Pillow for rings for a wedding: a selection of unusual manufacturing techniques. Wedding pillow with a rose We make a delicate pillow for rings for a wedding using the kanzashi technique

A wedding is a responsible and serious event that requires you to carefully prepare and think through every detail. A ring pillow is just one of those for a wedding. And sewing it, it turns out, is not only easy, but even interesting.

Making a delicate pillow for rings for a wedding using the kanzashi technique

The kanzashi technique is the most popular for making such wonderful pillows. You will only need a little patience to be able to master this delicate art.

Materials: a piece of red fabric measuring 35x20 cm, threads, white mesh, cotton wool, glue gun, tweezers, knife, lighter, burgundy five-centimeter satin ribbon, as well as white and green with a width of 4 cm.

Step-by-step description of the work progress:

1) Sew the fabric on three sides. Fill with cotton wool, and not tightly, otherwise there is a risk that the rings will roll off the pad. Sew the last side.

2) Use a white ribbon, leaving clothespins 2 cm apart every 4 cm, to trim the edges. For convenience and greater strength, you can first fasten with pins, and then add stitches.

3) Make a figure eight from another piece of ribbon and sew it into the corner part. Glue the mesh into the remaining space.

4) Now the rose itself. To create it, cut a wide burgundy ribbon into 50 squares, 5 cm each.

5) Bend the square diagonally to form a triangle. Next, fold its edge so that the corner is in the center of the bottom. Do the same with the second one.

6) To get a rose petal, you need to cut the base, solder the layers and form something like this:

7) Twist the petal and make a bud from it. Next, glue the rest in a spiral so that they look evenly, and the middle does not stick out or fall out. And yet, the back side of the rose should be glued evenly and in the same plane.

8) Now it’s the turn of the leaves. Cut out pieces from the ribbon that are shaped like the original leaves on the rose. Afterwards you need to singe them and bend them with your fingers more often approximately every 2 cm. Thus, the leaves should become more voluminous.

9) Now you need to heat up the knife and make veins. Then glue the leaves and narrower ribbons to form a composition. Sew on a rose. Use your fingers to make a depression in the middle for future rings. Ready!

Let's make a version of the pillow in white colors with interesting accessories

Another option interesting accessory made with your own hands.

Make the pattern from two identical squares 10x10 cm plus 2 cm allowances. Fold the cut out elements and attach them along the edges to sewing machine except one, leaving a hole in it for stuffing with filler. Make cuts in the corners, turn them inside out using a wooden stick and straighten them.

Place filler inside, for example, cotton wool or padding polyester. And sew it up with a hidden stitch. The base is ready.

And also, so as not to take a new thread each time, after fixing the bead, insert the needle inside the pillow and bring it out at the place where the new one is fixed. For decoration, use roses and twigs made of satin or organza, which can be purchased ready-made or made using the above technique. Next, tie a bow from a satin ribbon, secure it with several stitches, and place a bead in the center. That's all!

We will make a pillow for presenting rings with the wedding date

A very elegant and useful calendar pad with your memorable day.

For production you will need:

Laser printer, A4 sheet, pins, two pieces of calico 17x17 cm and 23x32 cm, needles for embroidery and sewing, cotton lace 70 cm long, scissors, 70 cm of narrow satin ribbon, a simple pencil, red and white threads, chalk, 1 cm of glue web, tape measure, synthetic fluff.

Execution algorithm:

1. Build a blank. To do this, place a web between paper sheet and a piece of calico. Iron evenly.
2. Trim off excess fabric following the outline.
3. Print the required calendar page on the front side. In order not to wrinkle the material, you need to purchase a loose fabric on a natural basis.
4. Attach the completed blank to the second side of the pad and cut along the contour.
5. For reliability, it is better to iron it thoroughly again.
6. Pin lace around the perimeter of the product 2-3 cm from the edge and stitch it on a machine. And sew the remaining corner on the inner and outer sidewalls by hand.
7. Bend the lace on the front side inward and pin it with pins. Sew on a machine, stepping back 1–1.5 cm from the edge and leaving one side untouched for future filling.
8. Trim excess fabric, remove pins, insert padding.
9. Embroider a heart or circle around the desired date. All that remains is to manually sew up the remaining gap.

And for dessert, especially for you, a photo of another equally wonderful work:

Video lessons for beginners

Welcome to the section where you can learn something new from the experience of other masters in making wedding pillows. Good luck in your creativity and enjoy watching!

Many accessories are used for a wedding celebration. All of them are made in a certain style and color scheme. The ring cushion is also created from different materials, depending on the style and design. Handmade is always better appreciated and the items created will be unique.

