, measure out the allowance for gluing along one of the edges, bend it. At the part of the part reserved for the allowance, cut off the tip as shown in the photo below. Apply glue to the stock, roll the part into a fist and glue it.

Cut the second napkin into 4 segments - 2 parts of wings + 2 parts of handles. To make the handles of an angel, it is necessary to turn each of the segments into a cone, glue them along the edge. Then sew them to the top of the large cone.
For segments reserved for wing parts, cut off the tops.
From a large bead to make the head of an angel. To do this, string a bead on a wooden skewer, paint it with gouache or white acrylic paint.

Cut the threads into equal lengths, fix the knots at the ends.
Thread a small bead. Pull the thread through the top of the cone, string a large bead-head. Fix the bundle of hair-hair, again passing the needle through the hole in the bead-head, the top of the cone and a small bead. Tighten the thread, securely fixing all the parts, fix it by tying the ends in a knot, cut off the excess.
Glue the wings.
Attach an eyelet to the head of the angel. The angel figurine is ready.

You can make three-dimensional figures of angels by printing, coloring, cutting and gluing ready-made templates.

Do-it-yourself-made voluminous paper figures of angels can be used to create thematic compositions, like decor when laying the table or as Christmas-tree decorations if you attach loops to them.

How to make a three-dimensional paper figure, shows the video below.

Origami, an angel made of paper is one of many figurines that can easily be made with your own hands using ancient techniques. The original figure can be made in different versions. There are several schemes according to which you can make different types of figures from an ordinary sheet of square paper in just a few minutes.

Origami - the art of folding various shapes and images of objects from plain paper. It came to us from ancient China. Such figures were created without scissors and glue and were an attribute of ceremonies of a religious nature. In the modern world, this type of art has lost its direct destiny and is, although very popular, but a hobby that is loved by both children and adults.

If you approach the art of origami professionally, you will need desire, perseverance, patience, attentiveness and, naturally, a square paper sheet.

Instruction manual origami paper angel

First, take a square of paper. White is best for an angel figure. The sheet must be folded diagonally so that the result is a triangle. If initially the sheet was rectangular, then the excess must be cut off.

The triangle that turned out needs to be folded in half, in order to determine the middle. Thus, we plot the height of our triangle.

We unfold the triangle once again and lay it on the surface so that the angle is turned in our direction. We fold the right corner down to the height (the line that we marked before). In the same way, we add the second, left corner.

We turn the resulting workpiece. Then divide the upper corner of the workpiece into three parts. First, add the right side to the middle, then the left side.

The two triangles resulting from previous actions are divided in half. First top, then bottom.

Every angel has wings. Therefore, out of creation is a necessary step in the work. On the back side of the product (right and left), we carefully unfold them so that our angel does not break.

To make our paper wings look as real as possible, their corners need to be lifted up on both sides. Then we make bends parallel to the center line, on the right side and on the left.

According to the formed bends, it is necessary to turn the corners on both sides inward. We got wings that we lower down.

We turn our angel on the other side and form a hood. To do this, bend the sides from two sides to the end. In a random order we give shape to our wings with the help of several bends.

The upper corner must be divided into two halves, the same must be done with the lower corner. We shape our hood by twisting the corner inward.

To give shape to the robe of an angel, we bend the corners into the inside of the figure.

On the diagram origami paper angel (see below) each action is shown in detail.

Having acquired some skills and having filled your hand, you can make an angel figurine in different versions, as in the photos below.

Such figures will be a wonderful decoration for the New Year holidays.

Master class Craft product Christmas Origami Chinese modular Christmas Angel Paper

Modular origami angel consists of triangular origami modules: 1124 white, 222 beige, 84 blue. Also for angel hair you need yellow paper 1 sheet A4. The size of the triangular modules is 1/32 of the A4 sheet. The height of the angel came out 20 cm.

1. Angel Dress The dress consists of 696 white and 80 blue modules. 1-2 rows, collect 14 white modules in each row, close in a ring.

3.4 rows - increase the number of modules to 18 in a row.

5,6,7 rows again increase to 22 modules in a row. 22 modules in a row.

8,9,10,11,12,13,14,15 rows increase to 26 triangular modules. Each row has 26 modules.

The 16th row is increased to 30 origami modules. 17,18,19,20 rows increase the number of modules by 2 modules. Each row has 32 modules.

21,22,23,24 rows increase to 40 modules in each row.

24 row alternate modules 4 white 1 blue and so the whole row. A total of 32 white and 8 blue modules.

