An original painting made from twine with your own hands. Crafts from twine: a step-by-step master class for making useful and beautiful products (95 photos) Spheres and hemispheres

The “Jute Filigree” technique involves creating light and elegant crafts from twine or thick cord. The techniques of filigree jewelry technology came to this art from weaving twisted wire.

Jute filigree involves creating light and elegant crafts from twine or thick thread

Working with natural thread is so pleasant that it immediately attracts young and beginning needlewomen. Simple tricks and a simple algorithm of actions allow you to quickly master this magnificent ancient technique.

Before starting the creative process, you need to stock up on simple and accessible materials:

twine or any thick thread;
transparent glue “Moment” or “Titanium”;
PVA glue for processing;
scissors;
tweezers;
acrylic paints or acrylic varnish.

Stencils serve as the basis for filigree work. You can draw them using your own imagination or print them from the Internet. The sketch should be drawn with clear black lines on white A4 paper and placed in a transparent file.

The oilcloth will serve as the base on which all the parts will be glued. After processing and drying, the openwork craft is easily separated from the oilcloth base.

To make a simple napkin made of jute, you need to draw two templates: a circle with a diameter of 5-6 cm and the outlines of the future craft.

The work begins with twisting the snail. A small loop is created and new circles are wrapped around it. A small amount of glue is squeezed onto the template, and the folded circle is placed on the file.

Important! To complete the work, the jute thread is always cut diagonally with scissors.

The tip is carefully glued and merges with the overall workpiece.

The next step is making an openwork base. Glue is applied along all the contours of the template and threads of the required length are placed. It is convenient to work with narrow tweezers or fingers. To keep your hands always clean, it is advisable to use wet wipes!

When all the threads along the external and internal contours are glued, you can proceed to the production of fastening “snails”.

These small circles of threads folded in a circle will connect the openwork details of the napkin. Ready craft should be thoroughly coated with a solution of PVA glue and water (1 to 1).

After the blanks have completely dried, they need to be separated from the file and glued together.

If desired, the needlewoman can paint the napkin with acrylic paints. Gold or silver colors are ideal.

Patterns for making openwork napkins and there are a great many cup holders. The main thing is to approach creative process with soul and irrepressible imagination.

Gallery: jute filigree (25 photos)

Jute filigree made from twine: master class and miracle craft lessons from masters on making an openwork vase

The art of jute filigree attracts not only young needlewomen, but also young guys with a creative streak. A master class on making an elegant dish from twine is presented by a novice master from Belgorod region Vladislav Trush.

For his work, he uses a glass base vase and cling film, onto which he will apply elegant openwork patterns.

The base dish is covered with a transparent film, generously smeared with glue in the center, and the placement of the thread begins with a traditional snail. For convenience, the master holds the workpiece with sharp scissors and uses them to cut off the oblique ends.

The next step is to form “droplets” around the central circle. The master cuts 10-12 threads of the same length from the ball and places neat petals on the glue.

In the same way, the inner droplets are laid out in a circle, and the pattern turns out to be more saturated and rich.

To secure the structure along the entire circumference of the workpiece, 3-4 rows of jute thread are placed on the glue.

The next stage of work is the formation of the second circle of petals. The master decided that they would have an inclined, broken shape and consist of 3 decreasing droplets.

In the empty spaces between the curls, the young craftsman places small snails that will serve a fastening and decorative function.

The master carefully coats the finished work with PVA glue diluted in water. Let it dry completely, carefully remove cling film and excess glue, and then decorate it with golden acrylic paint.

An elegant vase for strawberries is ready! A young novice craftsman can make a magnificent gift for March 8th with his own hands for his mother or for his girlfriend.

Jute filigree made from threads, twine or ropes: step-by-step instructions for making a napkin holder

The art of jute filigree is based on the arrangement of natural threads in snails, drops and curls. They can be fixed to the surface with glue, then separated from it or remain in the form of decorative elements on the original base.

