Airy flowers made from 1 cm ribbons. Chic flowers made from satin ribbons - it's easy! Making elements and assembling a flower

Flowers from satin ribbons wow, how beautiful it is! Everyone has seen them, but not everyone has tried to do them.

Do flowers made from ribbons– it’s very interesting and exciting. Yes, it’s hard to start at first, some things will not work out, but after a while you will learn everything and won’t be able to stop.

Making flowers from ribbons is not as difficult as learning to knit. The main thing is to read this article carefully and you will succeed.

For beginners, we have described in detail the sequence of actions, so repeating step by step and making a lush bow from a narrow silk braid will not be difficult.

Let's look at what is needed to make flowers.

To work you will need:

The ribbons are different in width and color.
Scissors.
Needles.
Threads of different colors.
Glue gun.
Tweezers.
Fishing line.
Sequins.
Beads.
Desk lamp.
Ruler.
Candle.
Soap or chalk.

Let's look at two ways to make flowers from ribbons:

Reflow.

The first way to make flowers is kanzashi.

This technique has arrived to us from Japan. There, using this method, hairpins were decorated. This technique uses three types of petal:

Round petals.
Sharp petals.
Long petals.

You can decorate clothes, headbands with such flowers k, hairpins or barrettes.

How to make a kanzashi flower? Master Class.

First you need to prepare workplace. A clean table and a table lamp are suitable for this.
Cut the tape, five centimeters wide, into and identical squares.
The square must first be folded diagonally, and then the two corners must be lowered towards the central corner. You will get a rhombus.
Bend the side corners of the diamond back, clamp the cut tightly with tweezers.
The cut needs to be straightened with scissors and then scorched with a candle.
You can do it round petal. Make a few more of the same petals.
Gather the resulting petals onto a thread using a needle. You will get a flower. Glue it onto the base, and glue the middle on top.
Kanzashi flower is ready!

Gallery: ribbon flower (25 photos)

DIY flower made from melted petals (master class)

Second way making flowers- this is melting. This technique is used to make a large composition, for example, a basket of flowers.

When performing this technique, you need to take into account some difficulties:

Petals made in this way look not so neat like kanzashi petals.
You may not get petals right away using this technique.
Not all ribbons are suitable for this method. Only satin, nylon, brocade and ordinary ribbons are suitable.

Let's move on to manufacturing.

Prepare a template: draw a circle on cardboard using a compass, cut it out.
Now we make ten petals (minimum). Attach the template to the tape, trace it with a piece of chalk, and then cut it out. Please note that each subsequent petal should be smaller.
Using a candle, scorch the edge of each petal.
Collect the melted petals into a flower. This must be done carefully so that not a single petal moves.
Pin the base of the flower with a pin or needle, and sew a bead in the middle.
The flower is ready!

Chamomile made of satin ribbons

Chamomile is a symbol of tenderness and sincerity. How to make a daisy from ribbons? Let's study.

You can make daisies from ribbons do it in different ways. This will require ribbons of different widths. Let's look at each method step by step:

Ribbon flower 1.2 centimeters wide;
Ribbon flower 5 centimeters;
Flower made of satin ribbon 0.5 centimeters wide;
Ribbon flower 1 centimeter wide.

DIY chamomile made from a 1.2 centimeter wide ribbon (master class)

To make it you will need:

The tape is 1.2 centimeters wide.
Fabric for the base.
Yellow satin cord.
Scissors.
Glue gun.
Candle and matches.

Manufacturing stages.

Cut the ribbon into 26 rectangles. Length each rectangle should be four centimeters.
Cut the top of the segment so that you get a semicircle.
The cut semicircle must be scorched over a candle so that the edges are bent.
Fold the bottom corners from the front side towards the center.
Make the same petals from the remaining segments.
Prepare the base: cut a circle with a diameter of 2.5 centimeters from felt or thick fabric.
Glue 13 petals onto the prepared base.
Then glue the remaining petals under these petals (between them).
Twist the middle of the flower from a yellow cord. Secure it using a glue gun on the resulting flower.
All is ready!