Master class: DIY ring cushion

This master class shows how to make such a pad with your own hands using the kanzashi technique.

To work you will need:

• Squares of crepe-satin or satin of blue color 17x17 cm – 2 pcs.
• Pieces of lace 8.5x19 cm – 2 pcs.
• Blue satin ribbon 5 cm wide.
• White satin ribbon 2.5 cm wide.
• Blue satin ribbon 0.6 cm wide.
• Threads.
• Needle.
• Candle.
• Lighter.
• Brooch.
• Scissors.
• Sintepon.

Manufacturing process

• The edges of the two base squares are scorched over candles to prevent the fabric from fraying.
• One square is placed face up and two pieces of lace are placed on it white a little overlap. The lace is sewn with thread and fabric on the sides.
• A blue ribbon 5 cm wide is cut to a length of 19 cm and the edges are singed.
• A white ribbon 2.5 cm wide is cut to a length of 19 cm and the edges are singed.
• Sew with a thread and needle blue ribbon On the sides. The tape should be exactly in the middle. To do this, you can use a ruler or measuring tape for accuracy. Before sewing the second edge of the tape, it needs to be moved 0.5 cm towards the center of the pillow so that it bends by this distance. This is so that when stuffing the pillow with synthetic padding, the tapes do not pinch it.

• Place a white ribbon exactly in the middle on the blue ribbon and do the same as with the blue ribbon.
• Take the second square of fabric and place it face down on the first square. The edges of the base are stitched with thread. Reaching the places where the lace was sewn to the fabric, carefully open the fabric and pull out the temporary threads one by one. Hold the fabric with your hand so that everything remains in place.
• The pillow is stitched along the edges with an indentation of 0.5 cm. But 6 cm are left unstitched on one edge. This edge should not come into contact with the tape. After this, the basting is removed. Excess ribbon and lace are cut off and the edges are singed over the fire. Small cuts are made in the corners with scissors so that they turn out well.
• Turn the pillow inside out so that the lace and ribbons are right side up. Using the back of the brush, go over the back of the edges so that they are better defined.
• The pillow is stuffed with padding polyester. First the edges are filled, then the rest of the space.
• The hole in the side of the pillow is sewn with a blind stitch.

• The center of the pillow is tacked with a thread and a needle to create a pillow with a depression. The ribbons in the middle are slightly pulled together by a thread.
• A blue tape 0.6 cm wide is folded at an angle and glued in the middle. Apply glue and stick the tape to the pad.
• White tape 2.5 cm wide is cut into squares. Each square is stitched in the corners on all sides and the thread is pulled together to form a flower. The resulting flowers are used to decorate the pillow, sewing each flower to it.
• Attach the brooch.

You can make such an accessory in the shape of a heart. To do this, a blank of the appropriate shape is cut out. You can decorate it with ribbons, artificial flowers, beads and lace. A pillow-shaped hat looks good. It can be decorated with feathers and stones, rhinestones, ruffles and flowers.

This pillow can be crocheted. To do this, knit a warp of threads and stuff it with synthetic padding. You can decorate it with various knitted elements, using and combining several colors. A good color solution would be a combination of white and Provence color.

How to make a nest-shaped cushion for rings with your own hands

IN Lately It has become fashionable to use non-standard solutions. Numerous photos are full of new ideas. One of these is a DIY ring nest. It is popular and very easy to make.

To work you will need:

• Decorative ball made of twigs.
• Paper filler (artificial grass).
• Beads.
• Satin ribbon 0.5 cm wide.
• Scissors.
• Copper wire.
• Hot glue gun.

Manufacturing process

• The ball of twigs is shaped into a nest, moving the top part to the bottom. If some places cannot be pressed down, then they should be secured with copper wire.
• Take a piece of wire 1 m long and string beads on it. One end of the wire is secured to the base of the socket, and the other end is tucked in so that the beads do not fall apart. They begin to wrap the wire around the nest, threading its end in and back. You need to ensure that the beads evenly fill the surface.
• The nest is filled with filler.
• A bow is formed from the ribbon and attached with hot glue.

By using self made You can make the most unusual accessories for a wedding that will decorate this celebration and make it unforgettable.

Video on the topic of the article

Wedding accessories are charming details that create and complement the unified image of this most important celebration in life. The decor of the festive hall, glasses and cutlery, the design of the place where the ceremony itself takes place - all this should be designed in a single style that matches the thematic direction of the wedding. Of course, we shouldn’t forget about these pleasant little things, like a pillow for rings, because this detail is of particular importance in the wedding whirlwind. Thus, it is customary to photograph the rings of those getting married on a delicate and elegant pillow; in addition, it pleases the eye during the ceremony.

