Semicircular bactus with knitting needles. Openwork bactus (shawl) knitted in soft peach color

Part of the ancient folk men's suit in Norway is bactus. This wardrobe element has found its role in today’s times. This is a fairly versatile item that you can easily knit with your own hands. It is worth consciously approaching the choice of shape, pattern and color.

Option "Breakwater"

To knit this product, use the diagrams and descriptions for knitting bactus. So, prepare a yarn of medium thickness. The value of 150 or 200 g depends on the length of the future product. Prepare a marker and knitting needles No. 3, 4.

You can distinguish such varieties, as can be seen in the photo of knitting bactus.

The front surface is used for these purposes. This means using exclusively knit stitches in the knit rows. In purl rows it is necessary to use purl loops.

The next option is to use purl stitch. It is performed in the opposite order to the previous type. That is, purl loops are used in the front rows, and knit loops are used in the purl rows.

If you are interested decor We suggest visiting the website of our partners.

Description

Worth considering more detailed instructions how to tie bactus correctly. The process occurs in three steps, each of which has its own characteristics and distinctive points. They are worth paying attention to.

During the first stage, the mating process begins. Apply simple circuits knitting for beginners so that the product turns out the way you planned. Over time, you can complicate the technique, improving your skills.

Cast on 3 loops, knit 6 rows stockinette stitch. Then add 1 stitch inside and place a marker. After this, you should change the pattern, knit 6 rows purl stitch. At the end, do not forget to repeat the previous step - add 1 loop.

It is necessary to repeat this step-by-step knitting of bactus with your own hands until the product reaches a length of 40 cm. You should be careful, add one loop on each side, alternate different types iron.

The next step is to obtain a rounded profile. To achieve this effect, you need to add 1 loop inside in the 4th row. On the outside, 1 loop should be removed. The length of subsequent knitting should be approximately 30 cm.

The last stage is to achieve even greater inversion. To do this, you need to close 4 loops at the beginning of the 6th row. Then you should add 1 loop. The increase occurs at the end of the row in even numbers, at the beginning - in odd numbers of rows. The result is aesthetic, attractive teeth.

After this, you need to tie the product to the length you need. Cast off the stitches using size 4 needles, beautiful and original scarf ready.

Simple options

It is worth noting that bacti made in classic style made using garter stitch. In this case, all loops are knitted with facial loops. Carius is knitted with stockinette stitch, for example. This is one of the interesting varieties of triangle.

The advantage of such models is that in cold or rainy weather they will definitely keep you warm. This product is universal, suitable for both parents and children.

For beginners, the process is not difficult. To do this, you need to familiarize yourself with the master class on knitting bactus with knitting needles. In general, to knit a stylish, quite beautiful charm you will need approximately 1 - 2 skeins of yarn. For knitting, the best option for knitting needles would be No. 4, 5. The positive thing is that the fabric rises quite quickly during the process.

Note! You should not knit on thin spitz dogs. This is unacceptable for knitting bactus, as tight knitting looks a bit rough. It is not able to form soft folds, which makes the product uncomfortable to wear.

During knitting, you should guide the needles from the tip to the center, gradually moving to the other end of the scarf.

Experienced professionals advise beginners to pay attention to the following nuances. It is necessary to make yarn overs in order to increase the fabric, knitting with rolled knit stitches in the purl rows. Use a centimeter to measure the exact middle of the product. The optimal width of bactus is considered to be 28-30 cm.

If you are interested in a detailed overview of modern home appliances, we recommend visiting the Internet resource: tehnikaportal.ru

The product is quite fashionable, it can be complemented not only winter look, but also summer. It is necessary to combine stylish details and show imagination.

conclusions

A truly beautiful and versatile product that is a must-have in your wardrobe is bactus. There are many options for its manufacture. Use the diagrams and follow the advice of the masters to ensure that your product is the best.

Choose the technology that suits you and make your dreams come true.

Photo of bacti with knitting needles

Bactus is a triangular knitted scarf(or scarf), which can be made in various patterns and complemented with pom-poms or decorative beads. This product is knitted quite simply and quickly, and even beginners can do it. Bactus knitting is done in two main ways.

Methods of execution

1. Knitting begins from one of the side ends of the product, followed by adding and then decreasing loops.
2. Knitting begins from the middle of the product, followed by adding loops in each odd row.