Flower made from ribbon five centimeters wide (master class)

There are two options for making such a flower.

Option one.

To make such a flower you will need:

White satin ribbon five centimeters wide.
Glue gun.
Candle and matches.
Scissors.
Satin cord.
Tweezers.

Stages of work.

Cut the white satin ribbon into fourteen pieces. Each of them should be five centimeters long.
Make a double round kanzashi petal according to the principle described above.
Glue the petals together.
Now make the middle: make a loop from the cord. You need to put another loop on it. Hold the loops with tweezers. Pass the right edge of the cord through three holes. You will get a knot. Burn the edges with a candle. Glue the heart onto the finished flower.
Your handmade flower is ready!

Option two.

To make chamomile you will need:

Satin ribbon in white and yellow.
Matches.
Needle.
Threads.
Scissors.
Candle.
Glue gun.

Stages of work.

Cut the ribbon into strips. The length of each strip should be five or seven centimeters.
Scorch the edges with matches or a candle
Fold each strip to form a corner.
Turn the petal over and connect the two sides again. One petal is ready.
Make ten such petals.
Make the center of the daisy: cut out a small circle from cardboard and cover it with yellow satin ribbon.
Assemble the flower: fold the petals and sew them with a needle and thread. Glue the middle with a glue gun.
Chamomile is ready!

Ribbon flower 0.5 centimeters (master class)

To make it you will need:

Satin ribbon white(width 0.5 centimeters).
Fabric for the base.
Yellow beads.
Glue gun and glue.
Candle and matches.
Scissors.

at 07/02/2017 2,181 Views

A composition of satin ribbons will not leave anyone indifferent at your event.

Not a single wedding salon or store selling decorative goods is complete without flowers made from satin ribbons. Photos of festive decorations amaze with the variety of shapes and colors. Often this “extravaganza” surprises not only with its beauty, but also with its prices, so many needlewomen decided to make a decisive move - to learn how to create flowers from satin ribbons with their own hands. The result was so stunning that many opened their own mini-shops with affordable prices for finished products for those who do not have time to do handicrafts, and websites where they give handmade lessons to everyone.

Complicated flower made of satin ribbon: master class

Delicate bouquet of satin ribbons

Accent combination of turquoise and purple

Beautiful artificial flower from satin ribbons

Luxurious peony made of satin ribbons

Original bouquet-basket with artificial flowers made of satin

Flowers made from satin ribbons (step by step instructions)

Before you start creating masterpieces, you need to decide what and what type of flower we need. Next, all that remains is to prepare the tools and materials and you can start creating.

What may be required

Advice! It is worth using ribbons of different widths - this way the flowers in the overall bouquet will look more diverse.

Cute two-tone satin flower

Satin ribbons. We focus on the intended purpose: if it is a gift, we take bright, rich shades of red, orange, yellow, scarlet, etc. For a middle-aged lady, it is better to mute the tones and turn to burgundy, and for a young girl, choose pastel colors - pink, lilac, white, etc. A separate topic - Wedding accessories. Here you shouldn’t deviate from the classics, and if you don’t have revolutionary red or black dress, it is better to create a composition from a white and blue palette or light yellow and green shades.
Scissors.
Threads. And it doesn’t have to be in tone - they can be anything.
Set of sewing needles.
Glue gun or just glue; the main thing is that the tube has a sharp tip.
Lighter - you will have to set the silk on fire. So that the cut edges do not unravel.
Tweezers are needed to protect your fingers when working with fire when burning the edges of the ribbons.
Wire – it will be needed to secure many elements.
Additional items - headbands, hairpins, baskets, foam, gift paper for bouquets, beads, rhinestones, etc.

Advice! If you don't have a lighter, but you're already inspired, you can use a lit candle.

Tools needed to create satin ribbon flowers

If you're going to be making hair accessories, you'll need a hair clip or headband; If you are planning an ikebana or a basket of flowers, prepare wicker containers and foam plastic - flowers attached to wire will be stuck into it. Also decorative flowers You can decorate photo frames for yourself or as a gift.

