Modular origami white rose (flower) mk. Origami rose from paper.

Spring is the time of flowers. But the rose is still the most beautiful. In what techniques only this flower was not made. But of the triangular modules have never been seen anywhere else. This work is not for beginners, especially if you make a bouquet, as folding small modules is more difficult. But nothing is impossible.

Materials:

2 sheets of bright yellow paper, format A 4,

2 sheets of light yellow paper, format A 4,

1 sheet of dark yellow paper, size A 4,

1 sheet of green paper, format A 4,

pVA glue,

thick wire for the stem,

green corrugated paper,

thin wire for leaves,

Progress.

Prepare paper for the flower. It is better to choose several shades of one tone to make the transition between the petals of the middle and the edge.

Prepare modules for rose petals. The modules are folded from 1/64 sheet of format A 4. For one flower, 78 light yellow, 45 dark yellow and 123 bright yellow are required. In total, 246 small modules for the petals are needed for one flower.

The base for the flower should be collected on PVA glue. Only for the foundation you need modules of size 1/32 of a sheet of format A 4. Make 2 rows (first yellow, second green) of 10 modules each, connect in a circle. The remaining details of the rose are made and small modules. When dry, turn out.

Petals are made in the form of arches. Insert one corner of the module into one pocket of the next. When connecting the modules, it is better to use PVA glue so that the flower does not break up.

Petals that are closer to the center are smallest and darker. In our case, we made them from dark yellow paper. For small petals, they made an arch of 13 modules, and insert the 14th and 15th modules in the opposite direction.

To make 3 such petals, i.e., a total of 45 modules are needed for the central dark yellow petals.

Make the middle petals of the yellow modules. Make an arch of 15 modules, and insert the 16th and 17th in the opposite direction. To make such petals 3 pcs.

The largest petals make two-tone. In total, 25 modules are needed per petal, of which 13 are light yellow and 12 are yellow. The tip should be made lighter, i.e. the arch should begin to be assembled from light yellow. Insert the last 2 modules (yellow) in the opposite direction. This is necessary for the convenience of assembling roses. Large petals make 6 pcs.

Glue the smallest petals into the middle of the base.

Then, in between, insert the middle petals. Since the base is made up by pockets, the outer modules inserted on the petals in the opposite direction are conveniently glued to the base. In addition, the base is made of larger modules.

Last attach the largest petals to the base. They can be pushed between each other. Since the arches are assembled on glue, there is no danger that the petal will fall apart.

This is how the rose looks from below.

Leaf. Fold the green modules in size 1/64 of a sheet of format A 4. A total of 45 small modules are needed per sheet. Make an arch of 9 modules.

To make such arches 5 pcs.

Cut 10 strips of thin wire of 7 cm each. Wrap one edge with green corrugated paper.

Glue two wrapped wires on each arch.

Twist the wires together. Connect 5 small leaves and wrap the wire with green corrugated paper.

Cut off the thick wire for the stem. Edge bend, making a loop, wrap with green paper. In the middle of the stem, screw a leaf and stomp the stem with paper.

Glue the stem into the rose head. The flower is ready! Can be put in a vase.

If desired, you can make a large bouquet of roses. Leaves, just like flowers, can be made in different shades. You can change the number of modules in the arch. Make an arch, for example, of 13 modules.

Rose buds are obtained from 5 arches. And the roses themselves can be made of 9 arches (3 of each size). In nature it is impossible to find the same colors, so we can dream up. The main thing to remember is the principle: to make a base into which then the petals-arches are glued.

If you collect flowers in a basket, you get a bouquet.

Maria Petukhova

The master the class is intended for preschool teachers, for preschool teachers, and for all lovers origami. Such a rose can be used as a decoration in the interior, decoration of a gift box.

purpose: the development of creative abilities in children of preschool age in the process modular origami.

Tasks: introduce children to technology " modular origami", arouse interest in the manufacture of this product, develop artistic taste, imagination and imagination.

Necessary materials:

two color office paper (yellow and green)

For making roses to us

For making our rose it is necessary to cut rectangles 6 * 13cm in size - yellow 8 pcs., green 4 pcs.

Then we fold the rectangle in half horizontally and bend each corner to the middle.

And fold inward in half (fold) and so with all the rectangles.

It turned out 12 modules. Divide into four parts (2 yellow, 1 green) and put their arcs in a friend, while green module inside.

Putting it together and dressing them with a thread in the middle.

We begin to bend each module informing a petal.

Bend all yellow modules.

Modules green just straighten. That's what happened!

Related Publications:

Many educators are fond of modular origami. An A4 sheet is divided into 32 parts of which the modules are composed. We decided to make a big one.

As part of the project to familiarize the children of the preparatory group with the fairy tale “Golden Key”, a doll of Malvin was made of colored paper.

At the end of this week, Sunday, February 14th, all lovers celebrate the holiday “Valentine's Day.” Although many say that it is not Orthodox.