New patterns for work are offered by an experienced needlewoman with experience. Based on her stencils, you can make an original openwork napkin holder.

The art of jute filigree is based on the arrangement of natural threads in snails, droplets and curls.

In their work, craftswomen use glass pebbles, rhinestones and twine thread. different colors.

To make a napkin holder in the shape of a chestnut leaf, you will need skeins of gray-green and emerald shades, as well as brown pebbles for the legs and the central “nut”.

According to the prepared pattern placed in the file, the needlewoman lays out the threads, generously lubricating the base with transparent glue.

The inner veins of the leaf are made with gray-green thread, and the contours are beautifully decorated with bright emerald twine.

On a note! Jute of any color is available for sale, but the craftsman can always change the shade of the thread to his liking. To do this, it is advisable to paint it before starting work, completely dipping it in high-quality acrylic paint.

All leaves of the back wall of the napkin holder are made according to the same pattern; at the base they are fastened with circles on both sides of the workpiece.

The next step is making the front wall of the napkin holder. The part is made according to a small pattern with a central pebble placed on a round base.

To connect the walls of the napkin holder, you will need a reliable base. Serve them wooden blank of 4 sticks, wrapped in jute thread.

2 openwork parts and 4 small legs are securely attached to the dense base. It makes a great napkin holder for festive family feasts.

How to make a box using jute filigree? Photo of the wonderful work of an experienced master Sergei Shevchenko

Jute filigree is made up of simple patterns in the form of the letters “C” and “S”, as well as filling in empty spaces with the help of snails and eights.

To make a rope box you will need: a base box, oilcloth, jute twine, glue and a good creative mood.

The progress of painstaking jewelry work in the following stages of the creative process:

Prepared stencils are glued to the base cardboard box, and all sides are covered with a protective film.

Using liquid glue, beautiful curls, circles and contour entanglements are secured. When all the blanks are dry, they can be separated from the base and, if desired, painted with acrylic paint.

The bottom of the box is formed by laying the thread along the sides of the square. The twine is immediately placed on the glue, wrapped in one direction until the entire space from the corners to the center is filled.

For beauty and density, the bottom can be reinforced with circles and connecting rays.

In addition to the decor, the master decided to line the box with soft red velvet details, added pearls and white rhinestones. And I used small door hinges as a fastening mechanism.

The result exceeded all expectations! The result is a magnificent box that will be a gorgeous present for your beloved wife’s birthday.

Making an original gift: butterfly using jute filigree technique

In your eternal search for gift ideas, you can stop at making beautiful butterflies using jute filigree technique. For such a presentation you will need a minimum of material and 30-40 minutes of free time.

In your eternal search for gift ideas, you can stop at making beautiful butterflies using jute filigree technique

To make the butterfly bright, it is advisable to use threads of different colors and add beads and glass pebbles as decoration.
It is necessary to apply liquid transparent glue to the finished template, placed in a file, and carefully lay out the flexible strands of twine.
Where the sketch lines are thick, you will have to glue 3-4 short strips of jute.
The color scheme of the butterfly is chosen according to the taste of the needlewoman.

The black dots in the diagram are decorated with small twisted snails; in addition, they can be decorated with pebbles or flat beads.

The insect's body is formed by oval bases onto which large brown rhinestones are glued. After treatment with PVA glue and complete drying, the craft can be easily separated from the oilcloth base.

Bright butterflies can serve independently decorative decoration or placed on any fabric, wood or metal base.

Feather of the Firebird: a lucky talisman made of jute thread

Skillful home needlewomen are real dreamers and inventors. From ordinary twine they can make beautiful talismans for good luck and happiness.

A simple example is the Firebird's feather. To create it you will need a small roll of twine, some clear glue and a couple of beautiful pebbles.

First, as always, you need to make a sketch and place it in a transparent file. Apply glue in a thin stream along the contour of the design and carefully lay the jute thread, cutting off the oblique ends.