The 25th row alternate 3 white 2 blue, a total of 24 white and 16 blue in a row.

The 26th row now in each of the 8 fragments will turn out 1 blue 2 white 1 blue - 16 modules of each color.

27th row - continue to reduce the number of modules in each fragment, until you complete each of them with a blue module (see photo below).

2. Hands of an angel For each hand you will need 38 white, 2 blue and 1 beige module. Gather your hands alternating 3 white - 2 white - so 8 times, then insert 2 blue modules and 1 beige in them. Give your hands a curved shape.

3. Angel Wings On wings you will need 352 white triangular modules. There are 4 modules in the 1st row, 5 in the 2nd row, 6 modules in the 3rd, and 7 modules in the 4th row. in the 5th row - 8 modules; 6th row of 9 modules. 7th row - 10 modules. Collect 2 of these blanks.

8th row. Combine the two parts together. In a row there are 21 triangular modules.

9th row - we decrease by 1 module - only 20 white. So alternate another 7 rows (20 module - 21 modules) including the 9th.

The 16th row begins to divide our wings in half. From each edge, 9 modules - a total of 18 in a row.

Assemble each part to the end, decreasing with each row 1 module in a row, until 1 module is left.

4. Angel Head The head consists of 220 beige modules.

1,2 rows of 12 modules in a row, close in a ring.

3.4 rows increase to 14 modules in each row

5.6 rows again increase to 16 modules in a row

7,8,9,10 rows - increase the number of modules to 18 modules in each row.

11,12 rows - 16 modules in a row. We begin to reduce the number of modules in the reverse order, that is, by 2 modules every 2 rows.

13.14 rows - 14 modules in a row.

15.16 rows - 12 modules in a row. The head is ready.

Until the head is attached to the body, you need to add hair. For this we need 1 sheet of yellow A4 color. Cut pieces 2 × 5 cm in size and each of them cut into 5 parts without cutting to the end so that it was convenient to glue. Wait until the glue hardens well, you can twist the hair with the tip of scissors making curls.

Now we will collect all the details together. We will need glue

Having approximately tried on my head, I immediately glued the wings, then the head with hair, eyes and mouth, and at the very end glued my hands. Before glue the wings, give them the necessary bends, as if I bent each of the parts inwards - they look like real ones.

He decorated the little girl with a rain from the Christmas tree, on the neck he hid the place of the junction of the head and body. You can use beads.

Each of us hopes that he is invisibly accompanied by a guardian angel, saving us from mistakes and saving us from misfortunes. You can create an entire angelic company with your own hands. Let them fly under the ceiling, hang among Christmas tree decorations and help us live. An origami angel cannot cope with our problems.

Flying origami angel

In order to make such a patron, you only need a piece of white paper, scissors and a template that you can print from the submitted photos. Increase its arched size and get to work.

Your first defender is a fair-haired girl in a Russian color sundress. Cut it into a stencil, decorate it or entrust it to your child, brother, sister. Cut the indicated places for the hands and poke a hole in the halo for the thread. Fold the sundress cone, crossing the wings along the cuts. You can fix the connection with a piece of tape on the inside of the cone. Put your hands in the slots, tie a thread to the halo and hang the craft on the Christmas tree.

The second origami angel is also a girl in an airy wide dress. Please note that only solid lines need to be cut. The dotted line shows the fold of paper. And you need to bend the details of the wings, skirts and stars to give them volume. Thread the thread through the halo and hang the angel with the stars.

According to the third template, a trumpeting angel can be cut out of white paper. Fold a piece of paper in half and cut the blank. Expand, throw his hands forward, bending the pipe as shown in the photo, fold it again and spread your wings.

Craft from the "accordions"

You will need:

rectangular sheets of white paper - 2 pcs.;
glue;
scissors;
felt-tip pen;
long thick paper tape;
tinsel or dry silver paint.

Work order

This craft consists of three modules. Take two rectangular sheets of paper and fold them into two "harmonica": one will, the other across.

Smear the edges of the paper with clerical glue and sprinkle these places with chopped tinsel or silver powder. Let the glue dry.

Fold a long accordion in half and cut a small hole in the center.

Take a long narrow paper tape made of thick paper or cardboard, fold it in half, forming a ring at the fold. Glue the circle-face, having previously drawn eyes and mouth on it. Lubricate the halo with glue and sprinkle with tinsel.

Insert a long "accordion" into the hole, which will be a glued strip with your hands.

Glue the second accordion-skirt to the strip.

Tie a thread and hang an angel on a Christmas tree.