Airy and delicate satin chamomile

Beautiful hoop with a large bright flower made of satin

Creation options and technology

It is not difficult to make a flower from satin ribbons, guided by the photo and description of the step-by-step technology.

Simple version for working with children

Let's move in measured steps from simple to professional. In order not to kill the soul's wonderful impulses with the first disappointment, there is no need to take on the most “twisted” versions. Beginning creators and children should practice from the basics, and then move on to more complex options.

Let's practice on the rims. For this we need a couple of ribbons and two beautiful decorative buttons. We take a narrow ribbon and cut several strips from it, the length of each petal will be equal to a quarter of each strip, so we mentally divide the piece of ribbon into 4 parts and determine the size of the flower with the rim. Having found the desired size, prepare 3-5-8 stripes, depending on how many daisies you want to see on your headband.

Advice! To prevent the ribbons from fraying, use a candle flame or a lighter to touch them along the edges.

Place a drop of glue in the middle of the strip, lift the ends, bring them to the center and glue them. We get several blanks, form them into a daisy, gluing them together in the middle or sewing them with a needle and thread. Sew a decorative button into the middle.

We coat the headband with glue, wrap it with a plain ribbon, and sew or glue daisies on top. One daisy can be attached with wire to a clip-on hairpin.

An unusual composition with a lush flower crown will be an excellent decoration for a celebration.

Poinsettia

From satin and other fabrics you can create not only the usual roses and daisies: let’s try to “grow” a poinsettia in half an hour. The satin consumption will be small, and the effect will be unusual.

Materials:

white and green ribbons;
scissors;
lighter;
glue;
felt;
beads and sequins.

Gentle bridal bouquet made of artificial flowers

Progress:

Cut several pieces of green ribbon 6-7 cm long and cut out the shape of the leaves.
We burn each piece, holding it over the flame with tweezers, so that the material becomes slightly wavy.
We bend each sheet lengthwise and pass it over the fire again to create a longitudinal strip.
We make petals - cut 10 pieces of white tape, half 7 cm, the other half 5 cm.
We cut out the petals and burn them along the edges.
We form the middle, take felt, cut out a circle.
We gradually glue leaves and petals to the circle of felt in tiers - the way a poinsettia should look.
We glue sequins and beads in the middle to disguise the rough work.

Accent bouquet in blue and beige tones

Almost a narcissist

We cut five yellow strips of the same length, mark the middle, pinch and glue the opposite edges in the middle, getting bows, and treat the edges with fire. We fold each bow in half and glue it from the bottom edge, then we collect all the petals on a thread, pulling them together in the center so that there is no hole, forming a flower. Sew an orange button in the middle.

Bright autumn composition made of satin

Wild rose hips

We make patterns for petals - we draw templates for three types of petals, reducing them by a centimeter. For example, one is 7, the second is 6, the third is 5 cm. We fold ribbons of the same color, but of different widths several times. To speed up the process, we apply templates and cut out several blanks at once.

As a result, we get three types of petals, 6 pieces of each type. We process all the workpieces in advance over the fire, and then assemble them one by one in tiers. First, in a circle with each other, then we attach the lower one to the larger tier in the middle so that there is a hole in the middle between all the tiers.

You can easily create beautiful peonies from satin with your own hands

We make stamens - we glue pieces of light felt imitating pollen onto pieces of straw or plastic thin and bendable white tubes. Bend slightly in different directions.
We squeeze the flower from below in the area of the hole, insert the stamens and wrap the base with thread, sewing the structure tightly so that it does not fall apart.
You can make leaves - fold a rectangular piece of tape 10 cm long with its corners towards the center and stitch it. We tighten the thread at the base and sew it up with a hidden stitch from the inside out. We make another sheet of slightly smaller size and place it on a circle of green felt. We place the rose itself on this blank.
If with back side attach a pin and a beautiful brooch will come out.

Hairband with flowers made of satin ribbons

Complicated flower made of satin ribbon: master class

Now let's look at a more complicated version of a composite flower made from individual petals of a more bizarre shape. Let's take the rose.

Start:

prepare 4 petals 5 cm long;
bend one edge of each petal at an angle of 45°;
heat and fix with tweezers;
We repeat the same procedure on the other side, we get diamond candies.