To place a glass pebble in the center of the feather, you need to make a base for it - a round snail from working thread.

It is advisable to additionally lubricate the ends of the natural thread with glue, then they will not fray and will be neatly hidden in the work.

Those curves in the picture that will be decorated with rhinestones need to be reinforced with 2-3 strips of jute.

The finished work must be thoroughly coated with diluted PVA glue and set aside for 1-2 hours.

On a note! When the craft is completely dry, it must be separated from the base, remove excess glue with a hot soldering iron, a heated screwdriver, or simply cut with scissors.

An original talisman in the form of a Firebird feather can be used to decorate a coffee table, a mirror in the hallway, a kitchen cabinet or a wall above the bed.

Jute filigree is a simple and fascinating technique; you can download patterns and pictures on the Internet for free. It does not require special knowledge or special schemes. You can even use children's coloring books as templates for making original crafts. After mastering the simplest patterns in practice, you can easily move on to creating complex paintings in openwork filigree technique.

Dish or tray using jute filigree technique: master class (video)

Jute filigree: napkin for a glass (video)(Galina

Tell me, how can I remove glue residue from the product?

Good day!

Greetings to all handicraftsmen, creative people, as well as those who are interested in handmade crafts.

How can you decorate the walls of your home? That's right, there are a lot of ways, and one of them is a wall panel. This is exactly the type of panel we will be making today. This work is not difficult to do, and you will probably want to make yourself such beauty.

What you will need for work:

Corrugated cardboard;
Linen fabric or burlap;
Lace braid;
Jute twine;
Jute rope;
Paper napkin for decoupage;
A piece of paper or nylon wallpaper;
Scissors;
Polymer glue;
Hot glue;
Acrylic paint and varnish.

Step 1.

Cut from corrugated cardboard 3-4 circles and glue them together. This part will be the basis for the craft, so decide on the size right away.

Step 2.

From burlap or linen fabric cut out a few pieces bigger size than cardboard circles, and glue the fabric with polymer glue to one of the sides of the cardboard.

Step 3.

We cut the fabric in a circle with a small allowance, cut the allowance into several strips and hot glue these strips to the welt and the back of the cardboard base.

Step 4.

On the front of the fabric, in the center, draw a circle and paint it with acrylic paint. The color of the paint will depend on the dominant color of the design on the decoupage napkin. Drying the paint.

Step 5.

After the paint has dried, use hot glue to glue the lace braid around the perimeter of the base for the panel.

Step 6.

Using a simple pencil, in the space between the painted circle in the center and the braid, we sketch the future pattern that we will make from jute twine.

Step 7

Apply a small amount of hot glue to the lines of the drawn pattern, and gradually glue the twine to them.

Step 8

Now, you need to tear off a piece of the design from a decoupage napkin of such a size that it covers the painted part in the center of the panel, and then glue it to the paint using acrylic varnish, using the decoupage technique. We wait for the varnish to dry.

Step 9

Using hot glue, glue the jute rope along the contour of the painted circle in the center of the panel.

Step 10

Now, you need to glue a hanging loop to the back of the craft, and then seal the entire back surface with a piece of wallpaper, fabric or just paper, passing the loop out through the slot. We cut off the excess material sticking out around the perimeter of the circle with scissors.

Step 11

Finally, you can lightly paint the twine patterns and rope in the center of the panel with acrylic paint. Additionally, you can also apply a little pearlescent paint to the white paint.

As you can see, it’s not very difficult to create amazing things with your own hands))).

Please don't forget to share our articles on in social networks! Creative success to you, goodness, peace and all the best!

Twine, previously used only at the post office and only for production purposes, today, with due perseverance and patience, can become an excellent basis for practical and decorative crafts. This technique called jute filigree and does not require a large number of elements: just a skein of rope, scissors and glue.

Twine art is distinguished by its simplicity of execution: a master class on crafts made from twine does not take much time. Below you will find the most best ideas, which will be excellent training for beginning craftsmen, and inspiration for new creative ideas for more experienced craftsmen.

