Knitted bolero for girls. Knitting an openwork bolero

This beautiful bolero is knitted. The patterns of this bolero are based on various elastic bands. The description is for sizes from 4 to 10 years. This vest is perfect for warm spring and cold summer evenings.
Vest size 110 (122) 134 cm.

ORANGE KNOTTED BOLERO FOR A GIRL

Size: a) 2 years – b) 4 years – c) 6 years – e) 8 years – f) 10 years.

For 3 years
Knitting materials: Nahih yarn (65% merino wool, 10% silk, 15% polyamide, 10% cashmere, 1500 m/100 g) - 70 g thistle color, knitting needles No. 3 and hook No. 1.9.

Openwork pattern: knit according to pattern 1, which shows the faces. and out. rows.

Purl stitch: persons rows - purl. p., out. rows - persons. P.

Knitting density: openwork pattern - 27 stitches x 37 rows = 10 x 10 cm.

Attention! Knit with thread in 3 folds.

Center back: Cast on 25 sts on needles.

Distribute them as follows: edge, 3 p. satin stitch, 17 p. openwork pattern, 3 p. purl. iron, chrome Knit straight until the length of the central part is 27 cm = 10 repeats. Close the hinges.

Left side and sleeve: On the left edge of the central part, dial 69 sts. Distribute them as follows: chrome. p., 1 p. satin stitch, 65 p. openwork pattern, 1 p. purl. iron, chrome Knit straight 12 cm.

Right side and sleeve: knit symmetrically.

Assembly: sew the seams of the sleeves. Crochet the edges of the sleeves and the edge of the product in a circle openwork border according to scheme 2.

Enlarges when pressed

Turquoise bolero - cape

A children's cape is knitted using a fancy pattern from wool yarn turquoise color. It takes very little time to knit such a cape, but you will wear it for several years.

Size: 6-9 months

You will need: 50 g turquoise wool, knitting needles No. 2, 1 m ribbon white 1 cm wide, 6 buttons.

Patterns

Pattern 1 - elastic 1 x 1

Pattern 2 - garter stitch $CUT$

Pattern 3 - knit a fantasy pattern according to the pattern

Pattern 4 - stockinette stitch

Pattern 5 - 1st and 3rd rows - knit. loops, 2nd row and all even rows - purl. loops, 5th row - 2 knit loops, * yarn over, 2 knit loops together, * yo, 3 knit loops, 7th and 9th rows - knit. loops.

Knitting density in pattern 3: 21 loops and 30 rows = 7 x 7 cm

Description of work

Start with the neckline. To do this, cast on 103 stitches on the needles and knit 12 rows with pattern 1, starting the 1st row from the faces. loops. Next, knit as follows: 10 loops with pattern 2, then 83 loops with pattern 3, 10 loops with pattern 2. The first and last 10 loops are a placket that is knitted in garter stitch throughout the entire knitting. In the center of the last 10 loops of the placket, make 6 buttonholes: the 1st loop in the 7th row, the rest every 16 rows.

When knitting pattern 3, start according to the pattern. The 1st row of the pattern corresponds to the last row of the elastic. Knit the first motif up to arrow A (= 6 stitches), then knit the pattern between arrows A and B 8 times (= 64 loops) and finish from arrow B to the beginning of the bar (= 13 loops). At the beginning of the corners openwork knitting 2 loops are added: yarn over in the center of the motif, then add 1 loop from the broach (knitting it crossed). K1, then yarn over again. As a result, out of the added 3 loops, 2 loops remain due to the knitted broach. In the remaining rows of the motif, each added loop is knitted with a simple broach or 2 loops together. and does not create an increase.

The first additions are made in the 7th row and every 8th row when the motifs begin (according to the diagram). All openwork corners do not have the same side height, although they start every 8th row: the 1st corner consists of 6 rows, the 2nd corner - of 8 rows, the 3rd corner - of 10 rows. The last corner begins in the 71st row and is knitted completely openwork. With the beginning of this angle we have already added 180 loops (= 283 loops). Having knitted 94 rows according to the pattern, we divide the knitting into sleeves and a back with shelves.