You can decorate a box with a satin composition, gift box or add to the postcard

Making the middle, outer petals and leaves:

We bend four pieces of 5 cm each on both sides, sewing them together with threads, forming a small gather along the seam. These are the middle petals. We also make the outer petals from pieces 7 cm long, there should be 8 of them.

We cut out leaves measuring 2.5 x 5 cm, burn them, and make folds. We form veins - we bend and heat the leaves, squeezing them hot.

Assembly:

We twist the first piece into a tube and glue it together;
We attach the remaining 3 around, getting the middle of the bud;
We fasten the outer and middle leaves around the perimeter, forming the blooming part of the flower;
glue the leaves, attach a pin.

Kanzashi flowers made of satin ribbon

The term “kanzashi” came to our lands from Japan, where once upon a time the best geisha decorated their hair with homemade flowers, secretly competing in skills. This is what they called hair decorations. Kanzashi flowers differ in shape and complexity. Let's consider the most popular option.

The technique is simple - many identical petals are made, but different in size. Then they are assembled in tiers using a needle, thread and glue, distributed evenly around the middle, which at the end is crowned with a shining large diamond, in our case a rhinestone.

Contrasting bright flower, created using the kanzashi technique

The lower tier is formed from the largest petals and strung on one thread, then the second tier and so on, gradually decreasing in size towards the center. After this, the layers are stacked on top of each other and secured with glue.

You can make any kind of flowers this way, the main thing is to create the desired shape of the petals.

Sharp kanzashi petals for dahlia

We cut off squares measuring 5 x 5 cm, fold them in half diagonally twice, pinch them at the edge with tweezers, and remove the frayed parts. We solder the ends with fire. Then the raw corner is trimmed and also soldered by fire in its folded form.

Bright bridal bouquet made of satin

Nature is not always able to delight our eyes and satisfy the need for contemplation of beauty. Beautiful fabric, especially the atlas, allow a miracle to happen and give us and our loved ones a magical garden, blooming all year round. The manufacturing technique only seems complicated, as you might think when looking at the finished masterpiece. However, turning to step by step instructions, we understand one thing: the eyes are afraid, but the hands do. The work is so captivating that in the end you can only be surprised at your own professionalism and think about starting your own business related to decor.

The use of satin ribbons in needlework allows you to create beautiful and spectacular crafts. Original satin floral arrangements will delight you with their magnificent appearance; with proper care they will not lose their attractiveness and, unlike freshly cut ones, they will never wither.

Performance various types flowers do not require a lot of material. Consumption is very economical. You just need to master a few easy-to-follow techniques to create original and beautiful jewelry from ordinary satin ribbons.

To create a snow-white, spectacular flower, take:

green and white ribbons;
sequins;
half beads;
felt;
scissors;
glue gun;
lighter.

Step-by-step instruction

Green ribbon cut into strips approximately 6-7 cm long. Oblong leaves are cut out of the resulting segments. The wavy edges and high stretchability of the satin are given by “burning” over the fire. Each leaf is taken with tweezers and burned with a flame from a lighter.

To give the leaves a natural look, they are bent in half to obtain a characteristic bend. When they are ready, each one is held over the flame of a lighter.

White satin ribbon cut into 10 strips. One half is made at 7 cm, and the second at 5 cm. Five larger and five smaller petals are cut out from the segments. As with the leaves, the edges are burned.

The basis for the decoration is a felt circle. Leaves are fixed onto it using a glue gun, and petals are glued on top. The middle of the composition is decorated with sequins and half-beads. You can use any other decoration.

Poinsettia is ready!

The technique for making a rose is similar to the previous one. The materials used are similar, except that a rose can be made different shades, and not just white.

Step-by-step instruction

Create a template

Work on a flower begins with creating a sketch for the petals. It is drawn on a checkered piece of paper. There are two templates. One should be half a centimeter larger than the other.

Pattern of petals

The result should be six large, medium and small petals.

If the edges of the satin elements turn out uneven, do not worry. These deficiencies can be easily corrected by burning. You can use either a lighter or a candle.

