Knitted coasters for plates. Crochet coasters for hot chamomile

Hello.

Today I’ll tell you how to crochet a hot stand. I ended up with a set of 6 square napkins.

These napkins will decorate festive table and protect it from stains and scratches. And also, as my 14-year-old daughter says, it will become atmospheric with them)))

Because I wanted to knit something that was not thin openwork napkins, and coasters for hot dishes, cups, glasses, etc., then I chose fairly thick threads. This is Turkish yarn LILY (mercerized cotton 100%, weight 50 g, thread length - 125 m). Knitted with crochet number 2.5.

The size of the hot tray is 18 x 18 cm.

How to crochet a hot stand

So, step-by-step photo master class: how to crochet a hot stand.

At the beginning of each row we knit lifting loops
at the end of the row - a connecting post (connecting post)
In addition to the usual loops and stitches with 1 and 2 crochets, we will knit crossing stitches with 5 crochets ( detailed description from photo below)
The number of double crochets in the last row may not correspond to that indicated in the diagram

5th row: 2 VP rise, 5 treble crochets in the arch of 4 VPs, 1 treble crochet stitch at the top of 4 treble crochet stitches. Next we knit a chain of 11 VPs. We turn the work, knit the connection st. under the second VP of the rise (hereinafter - under the st.b/n above the top of the 4 st.s.2n). We do 2 VP lifts, we turn our future one again and tie the arch of 11 VP with the 18th st.b/n. We knit 12 single stitches, tying a large circle, make a chain of 11 VPs and repeat the steps described above. The result is a large circle and 8 semicircles.
Row 6: we tie these arches, forming 4 corners for the square with a crochet hook. We start with 3 VP rises, then knit *2 VP, 1 treble s/n* 8 times. Let's move on to the next arch. *1 treble s/n, 2 VP* 4 times, 1 treble s/n, 10 VP, We turn the work, knit a connecting stitch, make 2 VP lifts, turn the napkin again and tie the corner “loop” of 10 VP with the 18th st.b/n. Then connection art. at the base of the “loop”, * 2 VP, 1 treble s/n * 4 times. We repeat all the above steps 3 more times.
7th row: alternate 1 st.b/n and 4 VP. (see crochet square diagram above). It turned out beautiful already)))
Row 8: first you need to use connecting columns to “get” to the 3rd arch. If you are knitting multi-colored square napkins, then start this row from the top center arch, as shown in the diagram. 3 VP lifts, then 3 VP, 1 st.b/n, 3 VP, 1 st.s/n, 2 VP,
further ATTENTION! We knit the “letter Z”: make 5 yarn overs on the hook, insert the hook through 1 arch, knit 2 yarn overs, We make 1 yarn over, 1 unknitted treble crochet through 1 arch, we make 2 yarn overs, we knit 1 untied treble stitch through 1 more arch. There are 3 yarn overs and 3 uncrocheted stitches on the hook. We grab the thread, pull it through 3 of these columns, and then knit 3 yarn overs. Next we knit 2 VP and treble s2n into the common top of three columns, 2 more VP and treble s3n there. The result is the “letter Z”)))
Next, we alternate the columns and VP again, according to the diagram. We already have a square:
Row 9: It remains to tie it with double crochets. By the way, I have fewer of these columns than provided for in the diagram (otherwise the edges of the square would become wavy).

Crocheted hot stand is almost ready

We suggest connecting beautiful gift with your own hands - original crochet hot stand. A kitchen decorated with personal crafts will always be a favorite place for the whole family.

You will need: any yarn, preferably cotton (green, white, yellow) and a hook.

Video master class on crocheting a hot coaster Chamomile:

Description of the process of crocheting a hot stand Chamomile:

1st row: Using yellow yarn we cast on 7 air loops and close them into a ring with a connecting post.
Row 2: Cast on 3 chain stitches and knit 2 double crochets into each loop. There are 15 columns in total.
Row 3: Using white yarn, cast on 7 chain stitches + 3 lifting stitches and begin knitting. We knit 2 double crochet stitches, 3 single crochet stitches and 2 single crochet stitches. We attach our petal to the next loop with a connecting post. You and I should have 15 petals.
Row 4: Insert green yarn, knit 1 single crochet and 4 chain stitches in the middle of the petal, between the petals and thus complete the row.
Row 5: Using white yarn, we knit 1 single crochet into each loop. There are 75 columns in total.

And our beautiful hot stand is ready.

Example crochet coasters for a mug "Chamomile":

Thank you for your attention. We hope everything worked out for you.

Smooth and easy stitches for you!

Knitted items for the kitchen - coasters, potholders, napkins will create comfort and decorate the house, and these are also practical things. Hot stand - knitted flower will always be on hand work surface table and its decoration.

You can use leftover multi-colored yarn to knit potholders. The main detail of the stand is the “mill” motif, crocheted according to the diagram below.