Sleeves

To do this, leave the first 38 stitches on the auxiliary needle and knit. 1st sleeve on the next 77 loops, adding 1st loop at the beginning and end of the row (3 motifs were selected excluding edge loops). On these 79 loops, knit 10 rows with pattern 5. Cast off all loops. Transfer to secondary knitting needle 53 back loops and knit the second sleeve on the next 77 loops in the same way as the first, adding 1 loop on both sides. Sew the sleeves.

Torso

Transfer the loops of the first shelf, back and second shelf onto one knitting needle. Knit faces. row as follows: 38 knit stitches, knit 2 loops from the edge of the sleeves, 53 knit loops, knit 2 loops from the edge of the sleeves, 38 knit loops. (= 133 loops). Knit 10 rows on all these loops with pattern 2. Cast off the loops.

Assembly

Fold the sleeve strips along the fold line and sew them from the inside with a blind seam. Fold the neck of the tank in half and sew it with a hidden seam too. Pull the tape into the resulting hole in the neck. Sew buttons.

Excellent madel for a girl ages from 3 years to 10 years. At knitting this children's jacket soft and delicate yarn from merino wool.

Age, years: 3-4, 4-5, 6-7, 8-9, 9-10.

Measurements:

Chest circumference: 78 (82, 86, 91, 96) cm.
Length to shoulder: 28 (30, 31, 33, 35) cm.
Sleeve length (with folded cuff): 22 (25, 28, 30, 36) cm.

Materials:

5 (6, 7, 7, 8) skeins of “Cashmerino aran” yarn from Debbie Bliss (50 g/90 m, 55% merino wool, 33% microfiber, 12% cashmere)
Knitting needles 4.5 and 5 mm.
Circular knitting needles 4.5 and 5 mm.

Work density:

18 p. and 24 r. = 10 cm stockinette stitch, needles 5 mm.

Little ladies love to change their outfits no less than their mothers. My daughters' wardrobe is becoming more and more diverse. They love dresses, and on top, so as not to spoil all the charm, a bolero, which is very easy to knit, is best suited.

I knitted a grass bolero for my daughters. All its beauty lies in the yarn, which means there is no need to invent complex pattern. It knits very quickly and even a novice craftswoman can handle it.

For knitting you will need:

Grass yarn (you can take any brand, mine is inexpensive)

Knitting needles (preferably circular, as the product turns out to be quite large)

Markers to see where raglan increases are made; colored paper clips can be used instead

Pins for leaving sleeve loops

I knitted the bolero with raglan on top. I like this way of creating things because there is no need to sew the parts together later. Another plus is that you can always try on a future product on a model.

We start knitting with a sample. This is necessary in order to correctly calculate the required number of loops for casting on.

I knit a small sample. I cast on 20 loops and knit about 10 rows, the length is 9 cm.

Now you need to calculate how many loops to cast on for the bolero. To do this, you need to measure the circumference of your neck, I got 28 cm, which means I need to cast on 62 loops and 2 more edge loops.

Next, I immediately consider how to distribute the loops. From 62 we subtract 8 loops, these are raglan loops. There are 54 left, we divide them into three parts: back, front, sleeves. It turns out that there are 18 loops on the back, 9 on the sleeves and each front.

The calculations have been made, let's start knitting.

A little more digression. I want to talk about the knitting needles. Of course, you can also knit on straight lines, since the product is not circular. But it is knitted in one piece, which means it will be quite voluminous and easier to knit on circular needles. I have them on cables, they don’t get twisted, in general, knitting with them is a real pleasure.

I knitted stockinette stitch. The front rows are knit stitches, the purl rows are purl stitches.

Now let's start knitting. We cast on the required number of loops and place markers in the first row. I marked two loops each. This means that in each front row we make a yarn over before and after the marker. In purl rows we knit yarn overs purlwise.