To make our bactus, we used the second method. In this case, you can try on while knitting and stop at any time when the required size of the product suits you completely.

As part of our master class, a small bactus was knitted with knitting needles for a 6-year-old girl. Its dimensions were as follows: width 102 cm, sides 63 cm.

You will need

• (50 g/160 m, 55% cotton, 45% polyacrylic) 2 skeins;
• №4 – 4,5;
• scissors;
• hook.

Bactus knitting. Process description

The peculiarity of knitting bactus from the center is that in each row the first three and last three loops will be edge loops. We will knit them with knit stitches behind the front wall in EVERY row (including purl rows).

• the first yarn over is made after the first three edge loops at the beginning of the row;
• second yarn over just before the center loop;
• the third yarn over immediately after the center loop;
• fourth yarn over before three edge stitches completing the row.

These steps must be repeated on every odd (front) row.

The bactus we described is one of the simplest to perform, and is intended mainly for beginning craftswomen. The general principle of making this product is standard, however, to complicate the task, you can choose any pattern or combination of patterns, then the process will be a little more complicated, and the result much more interesting. The main thing is to turn on your imagination!

Openwork bactus (shawl) knitted in soft peach color

Dimensions: width - 178 cm, height - 76 cm.

You will need: yarn (100% merino, 100 g/307 m) - 3 skeins, circular knitting needles No. 3.5; 2 stocking needles; markers; add. thread for casting on loops.

PATTERNS

Garter stitch: 1 row - facial loops; Row 2 - knit stitches, etc.
Facial surface: Row 1: knit all stitches; Row 2: purl all stitches.

Openwork knitting: knit according to the basic pattern. The diagram shows the pattern repeat.

Border: knit according to the pattern.

Knitting density: 1 repeat = 18 loops = 9 cm.

The shawl has a triangular shape and is knitted from top to bottom.

Using an additional thread, cast on 12 stitches and knit 1 row. Next, knit a row with increases and an installation row.

Row with increases (purl): remove 1 stitch as purl, thread before work, knit 4, put a marker, purl 1, marker, pick up purl 1. from broach, marker, purl 1, marker, knit 5. (13 p.)
Installation row (face row): remove 1 p. as purl, thread before work, knit 4, marker, then knit with openwork according to the pattern to the next. marker, remove marker, 1 stitch in stockinette stitch = center. loop, remove marker, openwork knitting to next. marker, remove marker, knit 5.

Knit the next 35 rows according to the pattern, knit the first and last 5 stitches with a garter pattern, center. knit stitch in stockinette stitch (89 p.) Repeat rows 21-36 of the pattern 8 more times (377 p.). Knit the next 16 rows using the border pattern, according to the diagram, the first and last 5 stitches - garter stitch, center. loop - persons. satin stitch (413 stitches). Then knit another 11 rows in garter stitch and finish knitting the faces. near. Loosely bind off all stitches.

Carefully remove extra. cast-on thread and transfer the stitches onto two stocking needles - 6 stitches each. Connect the loops together with a knit stitch. Thread the ends of the threads.

Border knitting pattern
Border knitting pattern

An unusual mini-shawl or an asymmetrical scarf bactus breakwater is at the same time stylish accessory, and another original item in a fashionista’s wardrobe.

You can knit a simple version with a solid shawl fabric, change the satin stitch in stripes from front to back (alternate them), or you can make the accessory even more interesting and feminine by decorating its edge with a delicate lace border. Fortunately, knitting allows your imagination to run wild and create truly unique things.

It will be much easier if you first learn how to knit a regular bactus without unnecessary complications (in satin stitch) in order to understand the principle of its manufacture. And when you get the hang of it, it’s time to try your hand and stock up on patience and attention for more labor-intensive work - knitting bactus with openwork border. It may take more effort, but the result will be worth it, and the new beautiful thing, knitted with love with your own hands, will warm and delight its owner, and will certainly evoke delight and admiring glances from others.

Description of work

In the proposed version, the main fabric should be made with regular garter stitch. That is, on both sides (both the back and the front) you need to knit only either facial loops (KL) or purl loops (IP). Knit an openwork border, following the attached patterns one by one (work on the first one first, and after completing half the work, move on to the second).

To work, you will need knitting needles No. 2 or 3, melange yarn - 300-400 g and a marker, which can be replaced with a piece of contrasting thread. Follow carefully step by step description and diagrams.