On the eve of the Victory Day holiday, I want to bring to your attention the production of cloves using the origami method. Such carnations can be made.

To make a pencil box out of paper, we need to prepare 6 sheets of colored paper, these can be sheets of the same color, like mine, or vice versa, that's it.

The teacher Veremchuk Inna Nikolaevna MBDOU №176 of Vladivostok completed. Origami art is a great exercise for the mind, development.

How beautiful rosesmade in the technique modular origami! I propose to verify this by making uncomplicated buds of the “Queen of Flowers”. As always, there are detailed instructions and vivid illustrations.

Your rose can be of any color or immediately combine two shades. I take red and green for the stem.

How to make a rose in modular origami

For a paper rose you will need:

• 144 red modules;
• 42 green triangles;
• pVA glue.

First, prepare 4x6 cm leaflets and fold all the modules out of them. See how to do it.

With ready-made parts on hand, start assembling. Take 12 red triangles and connect them to another 12 by inserting the long ends of the modules of the first row into the pockets of the triangles of the second row. Close the circle.

Continue assembling in a circle. The number of modules in each row is the same - 12 pieces. Complete 9 more rows except the two that you have.

The final 12 row consists of 12 green triangles. In addition, insert the green modules into the holes of the last row through the two parts. You need to insert the other end, that is, sharp inward.

The bud is almost ready. It remains to make protruding petals in the upper part. To do this, install in the holes of the modules of the first row 2 and 1 triangles in four places. First, two modules are inserted, a third is put on them.

To make a rose of two colors, use the same instruction, only from the second row alternate two colors, for example, white and orange: 2 white modules and 1 orange. The upper petals are also orange.

Rose stalk

The stem is assembled separately from green parts. Connect chain 23 of the module. Insert one side from the other end to get a spike. Fix it with glue.

Connect the stem and bud together, directing it into the hole in the base of the flower. Fix with glue.

Beautiful modular rose is ready! No one bothers you to create a whole bouquet and put it in a vase or basket. The assembly method is simple and accessible even to children. Another big plus - you do not need to prepare a huge number of parts.

I wish you success in your work and beautiful crafts! Subscribe to new articles!

Rose origami not complicated in execution and consists of one sheet of paper. Detailed master class assembly of origami roses made a photo Ella ka users of the site Country Masters, many thanks to her for this.
paper rose can be used as a decoration separately or as a module for creating floral kusudam.

1. To assemble a rose, take 1 A4 sheet of red color on both sides. From one sheet we get 2 squares measuring 14.85 x 14.85 cm.

2. Fold the square in half, unfold the sheet and fold in half again.

3. Turn the leaf over.

4. Fold the edge to the middle, but press only the middle part, the edges on both sides should not be bent!

5. Similarly repeat from all sides.

6. Fold diagonally on both sides, also pressing only the middle part, the corners should remain unbent!

7. Expand the sheet, this is how it should turn out.

8. On the left side of each corner measure 2.75 cm. (This distance was determined experimentally, that is, it is slightly larger than one third of the fold. If you take a sheet of paper of a different size, then this distance, respectively will be different).

9. Mark the fold line to the corner where the convergence point of 3 folds. I did it with a wand. She lined the cardboard. Repeat from 4 angles.

10. It will turn out as in the photo below.

11. This is better seen. I marked all the fold lines.

12. Bend along the outlined side lines. Do not bend anything else.

13. Now the most interesting and difficult to explain in the photo.

14. Four fingers I take on four sides. So.

15. It looks like this from below. Here in this place put the palm of the other hand, and ... slightly pressing and straightening the corners outward and upward, we twist, turning our hands in the opposite direction to each other. That is, here - the top of the future flower - clockwise, the bottom - against. (If the side oblique lines are bent on the right sides of the corners, then we twist - top - counterclockwise, and bottom - clockwise)

16. It should turn out like this!

17. The view from the bottom

18. Glue 4 outer petals.

19. Twist the center of the rose with tweezers

20. Twist the rose petals out with scissors. The origami rose is ready!

For centuries, roses have inspired people for love and brought beauty to those who received them. In fact, people admire these flowers for thousands of years, they have been fascinated by roses since the beginning of time, they have always admired the beauty of these wonderful flowers! You may have heard that the floors of Cleopatra’s palace were strewn with delicate rose petals, and the wise and knowledgeable Confucius kept 600 books on the specifics of grooming roses in his library. In this workshop you will learn how to fold such a beautiful rose model with your own hands.

Start assembly 1. Make a transverse fold in half of the sheet 2. Make a longitudinal fold in half 3. Fold the top and bottom of the sheet to the center fold 4. Fold the left and right sides of the sheet to the center fold 5. Make the specified folds by dividing the squares in the poplam horizontally 6. Make the same folds, but vertically 7. In the end, we should have such squares 8. Make diagonal folds. One 9. And the second