The satin petals are held over the flame until the edges begin to melt. To make them wavy, the tape is slightly pulled, giving the desired shape.

The petals are arranged both in a circle and in a checkerboard pattern. It all depends on the idea and the craftswoman’s own preferences. The folded elements are sewn together. When the first row of petals is sewn, the stamens are inserted and secured into the middle. The remaining petals are sewn together and a fully formed flower is obtained.

Formed from green satin ribbon. It is enough to take 10 cm. The ends of the strip are burned. This avoids material disintegration. The corners of the segment are folded towards the center, getting a kind of “triangle” rounded at the top, and stitched at the bottom with a basting stitch.

The thread is pulled until the ends are joined together. The protruding edges of the tape are sewn together with a hidden seam. The result is a lush and beautiful leaf. The number of leaves depends on the overall composition. Most often they make a pair for a rose.

First the leaves and then the rose are glued onto a round felt base with hot glue. This rose can be an excellent brooch. For this purpose, you only need to glue a pin to the back of the felt.

There are many variations to create spectacular and beautiful flowers from ribbons of various widths. Large crafts look best when decorating hats and bags.

They are made from strips cut to approximately 12 cm, which are stitched together and then folded in half. The strip obtained from the sewn pieces is wound in a circle. To keep the composition together, each turn is quilted. You can also twist a rose from a narrow ribbon. One edge of the piece is sewn with basting stitches and then pulled together. The tape is wound in a circle and secured with stitches.

Flowers that were created using more than one technique look especially impressive. This can be a combination of roses made in different ways. The scorched petals allow you to get a rose hip-like rose, which will be perfectly complemented by a small rosette glued to the center on a cone. There are many great ideas you can highlight from the video, use your imagination and create something of your own.

Original and magnificent kanzashi- These are spectacular decorative flowers, which until recently were used exclusively as decorations for Japanese kimonos. Today they have become a popular decoration for clothes, bags, and are used as an accessory for wedding hairstyles or to the prom.

The kanzashi technique is a method of producing flowers that resembles modular origami. Thanks to this, flowers can be given a wide variety of shapes and sizes. The basic modules of the technique include rounded and pointed petals.

Initially, kanzashi were made from natural silk, and the elements were glued together with rice glue. Today, these materials have been replaced by others. Atlas is especially popular. Modules can be connected using hot glue or “Moment”.

Making hyacinth using the kanzashi technique

Using blue ribbon, perform five to six petals using the kanzashi technique. They are strung on a needle to pull a thread through the petals. A knot is not tied at the end. It will serve to insert the stamens into the center.

More recently, I discovered a new kind of hobby and hobby - creating stunning flowers from fabric and ribbons. Having tried different variants, to begin with, I settled on satin ribbons. Exactly how to make flowers from ribbons step by step for beginnersand will be discussed in this article.

You can purchase blanks for creating this splendor at any sewing store; they also sell ribbons of any color or width, stamens for decoration, as well as special brooches and hairpins. And then all that remains is to get an idea on the Internet and begin to bring your flower fantasy to life.

But first, it’s worth familiarizing yourself with some basics in order to correctly assemble the product, secure it so that it does not fall apart at the wrong moment, and the composition looks neat. In this article I will describe all the basics step by step and give practical advice and recommendations.

Even small pieces of fabric or tape are suitable for petals and flowers, but they must be singed along the edges - then the tape will not crumble and delaminate, and additional convenience for work will not hurt. Next, I will introduce you to the most in simple ways on creating petals.

Narrow ribbon flowers step by step for beginners

For such a flower you will need a narrow ribbon, from 0.5 cm to 1.5 cm wide. If the ribbon is very narrow, then pieces of a certain length can be folded and the ends singed so that they stick together. From such petals you can make a chrysanthemum or an aster.

Well, if you make a small knot in the center, the flower will turn out more magnificent and unusual.

It is recommended to fold a wider ribbon with a corner, as shown in the photographs, and the edges will certainly be singed so that the composition does not fall apart. But the petals are collected in stages, since the bottom row should be larger and smaller towards the top.