Make the only change to the knitting motif - knit the last row with the segments rounded. To do this, instead of 19 st s/n * knit from the arch - st b/n, half st., st s/n, now along the previous row of columns - st s/n, 11 st s/2n, 2 st s/n, half st ., st. b/n, air. loops. Repeat from * 5 more times.

We convert the knitted “mill” motif with rounded segments into a flower by tying each segment along the edge. For tying, choose yarn in a contrasting color.

Do the tying of the petal segments along the wrong side of the motif, so that on the front part the petals are wrapped in a spiral counterclockwise. Attach the thread at the beginning of the segment, make 3 chain lifting loops and, inserting the hook behind the outermost column, knit 3 treble stitches along each row.

Along the top of the segment, knit 3 treble stitches from one loop through 2. Having finished tying one petal, fasten and cut the thread.

Tie all the segments of the motif, each time joining the thread at the center, and you will get large flower petals twisted into a spiral.

Sew a knitted flower onto the center of the stand. You can choose a pattern for knitting a flower.

Hot coasters are an example of affordable little things that will add unique comfort and create a warm atmosphere in your kitchen. Working on them does not require any special skills and is accessible to beginners. In addition, the coasters are knitted quickly; you can use leftover yarn for them. The article discusses various options for a stand for hot crochet with and without patterns, when for knitting a simple description and photo is enough.

Hot stand “Rose”

The diameter of the finished stand is 21cm.

We will need:

yarn, 100% acrylic, 100g x 180m, yellow, golden, white and emerald colors;
hook No.1,3.

Description

The hot tray consists of 2 parts.

Upper

We start with yellow yarn. We crochet 6 VP, close the connection into a ring. s-k. Further:

1p.: 5 VP, (Dc in the ring, 2 chain stitches) x7, attach conn. Art. in the 3rd p. of the original chain of 5 chain stitches. In total, we have 8 StSN and 8 arches from two VPs;
2p.: (DC, 1 chain stitch, 4 chain stitches, 1 chain stitch, sc) - in each. arch of 2 air stitches in a circle, connect the connection. Art. in the 1st art. Total – 8 petals;
3rd row: (4 chain stitches, sc in sc between the petals of the 2nd row) - in the round, join a sl st into the 1st stitch. Total - 8 arches from 4 VP;
4 rows: (RS, 1 chain stitch, 6 chain stitches, 1 chain stitch, sc) – in each. arch of 4 air stitches in a circle, connect the connection. s-k in the 1st s-k. Total – 8 petals;
5 r.: (4 chain stitches, sc in sc between the petals of the 4th row) - in the round, join the sl st into the 1st st. Total - 8 arches from 4 VP;
6p.: (RS, 1 chain stitch, 8 DC, 1 chain stitch, sc) – in each. an arch of 4 air stitches in a circle, we connect the SS into the 1st s-k. Total - 8 petals.

We cut the yellow thread, connect the golden one and crochet No. 1.3 (sc, 3 sc, sc) in each. s-k petal. Cut the thread.

7p.: connect the thread between any petals from the wrong side. sides. We perform (7 chain stitches, sc) between the next. 2 petals on the wrong side in a circle. We close the connection. st. in the 1st st. It turned out 8 arches from 7 air stitches;
8r.: 1 air. p., (s-k without/n., s-k with/nak., 7 St2N, st. s/n., st. b/n) - in each arch of 7 air. p. in a circular manner. It turned out to be 8 petals. Cut the thread.

In any 2nd St2H of any petal we connect a white thread and continue crocheting a hot stand:

9r.: 7 air. p., skip 3 St2N, StBN in the next one. Stlb, (5 air stitches, St2N in the 1st s-k trace. petal, 5 air. p., StBN in the 2nd St2N of the same petal, 7 VP; skip 3 double crochet stitches, single crochet stitch in the next row. stlb)x7, 5 VP, s-k with 2 yarn overs in the 1st st. next petal, 5 VP, attach connection. Art. in the 1st st. Cut the thread.

Lower

Let's start knitting with white yarn:

1st row: 6 VP, close the connection into a ring. column, 3 air p., 11 double crochet stitches. into a ring, connect the connection. Art. with the top of a chain of 3 air. pet. We have 12 columns with caps;
2p.: 4 air. p., 2 columns with 2 nak. into each pillar. in a circle, closing the river. Total 24 st-k with 2 nak.;
3r.: 4 air. p., 2 columns with 2 nak. in each column. in a circle, closing the river. There are 48 pillars in total. with 2 caps;
4p.: 4 VP, (2 StS2N in the next column, StS2N in the next st) round until the last stitch, 2 StS2N in it, close the r. Total 72 double crochets;
5 rubles: 3 air. p., (2 dc in the next stitch, dc in the next three stitches, 2 dc in the next st, dc in the next 4 stitches) - repeat for the entire row, close the row. We have 88 StSN.