Vase from any container

A glass, tin jar, bottle, glass and any other container can easily become an aesthetic vase for flowers or storing small items if you properly wrap it with twine and decorate it with decorative elements. This is done like this:

Prepare necessary materials and tools: container, rope, glue and scissors.
Wash the jar, bottle or glass thoroughly and dry.
Treat with glue (in whole or in part).
Carefully, tightly and evenly wind the twine, starting from the bottom towards the neck.
Cut the thread without allowing it to unravel, coat it generously with glue and hide it discreetly.
Wait until completely dry.
Decorate the product with painting, applique, beads or flowers.

There are even more ideas on the website https://podelkimaster.ru, see photos of finished crafts

In a similar way, you can update any home or garden item: flower pot, cans of cereals, boxes, furniture elements. You can cover not the entire surface with twine, but stick strips, leaving gaps.

Small items basket

Ideas and methods for making crafts from twine do not end with just wrapping: with due diligence, you can make a full-fledged basket or box. To do this, you need to find a plastic container of the required size and shape, scissors, glue, a crochet hook and follow the plan:

Make slices at equal distances on top of the plastic container.
Wind the thread vertically through the notches.
Once completed, trim and seal.
Wrap the twine from the bottom in vertical lines, using a crochet hook if necessary.
Then the product is turned over and the bottom is fixed with glue.
Let dry and pull out the container.

Spheres and hemispheres

You can also come up with a purpose for “knitted” spheres, which are unusual containers or decorations. Perfect for beginners, but we make a similar craft from twine step by step like this:

Inflate the balloon.
We randomly wrap it with twine.
We cut the thread and fix it by threading it under the bottom thread.
Coat with glue, removing excess with a paper napkin.
Dry for a day.
We deflate the balloon and take it out.
Leave it whole or cut off the neck.

Souvenir in the form of a turtle

Beautiful new crafts made from twine are opened with toy souvenirs, for example, a turtle. It's done simply:

Draw the outline of the turtle or print out a suitable template from the Internet.
In accordance with it, we cut out a piece of foam rubber.
Glue both parts together.
We wrap the paws, head and tail with twine.
The upper cardboard part is coated with glue, onto which a thread is laid in circles, imitating a turtle shell.
We draw the eyes and decorate them.

Garland of acorns

An excellent decoration would be a garland of acorns made from twine, Kinder Surprise containers, wire and coffee beans.

Instructions on how to make a craft with your own hands are as follows:

Make the required number of acorns: take a container, glue the wire, coat it with glue and tie it with thread, from bottom to top, fix the grains like a cap.
Connect the acorns in clusters, which in turn are strung on a single wire or twine.
If desired, add to the composition “ oak leaves”, which are made from pieces of burlap, glued around the edges with twine.

Openwork flowers

Crafts made from twine can complement compositions made from third-party materials, and openwork flowers from among such decorations. Also, such curls, which have an unusual design and are light in weight, can become the basis for a pendant, earrings, or brooches.

Flowers are made according to the following algorithm:

The threads are cut into strips of equal length.
If necessary, the twine is painted with stain.
The strips are cut into segments of seven centimeters.
Each piece is leveled and one end is left curled.
Assemble a flower using wire with beads at the end as stamens.

There is another option: twist five circles of the same diameter in a tight spiral, place them on top of each other and secure with glue. Use a contrasting thread (white paper twine) to decorate the edges of each petal and mark the core.

Modest wreath

Twine wrapped hoop or square frame, decorated lush flowers or other decorations, can fit into any interior as an interesting wall composition. The craft is easy to do: the main thing is to wrap the frame tightly and avoid overlaps or the formation of voids.

The described ideas can be easily brought to life by receiving instead of boring twine original accessories, decor and gizmos that will decorate any interior or become an unusual gift. The filigree technique will not cause any difficulties, and the above photos of twine crafts will be a good start in the arts and crafts.