Difficult but interesting

In this video, the assembly diagram is very intelligibly described and it is shown clearly how to make an angel with wings and a hood from a piece of paper of a volumetric origami. I advise you to take a larger leaflet for the first craft, since in this work there are a lot of small details.

Modular design

The module connection diagram is just as long and difficult to describe in words. It will be simpler and more understandable if you watch a good video clip with a master class on making an angel from modules. However, this figure is no different from a simple snowman. Their only difference is the halo and wings. Here is a diagram of the assembly of wings from modules.

The main Christmas symbol is considered an angel. Many people believe that the Christmas angel brings good luck, happiness and protects from troubles.

Today we offer you to please your family and friends and on the eve of Christmas to make them a wonderful gift - an angel made of paper! Origami Christmas angel not only decorates the interior, but also protects from adversity.

Prepare for the most magical winter holiday - Christmas people start in advance. Since Christmas is primarily considered a family holiday, they celebrate it most often with the closest and dearest people.

Christmas gifts are often made with their own hands. After all, there is nothing more valuable than the craft made by caring loving hands.

Today we want to tell you in detail about how to assemble an angel from ordinary triangular modules according to the description in a simple origami scheme.

A modular origami angel will require stocking up (the size of the angel is 20 cm):
Modules: white - 1124 pcs., Beige - 222 pcs., Blue - 84 pcs.;
A4 sheet of yellow color;
Scissors;
Drawn eyes, mouth;
Garland for decoration.

To learn how to make triangular modules, beginner origamists can watch a short instructional video. This video shows the technique of creating a triangular module in stages. By carefully watching this video, you can easily make the number of modules you need.

Video tutorial on folding triangular modules

Step-by-step photo instructions for creating an angel

Having prepared everything you need for work, you can begin to study step-by-step instructions:

Take 80 modules in blue and 969 in white. From them you will need to form an angel dress.
First, circle around 14 white blanks. Then, on top of them, “put on” the next level, consisting of the same number of triangles:
In the next two rows, increase the number of triangular modules by 4 pcs.
Rows 5 through 7 will consist of 22 triangles:
In circles from 8 to 15, the number of modular blanks "grows" to 26 pcs.
16 rows are made of 30 parts.
In the next 4 rows, the number of modules will be 32 pieces:
Each of the next 4 circles should be made of 40 parts.
Starting from the 24th row, it is necessary to alternate the colors: white blanks - 4 pcs., Blue - 1 pc.:
Next, alternate 3 white and 2 blue details.
At this stage, the master class circle should be divided into 8 fragments. In one fragment there should be 16 parts: dark blue, 2 snow-white, dark blue.
Then the number of origami modules is reduced until 1 piece is left in the fragments:
Turning over the folded part of the figure, you will see that you have obtained an angel dress:
Now you can start forming the handles of the Christmas angel. For one pen you will need 1 beige, 2 blue and 38 little white details.
Assembly diagram of a modular handle:
We alternate snow-white origami blanks 8 times: 3 and 2 pcs;
We insert 2 blue ones, and in them 1 bodily;
We give the handles a slightly curved shape:
Further, following the instructions, we perform snow-white wings of an angel:
We collect the parts step by step in rows: 4 pcs; 1 more; 6 pcs; +1 add 1 more; 9 pcs; 10 pieces.
In total, you will need 2 such blanks formed according to the same pattern.
They will need to be combined, forming a row of 21 triangles:
Next, we “draw” a modular line of 20 parts.
7 times we alternate from 20 to 21 pcs.:
We share the wings of a Christmas origami angel. On each side, add 9 triangles:
Gradually reducing the number of modules, fold the wings until there is 1 triangle on each:
At the next stage, MK proceed to the creation of the head of an angel. Its formation will require 220 beige triangles.
Connect the triangular patterns in rows so that an oval forms:
12 pcs. in the first two.
In the following 2 to 16.
From 7 to 10 - 18:
Then in two - 16 each:
Then every 2 rows we subtract 2 triangles. The result should be the same head as in the photo:
To make an origami angel beautiful, we decorate his head with hair. Origami beginners can make them out of yellow paper. For this part of origami, you will need the same fringe as in the photo: If you do not like the idea of \u200b\u200bfringe instead of hair, you can replace it with fine rain or cotton wool.
After gluing the hairs to the head, set it aside for a while.
Attach the wings to the dress while the glue is drying:
To make them look more realistic, give them the desired shape in advance.
Gently curl paper hair with scissors and glue the head to the body.
Decorate the neck and head of an angel with an origami garland or rain:
Glue eyes and mouth to the head: