How to make crafts with your own hands from beads. Simple but effective bead crafts

If you want to make a brooch with your own hands, use beads for this. The same material will tell you how to decorate eggs for Easter and make a picturesque tree.

How to make a tree from beads?

As a result, it will turn out to be so refined and shimmering. For creative work you will need the following materials:

wire;
cut beads or green bugles;
beads white and yellow or red and pink;
floss or silk thread;
floral tape;
PVA glue;
brown acrylic paint;
gypsum.

As a stand, you can use a suitable glass container, for example, a vase, a deep rosette or a candlestick.

The first tree element we will create is a leaf. For it you need to cut a piece of wire, string green bugles on it, using French way weaving.

The diagrams will show you how to weave beads using it.

For our leaf you will need a piece of wire about 30 cm long. Make a small loop at one end and twist the wire 3 times in this place.

From the other end, string beads for the central part of the sheet. On this photo There are 5 of them, and for our leaf we will need two pieces.

Start folding the wire almost in half, but not all the way. Insert three fingers of your left hand into the resulting loop and twist the wire in this place, as shown in the second picture.

As you noticed, the example has two columns of images. The right one will help make a round leaf, and the left one will help make it pointed.

Complete the element based on the hint in the left column, not paying attention to the numbering.

Now string 4 beads onto the upper end of the wire for our sheet. This row is considered the first. Bend the working end of the wire in this place so that it makes an angle of 45° with the central element.

Now bend the working end of the wire as shown in the figure number 9 in the left column. String 4 beads onto this part of the wire and twist. Now string 7 beads, twist the wire in this second top row and make the second bottom row, also stringing 7 beads.

Here's how to weave leaf-shaped beads. For beginners, diagrams will make it easier to understand the intricacies of the process. After you have made 50–100 similar blanks (their number depends on the size of the tree), start making flowers from beads.

They are made using the loop method. You will need to make blanks consisting of two circles, in the middle there will be 5 beads. Schemes will help you make flowers from beads.

Next, make a stamen for each flower. Cut a piece of wire, string 5-6 beads onto it, twisting the wire under each and leaving a distance of 1-1.5 cm between them. Insert these blanks into the middle of the flower.

Assembling the product

We start doing this from the branches.

Assemble the trefoil by attaching one leaf to the top of the wire, and two on the sides, stretching them out a little, pressing them on both sides with your fingers. Twist the wire with floss or thread. Make 3 of the same elements, connect them and also drape the wire with brown thread.

You will alternate such preparations with a flowering branch. For it you need to connect 2 shamrocks and 1 flower.

Now you need to assemble the main branches of the tree from beads. To do this, twist flowering branches and shamrocks in pairs. Then wrap the wire with floral tape.

Speaking about how to make a tree from beads, you need to tell that first you will arrange all the branches. Divide them into 2 or 3 groups, and then put plaster in the prepared glass container and place the branches in it.

Wait for the plaster to dry. To prevent the tree from leaning, place it for this time where there is no strong wind and no one will hit it.

After this, you need to give the texture to the trunk. Add PVA glue to the plaster, mix to form a viscous mass. Apply it to the trunk, giving it realistic irregularities and roughness. When this solution dries well, the beaded trees, or rather their trunks, are covered with several layers acrylic paint, and then with varnish. Make sure that each previous one dries well, only then apply the next one.

Here's how to make a beaded tree. Now it can be placed in the most prominent place so that it decorates the house and delights the family and visiting guests with its irresistible appearance.

Faberge eggs for Easter made of beads

They can be made for Easter and decorate your home in this way. Such a handmade creation will be a wonderful gift not only for this holiday, but also for any other joyful event.

egg;
fireproof ladle;
candle;
glue “moment-crystal”;
PVA glue";
clip;
needle;
beads;
threads

First you need to carefully remove the contents from the egg. To do this, make a small depression in the center of its sharp end, for example, with a needle, and on the other side - a little larger. Holding the egg like this, blow out its contents.

Gently rinse the inside by blowing out the water. Now cover the small hole with a piece of paper. Cut the candle into pieces and melt it in a ladle.

Pour paraffin into the egg through the large hole.

Please note that as paraffin hardens, it decreases in volume. So after waiting, add it all the way to the top to fill the Easter egg.

Since the glue does not adhere to the paraffin, scrape off the excess mass with a knife and cover the hole with paper, which will adhere well to the still plastic, not completely hardened wax.