Carrying out rings on a beautiful pillow is rather a Western tradition, since in Russian registry offices newlyweds remove the symbols of their marriage ties from a special saucer, which is issued by an employee of the institution. This tradition is common in Slavic countries. Cushions are more suitable for outdoor ceremonies, which are common in the USA and Europe, which is where we got the idea to use special soft holders for wedding rings. Sometimes a child () can carry the rings on a pillow, adding an additional touch of tenderness to the ceremony.

Wedding pillows are now sold in all specialized salons. They can be made in the same spirit with the dress and details of the groom’s suit - this adds elegance and sophistication to the decor. Often a pillow is ordered from a handmade decor master or from special companies that produce Wedding accessories to order. This product is sewn mainly from expensive fabrics of all shades of white, less often - other colors. Brocade, satin ribbons, lace, natural silk, beaded jewelry, pearls and organza can be used. The accessory is decorated with embroidery, rhinestones, twigs, and fresh flowers.

Rings on the cushion are usually attached to a delicate bow or one of the satin ribbons, which creates a charming image that stands out in professional photographs. During registration, the couple or the registry office employee pulls the ribbon and the rings are carefully released. This small ritual makes the wedding even more touching.

Ring pad size

If the pad is made in the classic square version, its size should be no more than 15x15 cm. They do it more often 10×10 cm.

It is important not to exceed these dimensions so that the rings do not get lost in the decor and remain the main characters of this composition. Pads in the shape of a circle, heart, flower, etc. should be about the same size. Sometimes they make large pillows - almost the size of a sofa cushion, but they no longer look so tender and touching.

Cushion for wedding rings: design options

Pillows decorated with retro lace and artificial flowers look original. Some weddings use a stand in the shape of big flower gerberas or daisies, the core of which is a bed for rings.

If the wedding decor is far from the classic white and pink color range, since a Provencal, rustic or vintage style is chosen for the celebration, you can sew a pillow from thin burlap and decorate it with colored ribbons or lace. This is a very popular design today. The wedding date and the names of the newlyweds are often embroidered on such pillows, or even a calendar drawing is applied.

Wedding pillows for engagement rings can be given a variety of shapes: a heart, a flower, a bird’s nest, a shell, a basket with a handle, a flowerbed, etc. This product can be sewn in the form of a round Turkish “dumka” with drapery and a button in the center. In general, brides and grooms have a lot of imagination.

Here's another idea: place the ring cushion in a book with a “hiding place” cut out especially for it. A substantial volume is placed in front of the bride and groom. They open the cover - and there are rings. The book, of course, should be about love. How else?

By the way, the pad is not always accompanied by ties. Sometimes a notch is made in the center of the product to prevent the rings from rolling off. In this case, ties are optional. Another option is ribbon loops through which the ring is threaded. And one more solution - large beads as ring holders.

Lately, when the handmade fashion is gaining momentum, many brides are interested in the question. If you approach the matter with love and accuracy, the result will be no worse than that of a professional or experienced craftswoman. We present to your attention one of the options self-made cushions for rings.

DIY ring cushion: step-by-step master class with photos

In this master class we will sew a very simple wedding pillow for wedding rings. Making this accessory does not require much effort or expense. It can even be sewn by hand, rather than on a sewing machine.

We will need the following materials for sewing a wedding accessory:

• white satin fabric;
• white lace;
• white double-sided satin ribbon measuring 1x50 cm;
• white double-sided satin ribbon measuring 0.5x30 cm;
• pink satin ribbon measuring 0.5x30 cm;
• white threads;
• padding polyester;
• needle;
• scissors;
• pencil;
• cardboard;
• ruler;
• lighter or candle;
• pins with eyes.

We cut out a template measuring 10x10 cm from cardboard. Our pillow will ultimately be this size. Fold the fabric in half so that the front side is inside and draw the outline of the template with a pencil. We cut out the blank for the pad, making a 1 cm indent from the contour on all sides.

Remove the top layer of fabric. What remains is the bottom layer, which looks at us with its front side. It is necessary to prepare lace measuring 5x12 cm. You can cut blanks from very wide lace or guipure. The main thing is that one side is openwork. We place the lace on both sides close to the edges and fasten it to the fabric with pins. We deliberately leave some space in the middle to tie the pillow with ribbon.

We put back a layer of fabric on top and fasten all the edges along the seam allowances with pins. You can use a running stitch instead of pins.