So we continue to knit the required length to the sleeves. I usually try on children’s clothes, it’s easier to navigate. I knitted 16 cm.

Next, we need to remove the loops onto the pin in order to continue the sleeves in the future. You can close them if you want a sleeveless bolero.

We continue knitting the back, also leaving loops for the second sleeve.
Continue knitting to the desired length. I knitted 23cm.

Next, close the loops and begin knitting the sleeves. I knitted with knit stitches in the round.

Women who know how to knit will undoubtedly achieve a lot in life. After all, the products self made are now highly valued and expensive. And how nice it is when you can knit almost any thing yourself. Boleros are now very firmly entrenched in fashion. Such a light cape goes with any dress, and if you also decorate it with beads, it will turn out unique item. If a beginner is a little familiar with the specifics of working with knitting needles, then the article will cover the topic of how to knit a bolero with knitting needles; diagrams and descriptions are attached.

Knitting bolero

The bolero is easy to knit and looks simply chic. Knitting a bolero is exciting activity for a woman where she can show her individuality and creativity. Adult models look very beautiful on dresses and blouses, adding extravagance to the image. But not only mothers want to be beautiful, little daughters also love to be fashionable. Knitting a bolero for a girl with knitting needles is very easy and quick. For a little princess, such a gift will be the best; she will be fabulously beautiful in such a dress.

Knitting pattern

For such a delicate and small thing you will need very little thread, the color of which can be any, and number three knitting needles.

You need to knit a bolero from the back. To begin, make seventy-five stitches. You need to knit as many as three rows with purl stitches. From the very edge, step back four loops and knit with stockinette stitch. You need to add a loop six times in every eighth row. Knit until you get about fifteen centimeters. Now close off three loops on both sides twice from the very beginning of the row. This is necessary to create a small opening. We make the neck when the height is about twenty-seven centimeters. And you can get it like this: in the center you need to close thirty-eight loops. Next, each part is knitted separately. We do this for two rows. Now you need to close the neck: four loops on both sides along the edge. If everything was done correctly, then only twelve loops should remain, they also need to be closed.

The second part of the work is to create the right shelf. Just knit two loops with front loops for three rows, and then do the same with a wrong-side loop. Add fifteen stitches from the edge every other row. This should be done on the right side, retreating three loops. Then on every fourth row and on every second row five times a loop. Do the left side in this way. Knit six stitches for the armhole in purl rows to a height of fifteen centimeters, then one at a time, and lastly two. To create a neck, you need to close four loops on the right in the second row. There should be twelve loops left at a height of twenty-eight centimeters. This is how the left shelf is created.

To create sleeves, cast on sixty-six stitches onto a knitting needle and knit two rows on the wrong side, also with the face. Then three loops are closed on both sides, then two times three and twelve times in a loop. There should be twelve loops left, and they are also closed.

All parts of the bolero were made with great love for needlework. The cape remains to be connected. You need to start from the shoulders. Carefully connect all the parts, hide any irregularities. Fasten the sleeves. To prevent the cape from falling off, you need to come up with a tie. To do this, you need to cut threads fifty-five centimeters long, make six such threads. Gather three threads and create small knots at the ends. All that remains is to attach the ties to the resulting product.

As a result of such interesting and entertaining work, a wonderful bolero for a girl came out. The little fashionista will really treasure this gift!

Amazing thing

In this interesting article you learned how to knit a bolero with knitting needles. For a general understanding of the significance of such an interesting thing, you need to know everything about it. Such a pretty cape came to us from the Spaniards. Previously, it was a mandatory attribute of a bullfighter's costume. A long time ago, the bolero looked like a very short jacket without buttons, sleeves or ties. Much later, Europeans came to appreciate this interesting thing wardrobe It has been slightly transformed and improved. Now there are a lot of different additives to such jackets. We added a collar and sleeves, pockets and ties. The fabric used to create them is very different: jeans, knitwear, cotton. Many craftswomen know how to knit such openwork boleros with knitting needles and hooks. Refined decoration also appeared, decorations made of beads, ruffles, and ribbons were added. Many women and girls appreciated such a practical and beautiful thing. Now bolero is in every women's wardrobe.