Using wire cutters, break off the curved top of the paperclip, thread the thread into the needle, making a knot. Place it on the center of the blunt edge of the egg and secure it with a paperclip.

Pour the beads onto a flat plate, string them onto this thread 10 cm at a time. Pump glue onto a small area of the souvenir egg and lay the beads in a spiral.

When the thread comes to an end, cut it near the needle and glue it. Secure the end of the next thread with glue nearby and continue stringing beads.

To create a symmetrical pattern, start from the middle of the egg with colors in the reverse order.

This is how bead weaving works easter egg. If you have any materials left over, make one or more souvenirs. To do this, you can mix beads and string them in a chaotic order or make the upper and lower parts as such, and the central one from 2-3 symmetrically distributed colors.

Here is another simple version of bead weaving, for beginners and children it will not be difficult to make such charming insects.

How to make a butterfly from beads?

The following materials are needed for work:

wire, 30 cm long;
beads of different colors;
2 dark colored beads for the eyes.

To work efficiently, good lighting is necessary. To prevent your eyes from getting tired, do gymnastics for them periodically. You can pour small beads into an empty candy box with a fleecy cloth at the bottom.

They will tell you how to make butterflies from beads.

String one light brown bead onto the central section of the wire. Then let the ends of the wire meet each other, put the next bead on them. A weaving pattern will help you understand how a beaded butterfly is made at this stage.

Continue creating the body in this manner until the lower wings. At this point, separate two pieces of wire, string 18 pieces of colorful beads onto each of them. Bend these sections into a drop shape as shown in the diagram, pass both ends of the wire through the fifth bead on the body, and the lower wings of the butterfly are ready.

String a light brown bead onto both ends of the wire; it will be the sixth bead of the body. Now separate the wire in two again, string 24 beads on the 1st and 2nd edges, bend these sections in the form of upper wings, thread the ends of the wire through the sixth bead of the body.

Weaving a butterfly from beads will soon be completed. For now we need to create her eyes. String a dark bead on each end of the wire, twist the wire, put one bead on it light brown. Twist the two ends of the wire together one last time, bending their edges in the form of insect whiskers, which are 5 cm long.

The diagrams also clearly demonstrate how weaving a butterfly from beads is completed. When you master this simple method of creating a beautiful insect, then you can move on to a more complex one. Schemes will also help you weave such butterflies from beads.

DIY brooches

The master class clearly explains how this beaded butterfly is made. For it you will need beads of orange, red, black and yellow.

Cut a wire about 30 cm long. Find its middle and string a black bead here. Twist and thread the next black bead onto the wire. Twist again, put on 2 beads, and then two more. The diagrams also clearly demonstrate how the body of a butterfly is made from beads.

In picture “b” you can see how to start creating her body. Diagram “c” demonstrates that you then need to tighten the wire so that the beads fit tightly to each other. Bring the ends of the wire up and bend them in the form of insect antennae.

Look at diagram "d". This will help create the top left wing of the butterfly. Also bend a piece of wire, string an orange bead on it, intertwine the two ends of the wire, string 2 orange beads in the second row. The third row consists of 3 pieces - in the center there is a red one, and on the sides there are two orange beads. Also focusing on the “d” diagram, you will create the entire left upper wing.

Then pass both ends of the wire through the body of the butterfly, bring them out through the other side and, based on diagram "d", create the upper right wing. Diagram "e" shows how to shape the upper wings. Now let's take care of the lower ones, we also begin to weave each of them from a corner.

For the bottom right, string first one red bead, then in the second row - two red ones. The third row consists of a red one, then there are three orange ones and 1 red completes this row. Once the bottom right wing is created, bring both ends of the wire through the body in the opposite direction and make the bottom left wing.

If you want to turn the butterfly into a brooch, then attach a snap pin to the back and you've got an elegant accessory for any outfit.

Another diagram will help create an insect of green or another color.

This is how a beautiful beaded butterfly is made. For beginners, diagrams, descriptions and photographs will help simplify this process, making not only insects, but also a three-dimensional tree, an Easter egg.

Watch the videos that clearly show how to make such interesting crafts:

Beads are one of the most famous materials that people use to create various jewelry, clothing, and decor. Beads have been known since the times of Ancient Egypt, but to this day, they do not lose their relevance. Experienced craftsmen create real masterpieces from it, and today we will tell you in detail what you can make from these small beads with your own hands. So let's get started.

You can make all kinds of jewelry from beads: necklaces, chokers, bracelets, pendants, brooches, chains, hairpins, earrings, rings.