We begin to sew two layers of fabric along the contour. If you sew by hand, use a stitch seam. In the process, gradually remove the pins so that they do not interfere.

Leave a distance of 5 cm between the beginning of the seam and its end, and tie a knot at the end.
We cut the corners obliquely, making indentations from the edge of 2-3 mm.

Turn the pillow blank inside out. We do this carefully so that the seam does not come apart.

Now you need to fill the pillow with padding polyester or some other filler. If it is padding polyester, then it needs to be torn into small pieces. Using a sharp object with a blunt end, we stuff the pad to evenly distribute the filler in the corners and not tear the seam.

After we have finished stuffing the pillow, sew the hole. All stitches should be the same size and very short so that the edge looks neat and is barely noticeable.

The pillow is ready. Now let’s decorate it with additional decor from satin bows. It is better to choose double-sided ribbons, as with them the product will look more elegant. Cut a white ribbon measuring 1x50 cm and singe the ends. We place it strictly along the center line, free from lace. The ends of the tape should be the same length on each side.

We tie the pad with ribbon and tie it with a simple knot. Now we cut a ribbon measuring 0.5x30 cm and tie the already tied knot of the previous ribbon twice. The ends should also be aligned along the same length and singed. Using this tape the rings will be attached.

Now we tie the wide ribbon into a beautiful bow.

Let's add some zest. Cut a pink ribbon 30 cm long and thread it through the top knot of the bow. The ends need to be singed and aligned to the same length. Tie the ribbon onto the bow again.

We get this DIY wedding pillow for rings.

Pre-wedding photo shoot Love Story

Wedding. How much of this word. The bride is gentle and sophisticated. Already in childhood we ask ourselves the question: how will my wedding go? I want the celebration to be held at a high level, so that only bright and good memories remain.

Preparation is a responsible matter. The celebration should take place in the same style. You must not miss a single detail. Wedding accessories play an important role. You will be offered many options for additions to your wedding, there are so many shops open. Don't forget about such an accessory as a cushion for rings.

The exchange of rings is the first gift of newlyweds to each other. The ring symbolizes infinity, it is a kind of symbol of eternal love and it is very important that there are only positive memories about this symbol. A wedding ring pillow will be a great help in this matter. Imagine: a few more minutes and the bride and groom will exchange rings and a new family will be born. The rings will be placed on a cushion or tray.

If you decide to buy an accessory in a store, they will provide you with a wide variety of models: round, square, with rhinestones, without rhinestones, with bright ribbons and made in a certain style. You can make a cushion for rings yourself, it’s not that difficult. A cute handmade wedding pillow will attract more approval from others. Will the purchased pillow be able to express individuality? Of course not. In the future, you will look at this accessory and remember how much time and effort you put into this product.

The main thing is to choose right size and the style in which the product will be made. The ring pad should be small so that the rings can be seen. You will need various decorative elements - beads, rhinestones, satin ribbons, stones, lace. Choose decor from any accessories store.

So you have decided for yourself that you will make the pillow yourself, now it’s time to decide what shape your ring pillow will be, what will decorate it and how it can differ from the others.

What types of pillows are there?

1) Pillow for rings - a heart. A cute bow will complement the pillow. You can choose any fabric, but satin and velvet in the color of the product are most suitable.

2) These can be products of various shapes: circle, square, oval or the same rectangle. Nice decorations will serve: lace, beads, ribbons, beads and pearls. You can embroider the first letters of the newlyweds' names.

3) Pillows with images of things and objects. This option can be chosen if the theme of your wedding matches the idea that you want to embody.

4) Product with your joint photo. To do this, you need to select a photo and print it. The photograph must be of a certain size and in color.

5) Pillows on which vows given to each other are embroidered. Vows can be written on different languages, in different fonts and colors.

6) Pillow for rings with the wedding date. Example: calendar and highlighted date.

7) Wedding pillows made from fresh flowers look very beautiful and cute. Wedding pillows for rings made of fresh flowers. Choose fresh flowers and the main thing is that you and your significant other are not allergic to this composition.

8)Themed pillows

- Trips. An example is the car ring pillow.

– Pillow in “Vintage” style. All kinds of brooches, ribbons and small beads will help you here. Looks elegant and sophisticated.

– Marine theme. The predominance of green, blue, light green colors.

– Eco pillows. Natural ingredients are an important component of such products.

– Your favorite book will be an original pillow for the rings. The main thing is to give the right meaning.

– Confirmation of the fact that beauty is in simplicity will be a pillow made in the Provence style.