1. To get started, cast on 7 stitches on your knitting needles.
2. Remove one knitting needle and knit a zero (from the wrong side) row according to the pattern.
3. Attach a marker (contrast thread) to the edge.
4. Start working according to the first scheme (the one on the left in the photo). At this stage, do not forget to expand the main fabric (garter stitch) by 3 loops in every 12 rows (i.e., add a loop in every fourth row).

Following this pattern, continue to repeat repeats of 12 rows until half of the product is knitted. This is determined at the discretion of the needlewoman herself based on the desired length and width of the bactus, as well as the remaining number of threads (that is, you need to understand in time that you need to knit exactly as much as has already been done).

When half is connected, it's time to move on to the second pattern (on the right). From this point on, the work will begin to narrow the product, while the pattern of knitting the openwork remains unchanged, all the reduction will take place on the main fabric:

1. Decrease 1 stitch every 4th row (you can remind yourself of this by moving the marker);
2. Continue to follow the 12-row rapport of the openwork with parallel decrease of loops from the fabric until 7 loops remain on the knitting needle.
3. When there are 7 loops left (the same number with which the work began), they need to be loosely closed.

The lace corners in the finished bactus may curl a little at first (immediately after knitting), and this may detract from the appearance of the product. Therefore, the scarf must be wetted and spread on a horizontal surface (preferably on fabric folded in several layers, or on a sheet to absorb moisture), and the corners of the openwork should be pinned with pins or needles. Let the bactus dry in this position. As a result, the lace edge will align and the item will fit perfectly.

You will need: yarn (100% natural wool; 105 m/50 g) for a scarf - 300 g, for a hat - 100 g, coral gray section dyeing; circular knitting needles No. 5; hook No. 4.5; 1 set of double needles No. 4.

Triangular scarf

Dimensions: 180 x 50 cm.

Pattern 1: garter stitch = knit and purl rows - knit stitches.

Pattern 2: main pattern = knit according to. scheme. It shows front and back rows, including edge rows. Complete rows 1-6 once, then continue working by analogy, i.e. on both sides in each front row, perform the given yarn overs and increases, while in each front row the number of loops increases by 6 stitches.

Knitting density: pattern 1 (knitting needles No. 5) 18 p. x 32 r. = 10 x 10 cm. Attention: knit the scarf from the middle of the longitudinal edge. Arrow on pattern = knitting direction.

Description of work: cast on 7 stitches on the needles and knit 1 purl row. This series is not taken into account in subsequent calculations. Continue working with pattern 2. After 122 rows from the starting row (there are 373 stitches on the knitting needles), leave the loops and crochet as follows: * 2 loops from the knitting needle alternately knit the connection. st., lift the next loop onto the hook and perform 1 picot (= 3 ch, then perform 1 st. b/n in the 1st ch), from * repeat another 61 times. After this, the top of the scarf is reached. Knit the next middle loop with 1 connection. st., then, starting with 1 picot, finish the second half of the plank in a mirror image.

Assembly: moisten the scarf and stretch according to sizes indicated on the pattern. For each tassel, cut 80 threads approx. 30 cm and make 3 tassels 15 cm long. Sew the tassels to the corners of the scarf.

A cap

Head circumference: 48-50 cm.

Pattern 1: rib = circular rows (the number of loops is a multiple of 4): alternately knit 2, purl 2.

Pattern 2: garter stitch = rounds: alternate 1 circular row knit, 1 round row purl.

Knitting density: pattern 2 (knitting needles No. 4) 20 sts x 44 rounds. = 10 x 10 cm.

Description of work: cast on 100 loops on stocking needles (= 25 loops per knitting needle), close in a ring and for the strap, knit 5 cm with pattern 1. Continue working with pattern 2. To round the head, after 21 cm = 92 circular rows from the strap, start making decreases as follows: 1 1st round: knit every 3rd and 4th stitch together = 75 sts;

2nd round row: knit without decreasing; 3rd round: knit every 2nd and 3rd stitch together = 50 sts; 4th round row: no decreases; 5th circular row: knit 2 loops together, knit = 25 sts; 6th round: knit 1, then knit 2 stitches together = 13 sts. Then pull off the loops with a working thread. Make a pompom with a diameter of 9 cm and sew it to the middle of the hat.