Accessories and items of clothing: collars, belts, handbags, clutches, fishnet gloves, keychains

Decorative interior decorations: trees, flowers, beaded paintings, animal figurines, angels.

And many, many other items. Beginners in beadwork, looking at the work of experienced craftsmen, never cease to be amazed at the whimsicality of forms and imagination, and dream of creating something extraordinary. But it’s better to start with something simpler and get better at less complex products.

What can be made from beads: product diagrams for beginners

Bugle bead bracelet

One of the easiest decorations. It has a very simple scheme:

And to make it we only need 6-7mm glass beads and wire. As a result of simple steps you will get a bracelet like this:

Star

It can be used as a decoration for flowers, a keychain or, if paired with it, as earrings.

To weave such a star, look at three patterns for weaving it.

First you need to make 5 diamonds using the two-thread technique, as in Fig. 1. Then, the diamonds need to be combined. To do this, you need to thread the wire through the first rows, and insert one bead between the diamonds. Take large bead and insert it into the middle of the star (in Figure 2). Also, the diamonds are connected at the level of 4 rows, and 3 beads are inserted between them, as in figure 3. We get a cute little star.

For weaving jewelry, it is best to use fishing line - it is stronger than many threads and easier to work with. Wire is suitable for weaving decorative elements, animals, and accessories, as it allows the product to keep its shape.

What can be made from beads, fishing line and wire? For example, a beautiful heart pendant.

Heart pendant

To create it, copper wire, about 1 mm thick, beads, beads, crystals, glass beads of various colors is used. Following a simple pattern. We can make such a heart very quickly and then use it as a keychain, pendant or interior decoration:

Necklaces

The fishing lines make beautiful and stylish necklaces:

A necklace like the one in the photo is very easy to make. You just need to string beads of red shades onto 12 pieces of fishing line, the length of which is about 70cm. You need to make a knot at the ends of the fishing line so that the beads do not fall apart. Then, divide the resulting bead strands into 4 equal parts (three strands each) and weave a necklace according to the following pattern:

After the necklace is woven, special fittings are put on its ends - the clasps and the necklace are ready!

Extra beads

No craftswoman will ever complain that she has extra beads left. In a business like beading, there is no excess material. What can be made from leftover beads? If the remaining beads are not enough for something large, then the simplest option is thin and elegant threads of beads, for example, these:

The main thing to remember is that if we string only beads, such beads will look extremely boring, but if we add several beads different sizes, in tone or in contrast, then they will immediately play differently.

You can make an original bracelet from lace and beads.

To do this you need to take a piece of lace:

And embroider flowers or an ornament on it (you can repeat the pattern of the lace itself), with beads.

You can attach a lock to the ends of such a bracelet, if available. Or sew thin ties from ribbon or lace.

We also invite you to watch a video master class on making stylish long earrings from beads. Happy creativity!

Video for beginners

Here is such a stylish birch:

Crocodiles in the form of keychains:

Collar:

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

The creations of bead weaving craftswomen are a whole art, and some of their works are rightfully called masterpieces. Learning to create beautiful things from beads is not as difficult as they think, the main thing is to learn the necessary techniques. Beadwork lessons for beginners are easy to learn, but you need to have such qualities as perseverance, patience and a great desire to create beauty. If you decide to try bead weaving, you will never be disappointed with the results.

Basic bead weaving techniques with patterns

If you decide to create beautiful thing from beads, but don’t yet know how to do it, then first choose a convenient weaving pattern for yourself. But the main thing is to find large beads that are more suitable for the base of beadwork for beginning needlewomen. Do not take too large items to work for the first time - they require skill and a lot of time. To a large extent the view finished work will depend on the quality of the chosen material. Therefore, if you notice unevenness on the wire or foreign inclusions on the beads, then discard such material.

To choose the right material, follow a few tips:

Choose beads according to the shape and color indicated in the diagram.
When purchasing, inspect the bag or jar to ensure there are no defective beads.
The size of the beads is determined by the number. The smaller the number on the package, the larger the beads.
For beginners, it is recommended to choose a wire that models the outlines of the finished elements. The fishing line varies in thickness and color, and also requires the purchase of a needle for the job.

Mosaic weaving

For most needlewomen, the mosaic weaving technique is banal and simple. But even experienced craftswomen make mistakes, so it is important for beginners not to miss all the details of the scheme. In mosaic weaving, the beads are arranged in a checkerboard pattern, forming a dense fabric. Its main principles:

work is done on one thread;
the number of beads must be a multiple of 2;
In order to weave a fabric onto an uncountable amount of beads, additional thread passes are needed through the outer beads.