– Unusual pads will delight the eye and surprise with their design.

You can see even more ring pads by watching this video.

If you have decided that making a cushion for rings with your own hands is not a problem for you, then we offer you a master class.

Master class on creating a cushion for rings with your own hands( With step by step photos)

You will need:

- Textile. Satin and velvet work best. Size approximately 30 by 25 cm.

– Satin ribbons: pink (30cm); 2 white ribbons (25 cm, 24 cm); green ribbon (all shades of green) 0.5 cm –1.5 cm; and white – 0.5 cm;

– Sintepon;

– Paper, pencil, scissors, needles.

- Beads. You can choose any color.

Let's see how to make a wedding ring pillow with your own hands

The first thing you will do is take paper and draw a sketch (for us it's a heart). You choose the size and shape yourself. Trace the sample made on fabric 2 times on the reverse side.

1.5 – 2 cm of fabric needs to be made for seam allowances!

After you have outlined the sketch, you begin to embroider the stems: secure the ribbon with a knot and bring it to the wrong side. The ribbon will need to be twisted and then laid according to the picture that was circled. The tape is fixed with hand stitches (they are not visible), threads and needles will help you with this. Next, bring out the needle with the tape (reverse side). The stems remain.

Straighten your heart, straighten the seams carefully. For best results, iron through a damp cloth. This does not apply to the stems.

Satin ribbons are folded in half, and the fold will need to be ironed. Cut the edges at an angle of 45 degrees. Sew the stitch yourself using a needle-forward stitch (along the edge). Rules for execution: bring the needle and thread to the straight side; string beads; backstitch; bring the needle forward, in front of the sewn bead (distance 3 - 4 mm approximately); then the next bead is strung.

The advice is this: try to melt the cut edges of the ribbons in the flame.

Let's start forming flowers. From either edge, pull the thread that sews the length of the ribbon. The gathers are decorated in a flower pattern - form folds and secure them by stitching with a needle and thread. After this, you sew the flowers to the stems (with beads along the edge of the heart). Make a loop of thread with beads. The beads are sewn on using a “back needle” stitch.

A white satin ribbon is sewn to the place where the stems join.

The last step is to tie the ribbon on which you put the ring into a bow.

Work is done. We make such a cute wedding ring pillow.

You can buy a pillow or make it yourself. The main thing is that you like this ring cushion! It will be a great addition to your wedding rings. Initially, it will seem to you that it is difficult to do this and it is easier to just go and buy ready product, but you can do much more and more interesting things with your own hands. Years will pass, you will take out this product and be transported to that day that completely changed your life.

I present to your attention one of best master– classes on making ring cushions with your own hands. Enjoy watching!

Wedding in black and white It’s already difficult to surprise anyone. Newlyweds strive to make their holiday not only unforgettable, but also unique. Therefore, more and more often, celebrations are dedicated to some theme - sea, olive, birch. Young people with a particularly bright temperament have pink weddings, in which red is used everywhere, a symbol of fiery love and roses, denoting sensuality and tenderness. For pink wedding all accessories must be unusual. I would like to clearly demonstrate to you how to create a red pillow with a rose for presenting wedding rings.
You will need a piece of red cloth 35 by 20 cm, thread, cotton wool, white ribbon, white mesh and wide (5 cm) satin ribbon to create a rose. For the petals, purchase some green ribbon. Use hot glue to secure the rose petals. The rosette is made using the technique, to create such petals you can use tweezers and a lighter or a metal ruler with a soldering iron; to work with a hot soldering iron you need glass. When everything is prepared, let's start creating the pillow. Sew the fabric on three sides.

Then stuff it with cotton wool or other soft material. Don't pack it tightly, otherwise the rings will just roll off.

Sew up the fourth side of the pillow.

Now we trim the edge of the pillow with white satin ribbon. A width of 4 cm is suitable. Make clothespins every 4 cm by 2 cm.

You can pin the folds first, and then overcast everything

From the middle tape, sew a figure eight into the corner.

Cover the rest of the area with a net. It can be sewn or glued.

Let's start creating a rose. Mode: tape for 50 squares, their size is 5 cm. You can cut it with either a soldering iron or scissors, but with further melting of the edges over a lighter.

Bend the square as in the picture.

To create a petal for a rose, you need to cut off the base and solder all the layers, in the end we get the following blanks:

We twist the first petal - this is a rosebud.

The reverse side of the flower is glued in one plane.

Let's start creating green sheets. To do this, take a grass-colored ribbon and use scissors to cut out petals that resemble the original ones of a rose flower.