In addition, such flowers can be sewn to a hat or handbag, to disguise a spot on baby dress or leave for later use.

The petals of their narrow ribbon can be folded in this way.

I’ll tell you about another way to fold petals from a narrow ribbon - but here it is recommended to use a ribbon 4.5 cm wide. Before assembly, the ribbon is cut in a ratio of 1:3 and folded in a zigzag, and the edges are turned away from the wrong side and the front side.

Then the petals are collected on a thread or fishing line and pulled together into a tight bun. The more petals there are, the more magnificent the flower will be; for a small flower, 7 to 9 pieces will be enough. The center of the petal can be decorated according to a template, or as your imagination tells you.

Flowers made from wide ribbons step by step for beginners

I tried creating flowers and petals from ribbons of different lengths and widths, and each of them amazes with its extraordinary beauty. Photos of how to make petals from wide and whole pieces of ribbon can be seen in this article. Well, in the future, I will describe and introduce you to several more ways to create flowers. Here I want to focus on creating petals from a wide and singed ribbon.

To create this extraordinary rose you will need a 2 meter long ribbon. Petals are cut out of it according to a template, or as your imagination tells you. You can use one color, or create a combination of 2-3 shades. Again, the more petals, the more magnificent the flower will be.

When cutting out petals, it is recommended to cut off the edge of the tape; this will make the edges soft and pliable. Burn each piece with the edge of a candle. Next, a bud is formed and sewn from 4 parts. Then we form a bud from 5-6 parts and sew it together. Each row is additionally stitched so that the bud does not fall apart during use.

Many people prefer “Moment - Crystal” glue instead of thread or fishing line to assemble color compositions from silk ribbons, but for beginners it is better not to do this. The glue dries very quickly, and if a mistake is made, it will be impossible to correct anything. And you can practice on a sewn flower by assembling it several times.

This is the rose I ended up with, and note that depending on the number of petals, the rose will be of different sizes.

More options for making roses you.

Content

What could be more unique than a piece of jewelry made with your own hands? Exclusive decoration items are made with satin ribbons. Any novice craftswoman can create flowers, and if you practice, you will get masterpieces. Find out how to decorate clothes and gifts in an original way.

How to make flowers from ribbons with your own hands

There are different methods for assembling flowers from satin ribbons. It will take perseverance, but the results will be amazing. Start with simple things, then use your imagination and create unique jewelry. To make flowers from satin ribbons with your own hands, you will need:

lighter or candle;
sharp scissors;
needle and thread;
glue gun;
tweezers.

DIY flowers made from satin ribbons for a headband

Try decorating your headband using the oriental kanzashi technique. Experiment with colors, number of buds and petals. The creation technology will not cause any difficulties, but if in doubt, watch the master class: the video is below. To create a flower with five petals, you will need 5 pieces of 5x5 cm. You need to take the same number of circles with a diameter of 15 mm, burned around the perimeter. Make a headband like in the photo:

We create flowers from ribbons with our own hands like this:

fold the piece at an angle three times;
perform a fold;
trim the end;
burn, fix;
trim the lower end of the petal;
burn, fix with fingers;
create all 5 petals in the same way;
sew the petals into an inflorescence;
glue a circle of fabric on the back side;
attach to the rim;
decorate.

How to make flowers - roses from ribbons

Making flowers from satin ribbons with your own hands is a fascinating craft. An original rose, as in the photo, can decorate a hairstyle or dress. They do it different ways, we offer one of them. If everything is not clear, watch the video. For production you will need a tape measuring 25 mm. You need to cut 8 pieces 7 and 5 centimeters long, burn the ends.

Start work like this:

make 4 petals from a 5 cm blank;
bend one end at an angle of 45;
the bent edge is heated with the base and fixed with tweezers;
repeat on the other side.

How the middle and outer petals and leaves are made:

4 pieces of 5 cm each are also folded in both directions, but they should be sewn together with threads, making a seam with a slight gather;
Using the same technology, 8 outer petals are made from pieces measuring 7 cm;
leaves are cut from a green blank 2.5x5 cm;
burn around the perimeter, making bends;
veins are made by bending the leaf, heated, and squeezed hot.