Video on the topic of the article

The bolero perfectly helps little fashionistas solve the issue of regularly changing looks and styles, because the same thing will look completely different in a duet with two different models bolero. Not to mention, these beautiful capes not only decorate, but also protect from the chill in the off-season.

Modern bolero models have long gone beyond their classic look: from the upper part of the Spanish national costume they were transformed into a purely female mandatory attribute of the wardrobe. Now the cuts of these jackets can vary: be elongated; similar to vests; have absolutely incredible patterns or be the very simplicity and ease.

The choice of bolero models for women and girls is large, but most of them can be created with your own hands if you find suitable schemes with descriptions of knitting or crocheting. In this article we will pay special attention to crocheting jackets for girls.

Pattern and description of crocheting a bolero for a girl

Crocheting a bolero is a pleasure, because there are a huge number of models for this product: for summer or winter; openwork or dense; short or long; with or without fasteners, sleeves, collars, yokes. These knitted jackets look good with most outfits - both casual and formal. And when combined with other products made in the same style, boleros on girls look very interesting and stylish.

A simple model for beginners

Let's start by creating a simple crocheted bolero for a girl - knitting for beginners will be accessible thanks to step-by-step photographs. This article will be useful for those who want to try their hand, but are not confident in their knowledge. Beginning knitters will be able to crochet a bolero for a girl if they use detailed master class with step-by-step photographs of the work.

Popular articles:

Bolero size for girls:

for 5-6 years, height 116.

Materials for work:

Pekhorka yarn “Children's cotton” (330 m/100 g) - 150 g;
hook No. 2.5;
satin ribbon in tone, 0.5 cm wide, about 2.5 - 3 meters.

You can use any yarn of similar thickness, but to get an insulated version of the bolero, it is better to take wool blend yarn.

Back knitting pattern:

Important: the final result of knitting a product may differ from that presented depending on the density of the knitting, the manufacturer of hooks and knitting needles, so it is important to compare your product not only with the attached description, but also with the size of the pattern.

Knitting back

We collect a chain of 82 air loops + 3 air loops lifting and knitting according to the given pattern starting with 1 air loop. The first row consists of alternating double crochets (DC) with chain loops (VP). It should be 34 cm long. We knit the second row according to the pattern: 4 chain loops, 5 double crochets. Work 2 chain stitches of the pattern and knit 4 stitches of the bottom row (skip 1 double crochet, see bottom row) 3 double crochets in one loop.

Perform 2 chain stitches of the pattern again. The first report of the pattern is completed. Next are 5 “intermediate” columns. Let's look at the diagram. We knit the third row according to the pattern, with 3 stitches knitted in one loop now knitted together. It turns out to be a “diamond”. We knit a row of double crochets/1 chain stitch.

In the next row we shift the pattern by half of the report in a checkerboard pattern (see pattern diagram). Then we knit the 6th row of “diamonds”. Next, we knit the pattern according to the pattern until we reach a back height of 8 cm (at the same time, we control the width of the product 34 cm: we lay the product out a little stretched so that the width is 34 cm, then measure the height). You can close the loops for the armhole simply by applying the product to the drawn one. life size pattern or do it according to the attached diagram.

Bolero pattern for girls.

Next, three loops are knitted to close the armhole. We make 3 lifting chain stitches, replacing the first double crochet in the diamond pattern. Then you need to knit according to the pattern. Without knitting 3 loops to the end of the pattern, we knit 2 double crochets in a row at the end of the row. In the next row you need to close one loop on each side. To do this, 3 air loops are knitted and immediately after them a double crochet is knitted, thereby closing 1 air loop located between the double crochets. We knit a row according to the pattern, closing 1 loop on the other side (according to the diagram). At this point the armhole cutout is ready.