Weaving an even mosaic fabric begins with a set of an even number of beads that make up the first row. For the second row, cast on one bead and pass the needle through the second bead from the end of the row. Then pick up a bead, stitching through the fourth one from the end of the row and so on. To complete the row, pass the needle through the first bead strung. In order to cast on the third and all subsequent rows, sew a new bead through the last one strung in the previous row. Before breaking the thread, pass the needle in a zigzag pattern through the entire weave.

Brick

Although brick weaving is a little reminiscent of mosaic, it is very different in terms of execution technique: it is woven in a different direction and takes longer. Brick and mosaic weaving are similar, so they are often used in one product, and the joints look completely invisible. The principle and order of brick weaving:

The first row consists of 5 beads. First, two pieces are put on the needle, and then a third, after which the needle is threaded through the second towards the weaving, and through the third in the direction of the weaving. Then the fourth bead is put on the needle, and the needle is passed through the third in the direction opposite to the weaving. The same is repeated with the fifth bead, after which you need to return to the beginning, going through each bead in turn and counting down.
The second level of brickwork can be expanded. To do this, you need to string two beads on a needle, make a stitch, clinging to the thread connecting the two beads of the first level, and bring it out through the second bead of the second row. Next, the third bead is put on, and the stitch is made between the second and third beads of the first row. Do the same with the fourth and fifth beads, and when the sixth bead is collected, the needle is inserted from top to bottom through the fifth bead, and out through the fourth bead of the first and second row.
At the third and second levels, the canvas expands in the same way, and starting from the fifth row, it should already be narrowed. To do this, the first two beads are strung, and the stitch is made under the thread connecting beads six and seven in the fourth row, and through the beads two of the fifth row comes back. Next, the needle is guided in the direction of weaving on the fifth row through the first bead, and then through the second. At the fifth level they stop at seven beads and so on.

Circular (French) technique

French weaving is very common among needlewomen. And this is understandable, because all the animals, flowers and other decorations come out airy and openwork. With circular (French) weaving, at the base of any leaf or petal there is a thick central wire rod, on the base of which several beads are strung, and a thinner wire with beads is attached below. Two wires are placed parallel, fastened with one curl. This creates one half of the arc.

On the other side of the rod, another wire with beads is attached, secured to the main rod from below. If you weave a couple more of these arcs, alternating fastening the wire first from below, sometimes from above, you will get a full-fledged leaf. The wire of the last row is fastened with two turns, and its tip is cut off. One side of the axial rod is cut so that a small end of the wire about 0.5 cm remains. Then it should be bent into the inside of the decoration.

Parallel

Many needlewomen begin their journey in beadwork by mastering the technique of parallel weaving. This is the most easy option, flowers and other interesting products. The essence of parallel weaving is that the beads of the first and second rows are strung on one end of the wire, and its other end is threaded towards the first level through the beads of the second.

The two rows are pulled tightly to the middle of the wire or line and pulled tight. After this, both ends of the wire come out from opposite sides of the decoration, and the rows are parallel to each other. This lowering easily creates not only flat products, but also three-dimensional ones. Only when weaving volumetric figures the rows are laid one under the other, and when creating flat rows, they are laid in the same plane.

Master classes on bead weaving for beginners with photos

Decorating items with beads is very fashionable. Today, many Fashion Houses in their numerous models decorate bracelets, bags, rings, and clothing items with beadwork. That's why modern women and are fond of beadwork, because every item created with one’s own hands takes its rightful place in the wardrobe and becomes a source of personal pride. To learn how to create beautiful things using beads, beginning needlewomen will need the following materials and tools:

beads, stones;
clasps for weaving necklaces, bracelets, necklaces;
needles of different sizes for large and small beads;
nylon threads, fishing line or wire for the base of the product;
pencil, squared notebook sheet for sketching diagrams;
scissors.

Before starting practice, a beginner should arrange workplace so that you can enjoy the process and not suffer from inconvenience or lack of lighting. You need to work at a table where everything is prepared necessary tools and material. And so that your eyes don’t get tired, the light should not be too bright, but not too dim. It is better to start weaving with beads with some simple figures or bracelets, and complex jewelry should be left for later, when you have already gained some experience.