Assembly

We fold the parts of the hot stand with the right sides facing out and crochet it in the round through the loops of the lower part and the arches of the upper part: (3 single stitches in an arch of 7 chain stitches, 4 single stitches in each of the next 2 arches from 5 air p.). We close the river. conn. stlb in 1st column. Cut the thread.

We connect the sc in any column with a yellow thread, skip the next one. pillar. and repeat further: (5 columns with nak. in the next column, skip the next column, sc in the next column, skip the next column), 12 air. n. (this will be a loop - pendant), conn. column in the same column. Cut the thread.

Harness

We tie all the petals of the last yellow row with golden yarn, working in each stitch (Stbn, 3 chain stitches, Stbn). Cut the thread.

Hot stand “Star”: MK video

Square hot stand

Size: 16cm by 16cm.

We will need:

yarn containing 92% acrylic, 8% polyester, 65g per 220m - 65g;
yarn containing 44% cotton, 35% polyacrylic, 21% polyamide, 50g per 90m - 50g;
hook No. 2.5-3.

main: crocheted according to the pattern.

Today many people knit or crochet. And every craftswoman invariably has leftovers of beautiful yarn, from which you can knit a lot of convenient and practical things to decorate your home.

For example, simple coasters for hot crochet, the patterns and production of which are accessible even to beginner knitters.

Knitted coasters based on a circle are very simple to make. But if you decorate them with a variety of knitted elements, you can end up with a very original and modern design. practical decorations for the table. The simplest option is an apple-shaped stand.

For it you will need:

yarn about 80 g, main color,
30 g of contrasting color for knitting a petal,
hook of the appropriate size, No. 3 or 3.5.

Description of crocheting a hot stand in the shape of an apple:

Using yarn of the main color, knit a ring of 4 air loops. Next knit in a circle st. b/n, guided by diagram A, to the desired size.

Using yarn of a contrasting color according to pattern B, knit one or two leaves. Using brown yarn, knit a stem using chain stitches. Then assemble all the parts and sew them to the apple.

You can crochet a hot stand in the shape of a pear.

Description of work:

Knit a circle according to pattern A. Without breaking the thread, turn the work, knit 5 non-woven stitches, turn the work again and knit 5 rows in this way. Then tie the pear around the edge with non-woven stitches, decorate with leaves knitted according to pattern B.

Based on the circle, a bright and easy-to-make hot pot stand is crocheted in the shape of a flower. This is done like this: knit a circle according to pattern A, tie it with petals with a thread of a contrasting color: five double crochets, two double crochets, etc. until the end of the row.

A very practical do-it-yourself hot stand is made using the double-sided knitting technique.

The double-sided fabric is very thick, knitted without a backing, so the stand can be used on both sides.

Stand size 16x16 cm. Required: medium-thick green and orange yarn, about 80 g, hook No. 3.

Using an orange thread, cast on a chain of chain stitches 16 cm long. Knit the first row with single stitches, the last st. knit with green thread. Turn knitting.
Insert the hook under the two outer walls of the st. b/n (top and bottom) of the previous row. It is important that the upper and lower walls, which are tacked, are positioned strictly in front of each other, then the canvas will not move.
Pull out the green thread and tie a single stitch. Work like this until the end of the row.
Turn the knitting over and knit the next row in non-woven stitches with green yarn, insert the hook under the inner wall of the non-woven stitches of the previous row. Work like this until the end of the row.
Knit the outermost column with orange thread.
Knit single stitches with orange yarn. Insert the hook under the inner walls of the columns of orange yarn and the columns of the row of green yarn. The walls of the posts that are tacked must be positioned strictly in front of each other so that the canvas does not move. Knit to the end of the row.
Turn the fabric, knit stitches with orange yarn to the end of the row, insert the hook under the inner wall of the posts of the previous row. Knit the last stitch with green thread. Continue knitting by analogy.
Knit a 16x16 cm square. Tie the green side of the stand with orange yarn, and the orange side with green yarn as follows: *screw stitch, skip 2 warp loops, 5 b/n stitches in one warp loop, skip 2 warp loops *, repeat from to *. Knit the corners of the stand in 7 stitches instead of five.

This stand can be knitted in different colors: yellow-blue, pink-violet, black and white, etc.

Practical and original crochet crocheted coasters that use metal caps from beer bottles

Although some craftswomen also use plastic lids. This pattern can be knitted from leftover yarn of different colors.

Description of work:

Knit a chain of 4 air loops, using a connecting loop to close the ring.
1st row: 1st century. p. lifting, then 7 columns of non-woven stitches in a ring of air loops. Finish the row with a connecting column.
Then continue to knit in a spiral with non-woven stitches, increasing each row by 5 non-woven stitches until the size of the circle is equal to the size of the lid.
Next, knit one row without changes, and in the next, decrease 5 stitches in each row, reducing the number of stitches to nothing. Cut the thread. Connect the resulting parts by stitching in any order: in the form geometric figure or in the form of a bunch of grapes.