Next, you need to knit straight along the pattern until the height of the product reaches 21 cm. Fasten the thread, leaving a longer end for sewing the shoulder seam (I can’t specify about 50 cm, it’s better to leave a little more). Knitting the back is now complete.

Knitting flowers and sleeves

Wrap the thread on your finger once and knit 1 chain stitch and 1 single crochet into the resulting ring. This will be the beginning of the row. Work 10 chain stitches and work a single crochet into the ring. The result is a basis for knitting a petal. Make 6 such rings for the petals, ending the last chain with a connecting loop in the first single crochet.

We make the petal according to the pattern: 3 single crochets, 5 single crochets, 2 chain stitches, 5 single crochets, 3 single crochets. We repeat the pattern for all six petals. We close the row with a connecting loop, pull the thread to the wrong side and cut it leaving 8-10 cm. We pull the middle of the flower by the first end of the thread and tie the tails of the threads together. The first flower is ready. Next we will knit flowers, connecting them into a bar of 5 motifs during the knitting process.

We complete the first row of the flower (the first paragraph of the subparagraph). Next, we tie the first petal completely and the second one until the air loops begin.

We make one air loop, put the first flower on the hook with the front side facing us behind the arch of 2 air loops, perform the second air loop, thereby connecting 2 flowers at the tops of the petals. We complete the tying of the second petal.

Tie the third petal to the middle and connect it with the next petal of the first flower. Finish knitting all the petals of the second flower. Knit a bar of 5 flower motifs in this way, connecting them together by 2 opposite petals. One free petal remains at the edges.

Then you should make the same bar for the second shelf (another row of 5 connected colors). Right shelf strapping diagram:

Tying motifs 1 row. Let's start the binding from the leftmost motif. Insert a hook into the arch of 2 air loops of the third free petal (counting from below, from right to left, see photo and diagram) and knit 2 single crochets. We tie the motifs carefully following the diagram. Knitting goes in a circle counterclockwise. We complete the row with a connecting stitch in the first single crochet.

Left shelf strapping diagram:

We perform the tying of the left shelf in the same way, starting from the third petal, but starting from the rightmost motif. Let's do the first one circular row strapping. Next, we knit according to the pattern only along the inner edge of the shelf. The result is 3 finished bolero parts. Immediately sew the side and shoulder seams to see how the bolero will fit on the child and to make it easier to control the required sleeve length and armhole depth. We perform the first row of tying the edge of the product according to the pattern (single crochet, 4 chain stitches, single crochet into the next double crochet of the previous row, the bottom and neck are tied through a stitch, see photo and diagram).

The second row of tying the edge of the product is a shell made of 4 double crochets in a single crochet of the previous row and a connecting loop in an arch of 4 chain loops of the previous row. In the corners of the neck, instead of a shell of 4 double crochets, you should make 1 double crochet so that the neck lies evenly and does not turn out to be a stand-up collar.

We begin knitting the sleeves by making 3 floral motifs, connecting them into a ring during the knitting process.

How to tie a sleeve according to the diagram in step-by-step photographs:

Please note that in this bolero model the length of the sleeve reaches the phalanges of the fingers and thumb is pushed into the floral motif. If you want to get a classic sleeve, shorten the knitting of the main pattern by the required number of centimeters (5-6 rows - put the vest and sleeve on the child, and attach the edge of the sleeve to the edge of the armhole side seam). At this stage it ends circular knitting and then we will knit in turning rows, casting off 1 loop on each side in each row. So we knit 7 rows, decreasing 1 loop on each side in each row. The total length of the sleeve is 41 cm, not counting the sleeve binding, which is performed in the following paragraphs. Sleeve width is 11 cm (total girth 22 cm). We tie the bottom of the sleeve according to the pattern above.

The finished bolero must be lightly steamed from the reverse side in the “cotton” mode, but do not press the iron, hold it slightly over the canopy so that the product retains its knitted texture. You can also steam the product through gauze cloth or a white diaper. We thread it into the edge of the product between the shells satin ribbon, tie it with a knot, and then with another knot across the edge of the bar so that the ribbon “sits in place” when tying the bolero. We also thread the ribbon through the sleeves.