Bracelet

Trees

Weaving wood is not as difficult as it might seem to a beginner at first glance. The main thing is to know the step-by-step procedure:

To weave leaves, cut the wire into equal pieces of 80 cm. Take 7 centimeters of green beads for one of them, and then, stepping back from the edge 20 cm, make twists of 3 beads, and then twist the wire in a zigzag.
Make 7 identical branches, then connect the composition. To do this, twist two branches, and after 3 mm add another one. Gradually twisting the finished branches creates a beautiful, branched tree.

To prevent the trunk from looking too thin, it is better to refine it. For this, floral tape is suitable, which should be wrapped around the trunk, gradually wrapping new branches to the base.
At the end of the work, all that remains is to plant the tree on plaster in a pot, and to make it look like a birch, draw brown stripes with a marker that will imitate birch bark.

Rose

A beginner can also weave the simplest rose or violet from beads, the main thing is to strictly follow the instructions. Master class step by step:

Cut one piece of wire 10 cm for the base of the flower, and the other 50 cm, which will become low.
String 5 beads onto the base, and then wind it to the bottom.
Place beads on 2/3 of the wire and form an arc, covering the low axis sequentially.

Make 5 arcs on each side - this will be a rosebud.
Using this principle, make another 5 (or more) petals, and to keep them sharp, they should be wound to the axis at an angle of 45 degrees.

Let's start collecting roses. Bend 3 petals in half horizontally, bending slightly outward.
To avoid the middle from falling apart, the wire should be compressed tightly.
Take a thick wire and insert it between the petals to make the stem stronger. Then, using floss threads, very tightly wrap all the petals in order to the stem.

How to weave a bauble

If you want to present a fashionable and original gift, then the same suitable option- bauble. This jewelry is now popular not only among young people - many respectable people wear a variety of openwork bracelets. We offer a master class on weaving beaded baubles with flowers:

Attach one part of the bracelet lock to a thin fishing line, as in the photo.
String small beads onto 2 pieces of fishing line so that each is 3 cm long.
Thread a transparent bead through both fishing lines (blue in the picture).
Again, string the beads onto each individual piece of fishing line, and then thread both through the white bead - it will become the core of the flower. Unfold the lines and thread each line through the 2 blue beads again.
Using this principle, make all the remaining links so that the end and beginning of the bracelet are the same.

Crocodile Beading

Use your imagination and create fun crafts from beads. We offer a master class for beginners on making a simple crocodile, based on which you can make earrings, a keychain or a bracelet pendant:

String one dark-colored bead onto the wire - this is the nose of our crocodile. Secure it by parallel weaving in the middle of the segment.
With one end of the wire, grab two green beads, pulling them close to your nose, and then insert the second piece of wire into them. After securing it, you will have a second row.

The third row is three green beads, the fourth is four, and in the fifth row you should alternate green beads with beads of a different color - these will be the eyes of the crocodile. Starting from the sixth row, the head narrows.
Once you narrow the head down to three beads, by adding two loops, make legs on the sides.

Beading is a vast field of activity, here you can create completely different products: flat, three-dimensional. This article will tell you what you can quickly and efficiently make from affordable beads at home, And will show you how to do it yourself for beginners.

How can you make a wedding tree from beads with your own hands?

A tree created in the shape of a heart, which can be presented to a couple in love for a wedding or on any occasion. It is made only using beads and wire.

To weave it you will need:

Thin wire;
A coil of thick wire;
Green beads;
Pink beads;
Yellow beads;
Floral green paper;
Fishing line;
Clay;
Heart shape.

Let's start weaving the product:

The first element will be leaves. For them, you need to put fifteen green beads on the wire and twist them into a loop, twisting the wire four turns, placing them in the middle. Then we collect fifteen more beads of the same color on both ends and again form loops by twisting the wire. Here are three leaves ready. And below we collect eighteen beads on both sides and again form loops. Now the first branch is ready. You need to make fourteen of these branches.
We begin to weave the main part - roses. Here we will use beads Pink colour. We make fifteen loops of fifteen beads each, but they must touch one point, then they need to be pressed together to make a flower. We flatten each loop separately a little on top and you get a beautiful rose. There are only seven of them you need to make.
We tie a couple of branches with leaves to each small rose using wire. In this case, we do not cut the wire, but leave long ends.
We create a heart from thick wire using bends and make a support at the bottom so that it can stand.
We wrap the entire outline with floral paper and attach the flowers, distributing them evenly.
The final element can be made from either fishing line or thin wire. To do this, we collect five green beads and twist them into a loop (you will need to make a couple of knots with the fishing line). And we make small sections of five such loops.
Then we attach these green branches to the heart, between all the flowers so that they completely cover the space between them.
Now we leave the product alone and proceed to the stand. Pour clay into a special heart shape, no more than ten centimeters, and wait until it hardens a little, that is, about ten minutes. Then we immerse our product exactly in the center and let it harden completely. After complete hardening, carefully remove the entire structure and, if desired, you can decorate it at the bottom using paints and leftover beads.