Collect ready product in this sequence:

carefully roll the first piece into a tube and fix it with glue;
sequentially glue the next 3 blanks around - this is the middle of the bud;
secure the middle and outer petals, distributing them around the perimeter, forming a blossoming bud;
All that remains is to glue the leaves and secure with a pin.

How to make a flower from a ribbon using the kanzashi technique - daisy

The decorations will be beautiful and elegant - flowers made from satin ribbons with your own hands. To create such a spectacular daisy as in the photo, you will need to make 40 small blanks.

If you have questions about technology, watch the video. The craft can be used as a hairpin or an elegant brooch. For production you will need:

1.2 m of white tape 12 mm wide;
green, yellow – 6 mm wide – 0.3 m each;
2 pieces white felt, in shape - a circle with a diameter of 20 mm;
barrette.

Start making artificial chamomile like this:

cut 40 white blanks 3 cm each;
corners are cut off from one edge;
melt with a lighter, making the petal rounded;
the bottom is folded overlapping, right side inward, melted;
on a felt piece, draw a circle 5 mm from the edge;
the petals are glued along the mark, in a circle;
along the inner circumference they are fixed in a checkerboard pattern.

To create stamens with your own hands, you will need a needle with a wide eye and a narrow yellow ribbon. Do it in this order:

a needle and ribbon are inserted from below into the center of the flower;
pulled out at the top;
wrap the ribbon around the needle one turn, stick it down, fixing the loop;
repeat the operation in a circle from the center to the edges until the weaving covers the inner surface;
for leaves, cut the green blank into 3 parts, fold it in half, and press the fold;
the ends are crossed and fixed with fire;
glued to the bottom of the chamomile;
insert a hairpin into the second circle of felt;
glued to the flower.

Lush flower made from satin ribbon with your own hands - peony

You can learn how to make flowers from ribbons for beginners using the example of peony. It will look like in the photo. You can decorate your hair with peony or elegant dress. Make one big flower using the proposed technology, if necessary, refer to the video tutorial to clarify all the details. To make it you will need 25 mm satin blanks.

Strips needed:

yellow – 1.4 m – cut 22 strips 6 cm long;
pink - 1.3 m - make 27 blanks of 4.5 cm each;
burgundy - 3.2 m - cut 18 strips 6 cm long and 38 strips 5.5 cm long.

A peony is made using the following technology:

cut off the end of the yellow workpiece at a slight angle;
both sides are burned;
screw it onto tweezers, fixing it with glue;
carefully remove - you get a stamen;
take pink strips, cut off a semicircle (you can use a paper pattern);
heat the edge with fire - it is better to use a candle; use your nails to make a wavy surface;
the bottom is folded and fixed with heat;
on burgundy blanks, the edge is rounded;
held over the fire - it will bend outward - the front side is on top;
Make a fold at the bottom, fixing it with fire.

The assembly is done like this:

collect the stamens in 3 rows, fixing them with glue;
glue pink petals, right side inward - in 3 layers;
lay short burgundy blanks inside out, fix with glue;
the last row is made of long petals, the glossy side is on the outside;
decorated with green leaves.

Wedding bouquet of satin ribbons for the bride

A bouquet decorated with your own hands looks very beautiful and will remain as a souvenir of the wedding. The decoration was originally conceived using brooches, beads, lace, as in the photo. To make a bouquet, you first need to make 19 roses, from white and purple, as, for example, in a video tutorial that you can watch for a better understanding.

To decorate the decoration, you must have:

a blank foam ball with a handle;
lace;
thin lilac satin ribbon;
wide – white, purple;
decorative elements - beads, brooches.

In addition to a bouquet, using this technology you can make a topiary - a tree of happiness. The assembly is done like this:

the handle is wrapped in white;
lace is attached to the ball and fixed near the handle;
in the lower part, thin lilac strips folded in half are glued - 12 pieces;
lace - next row;
then folded strips of white and purple ribbons;
Roses are tightly glued to the surface of the ball;
the bouquet is decorated with decor.