Beautiful product for a 3 year old girl

To please your little one with a new thing, you can make a little effort and knit such a beautiful jacket with your own hands. Let's take a closer look at how to crochet a bolero for a 3-year-old girl with descriptions and diagrams. This product can also be suitable for a 3.5 year old baby.

Materials for work:

100 g of baked milk colored thread (92% acrylic, 8% metallic) 400 m / 100 g;
hook No. 3;
matching button.

Schemes of work:

Crochet bolero pattern.

Before work:

Before you start creating a bolero, you need to make a pattern in full size taking into account the individual parameters and measurements of the girl for whom the bolero is intended. Next, you need to knit and steam a 10 x 10 cm sample with the main pattern for preliminary calculation of the loops.

Progress:

We will knit the bolero from bottom to top in one fabric. We collect the required number of v.p.

First r. 3 vp, 3 tbsp. s/n, *1 vp, skip 1 loop, then knit 4 tbsp. s/n*, continue from * to the end of the row. Finish row st. s/n.

Second r. Knit the entire row with arches of 5 ch, securing with 1 tbsp. b/n in 1 v.p. first row

Third r. We knit similarly to the second with arches of 5 vp, fasten them with 1 tbsp. b/n in the middle of the arches of the second row. But you need to start with 3 v.p.p. and finish 1 tbsp. s/n.

Fourth r. 3 vp, we knit arches from 4 vp, fasten them with st. b/n in the middle of the arches of the third row. Thanks to the fact that we started and finished the third row higher, the fourth row will be even for knitting the fifth row.

Fifth r. knitted similarly to the first one. In every 4 vp. we knit st. s/n, and above st. b/n we knit 1 ch.

For the pattern we repeat knitting 4 rows.

When the first 4 rows are knitted, you need to further knit the next 13 rows with increases according to the second pattern, then knit 8 rows without increases or decreases. Next you need to divide the canvas into 5 parts. On the pattern we indicate 19 cm for the right and left front front, 10 cm for the armhole and 20 cm for the back. Your numbers may be slightly different depending on the girl’s individual parameters. Markings can be made with a thread of a contrasting color, a pin, or a special plastic marker, which can be purchased at a craft store.

Shelves

Knitting openwork pattern. We decrease the loops along the outer edge in accordance with the pattern and the first diagram, which shows how to evenly decrease the loops. The height will be approximately 23 rows.

Back

We knit straight without increases or decreases to a height of 23 rows.

Sleeves

You need to attach a thread to the 4th row of the back, knit 35 vp. and secure it to the shelf. Now we need to knit 8 rows with a pattern without increases or decreases on these 35 vp. Then you need to knit decreases according to the first pattern until the end of the sleeve.

Sew shoulder seams and sleeves.

Now we tie the entire bolero along the front side as follows (see third diagram):

First r.*2 tbsp. s/n, skip 1 loop, 1 ch* continue from * to the end.

Second r.*2 tbsp. b/n, pico*. Continue to the end.

Now according to the fourth scheme tie a button :

First r. In a ring of 3 ch. knit 6 tbsp. b/n.

Second r. The number of loops must be doubled. We knit 2 tbsp into each. b/n.

Third r. Double the loops in every second stitch.

Fourth r. Double stitches in every third stitch.

Then we knit by analogy until the diameter of the circle reaches the diameter of the button. Now you need to attach the button to the wrong side of the circle. Knit 1 row without increases, and then knit rows with symmetrical decreases in stitches. Pull a thread through the last 6 loops and tighten tightly.

Sew a button on the openwork strip. Arch of 5 v.p. on the opposite shelf it will serve as a loop. The bolero is ready.

Knitting an openwork bolero

If we talk about methods of knitting bolero patterns, then we cannot fail to mention short jackets for girls. In combination with long sleeves, the product looks very romantic. Let's look at how to crochet a similar openwork bolero for a 4-5 year old girl.