The result is such a beautiful product that fascinates with its beauty.

You can also string a large number of white beads onto a wire or fishing line, evenly placing large or medium beads between them, and process the completed composition, wrapping it around the contour and passing between the flowers. And also glue cream-colored beads along the contour of the stand.

Trying to make a little bird in a master class

An excellent cute product that can be used both as a keychain and just a souvenir.

For weaving you will need:

Wire;
Yellow beads;
Pink beads;
Black beads;
White beads;
Blue beads.

We begin weaving the product.

The bird can be made in parallel weaving according to the following pattern:

Or as described below:

We start weaving from the beak. It consists of six black beads and six rows (that is, one bead per row). The rows are made by crossing the two ends of the wire crosswise, passing through the beads.
We line up further rows in this way: yellow with blue on top, and all the rest below.
First row: three yellow and three pink.
Second row: white, three yellow, white and four pink.
Third row: white, black, three yellow, black, white and five pink.
Fourth row: nine yellow and pink, four white, pink.
Fifth row: seven yellow and eight white.
Sixth row: a pair of yellows, a blue, a pair of yellows and nine whites.
Seventh row: a pair of yellows, a pair of blues, a pair of yellows and nine whites.
Eighth row: a pair of yellows, three blues, a pair of yellows and ten whites.
Ninth row: a pair of yellows, three blues, a pair of yellows and eleven whites.
Tenth row: a pair of yellows, a pair of blues, a pair of yellows and ten whites.
Eleventh row: two yellow, blue, two yellow and eight white.
Twelfth row: four yellow and six white.
Thirteenth row: three yellow and four white.
The fourteenth row consists of one yellow and a tail: four lines of eight beads each, as shown in the diagram.
Now let's make the wings. Six blue lines of ten, nine, eight, six and the last two of five beads each. Then we take the yellow color and continue along the rows, in the following number of beads: 1-2-3-4. We thread the ends of the wire into the sixth and seventh rows from the top.

The beautiful bird is ready, and the result can be seen in the photo, along with the diagram.

Check out some more figure diagrams:

Video selection on the topic of the article

And a bit more simple products in the video selection:

You can weave a lot of useful things from beads that will decorate your home. We invite you to take a look at the master classes and learn how to make handmade beadwork for beginners, such as flowers and trees.

Making a flower

So, let's look at what types of products can be used for any purpose: for making bouquets, as decoration, hair clips, brooches, and so on.

We present to your attention a master class on how to make a flower:

The flower is ready!

Second assembly method

Using the same type of spiral petal, you can get completely different beadwork. An example photo can be seen below.

Make a lot of petals, just do not cut the ends of the wire, but twist them. Then weave them together in pairs. After this, twist all the stems together. Leave the flower as is or unfold the petals. If you want to use the craft as a decoration, then roll the wire and stick a piece of fabric on top.

Pot of pansies

Assembling a bead product (diagrams)

Flowers need to be collected as follows:

The craft is ready!

Create a beautiful rose

It's very easy to do:

The beaded rose is ready!

Beadwork: trees

To make such a tree, no special beading skills are required. But the work itself is quite painstaking and time-consuming. Therefore, you will need calm, attentiveness and self-confidence.

We present to your attention a master class on how to make trees:

By performing these simple steps, you can create not just a masterpiece from beads, but also an entire composition.

White tree

To make this craft, you will need thin white wire.

You can glue such a tree to a stand or place it in a pot or container, covering the “roots” with decorative pebbles. By creating several of these crafts, you can add a special twist to the interior of the room.

If you use multi-colored beads when weaving a tree, you will get a New Year's craft.
Weave a flower, wrap the wire a couple of times, and bite off the excess. Glue a piece of fabric on top of the fishing line. Take a hairpin or brooch and remove the decor. Glue your beaded flower onto the blank. You will get a homemade brooch or hair clip.
A small flower can be glued to various jewelry, then you will have an original decoration self made. And if you make two identical crafts and attach a special hook, you will get summer earrings.