Dimensions of the finished bolero:

Length - 20 cm; width - 26 cm; sleeve length - 23 cm.

Materials for work:

1 skein yarn YarnArt IBIZA (60% viscose - 40% acrylic; 100g – 550m);
hook number 3.

Knitting patterns:

Knitting pattern for the main bolero pattern.

Knitting pattern for bolero sleeves.

Progress:

We cast on the required number of air loops, a multiple of ten.

First, the back is knitted with the main pattern according to pattern 1, knitting seven centimeters, we shorten small armholes for the sleeves, about a couple of centimeters each (armhole height 13 centimeters). After knitting another ten centimeters, you need to make a cutout for the neckline and knit another three centimeters.

Then we knit the two front panels. We cast on the required number of loops, knit about eight centimeters and begin to shorten a little with each row, for a smooth neckline. We knit the second shelf in the mirror image of the first.

When all the parts are connected, they should be sewn. First the top seams, then the side seams.

The sleeve is knitted separately and sewn or crocheted, which allows the product to stretch and hold perfect shape. First, 12 centimeters of sleeve are knitted, then cut to fit the armhole and sewn on. After this, we knit the sleeve with another pattern according to pattern 2. First we knit from the first to the fifth row, and then repeat from the second to the fifth.

Master class on creating a summer bolero

It would be a great idea to crochet a summer bolero for a girl, because this versatile item will diversify the wardrobe of a little fashionista. A master class on crocheting a bolero for a girl with diagrams and descriptions will help you with this. This bolero is suitable for girls 5-6 years old.

Bolero size:

Materials for work:

hook No. 1.5;
yarn - DIVA 100% microfiber acrylic (350 m, 100 g) Pink colour- 200 g., purple- 100 g;
tape - 1 m.

Knitting pattern

Progress

First we knit the back, then the front and sleeves.
Back: knit a chain of 89 chain stitches and knit 15 r. Next, for the armholes, decrease the loops on both sides in the next five rows according to the diagram (73 loops). Continue knitting another 7 rows. (27 rows in total).

Right shelf:

Knit a chain of 13 chain stitches. Next, knit 15 rows, gradually adding loops in each row on the right side of the loop. Then, on the left side, decrease the loops for the armhole and at the same time decrease on the right side to cut the neckline according to the diagram. After knitting 12 rows, finish knitting (10 loops).

Left shelf:

Knit symmetrically on the right front.

Sleeves:

Knit a chain of 49 chain stitches, knit according to the pattern (for a bolero with long sleeves - 15 r., with short sleeve- 11 rows). Next, decrease the loops according to the diagram in six rows. Finish knitting (13 loops).
Tie the sleeves and back according to the pattern with purple threads. Wash and sew parts of the product.

Bolero decoration:

Tie flowers. We got 17 flowers that need to be connected together.
Tie the right one and left shelf, back neck according to the diagram.
Sew a ribbon of flowers to the front and back neckline. The bolero can be decorated as you wish, for example, by knitting small flowers of a different color.

Video lesson

To make it easier for beginner knitters to understand the peculiarities of the process of crocheting a children's bolero, before starting work, it is worth watching several detailed video master classes from professional needlewomen.

Video “crocheted bolero for girls”

Dimensions: 98/104,110/116 and 128/134.

You will need: for model A: 300 (400/400) g white (col. 00002): for model B: 200 (300/300) g light gray (col. 00011) Schachenmayr Trachten-wolle yarn (63% wool, 37% polyacrylic .185 m/100 g); knitting needles No. 3 and No. 4; matching brooch.

Hole Pattern: cast on 7 sts and knit as follows:

1st day: chrome, knit 2, 1 yarn over, 2 stitches together, knit 2, 2 yarn overs, knit 1, chrome.

2nd row: chrome, knit 1, knit the 1st yarn over, knit the 2nd yarn over, knit 2, 1 yarn over, 2 sts together, knit.

3rd row: chrome, knit 2, 1 yarn over, knit 2 together, knit 3, chrome.

4th row: close 2 stitches, knit 3. (there will be 4 stitches on the right needle), 1 yarn over, 2 stitches together, knit., chrome. = 7 p. Repeat from 1st to 4th p.

Main pattern: odd number of loops.

1st r. (persons): chrome, *1 purl, 1 person. cross, repeat from *, purl 1, chrome. 2nd row: persons, p. Repeat 1st and 2nd p.

Attention: With all decreases and additions of loops, make sure that the pattern does not shift.

Knitting density. Basic pattern, knitting needles No. 4: 19 sts and 27 r. = 10 x 10 cm; pattern with holes: 7 p. = 4 cm.

Back: On needles No. 4, with a thread of the corresponding color, cast on 67 (75/83) sts and knit with the main pattern. After 15 (16/17) cm from the cast-on edge for the armholes, close 1 x 3 sts on both sides (1 x 4 sts/1 x 5 sts), then in every 2nd p. 1 x 2 p. and 1 x 1 p. (2 x 1 p./ 3 x 1 p.) = 55 (59/63) p. At a height of 30 (32/34) cm from the cast-on edge for shoulder bevels, close with both sides: 1 x 4 p. (1 x 5 p. / 1 x 6 p.), then in every 2nd p. 2 x 6 p., bind off the remaining 23 (25/27) p. neck. Total back height = 32 (34/36) cm.

Left shelf: On needles No. 4, cast on 5 stitches and knit with the main pattern. To bevel the shelf from the left edge of the work, dial again or add in every 2nd r. 10 x 2 p. (13 x 2 p./15 x 2 p.) and 8 x 1 p. (6 x 1 p./6x1 p.) = 33 (37/41) p. After 15 (16/17 ) cm from the cast-on edge

From the right edge of the work, make an armhole, as for the back. At the same time, after 17 (18/19) cm from the cast-on edge for the neckline, close 1 x 1 p. from the left edge, then in every 2nd p. 3 x 1 p. (3 x 1 p. / 4 x 1 p.) and in every 4th r. 7 x 1 p. (8 x 1 p. / 8 x 1 p.) At a height of 30 (32/34) cm from the cast-on edge, bevel the shoulder from the right edge, as on the back.

Right shelf: knit symmetrically.

Long sleeves: On needles No. 4 with white thread, cast on 35 (37/41) sts and knit with the main pattern, for sleeve bevels adding on both sides every 8th p. 7 x 1 p. (8 x 1 p. / 9 x 1 p.) = 49 (53/59) p. After 24 (26/28) cm from the cast-on edge for the sleeve roll, close 1 x 2 p. on both sides. (1 x 3 p. / 1 x 3 p.), then in every 2nd r. 1 x 2 p., 5 x 1 p. (8 x 1 p. / 11 x 1 p.) and 4 x 2 p. (3 x 2 p. / 3 x 2 p.), bind off the remaining 15 p. General sleeve height = 32 (36/40) cm.

Short sleeves: On needles No. 4 with a light gray thread, cast on 45 (49/53) sts and knit with the main pattern. After 5 cm from the cast-on edge, make a sleeve roll, as for long sleeve, bind off the remaining 11 (11/9) sts. Total sleeve height = 13 (15/17) cm.

Assembly: complete all seams and sew in sleeves. For the bolero border, cast on 7 stitches on needles No. 3 and knit in a pattern with holes. 120 (140/155) cm from the cast-on edge, after the 4th r. rapport (to measure, slightly stretch the bar in length - the border should go around the entire bolero), close the loops. Sew the straight edge of the strap to the bolero, starting and ending the work at the middle of the back neckline. Sew the cast-on and closed edges of the border strip. For the long sleeve placket, cast on 7 stitches using needles No. 3 with white thread and knit in a pattern with holes. 17 (19/20) cm from the cast-on edge, after the 4th r. Close the repeat loop. Do the second plank in the same way. Sew the trims to the sleeves, sew the cast-on and closed edges.