Christmas decoration champagne Christmas tree. Christmas tree from a bottle of champagne (mk with photo) - LyubavaR

Necessary materials:

• skein of satin ribbon;
• a skein of brocade ribbon;
• lace fabric;
• glue;
• scissors;
• decorative beads and feathers.

Manufacture:

First, decorate the upper tier of the bottle. To do this, wrap the base of the neck with a bright satin ribbon, measure out the desired length and cut the ribbon. Put a few drops of glue on the tape and glue it to the bottle as shown in the photo.

In a similar way we glue another 3-4 rows of tapes. Try to work carefully so that there are no wrinkles on the tapes, and the joints are at the same level. The next two layers are made of shiny brocade ribbon.

Now we turn to the design of the bottom of the bottle. At the very base of the glass container, glue the brocade tape so that the seam is at the back. Next, we cut the satin ribbon into 7-8 equal length strips and glue them to the bottle with tension, applying one layer to another. Cover the back seam with the same tape.

In the place where the upper part of the ribbon decor meets the bottom, glue a wide lace ribbon to the tone of the composition to hide all the flaws. We stick a beautiful feather into it. Glue a decorative bow with beads or a flower made of fabric or corrugated paper into the center of the bottle.

Christmas tree from a bottle of champagne and chocolates

Necessary materials:

• sweets in shiny packaging;
• thick tinsel;
• hot glue gun;
• decorative bow and beads for decorating the Christmas tree.

Manufacture:

First, wrap a bottle of champagne with green tinsel. Winding tinsel should be done in a spiral, moving from the neck to the base of the bottle. Glue tinsel on hot glue. Now we proceed to the decor of the resulting New Year tree. To do this, grease each candy with glue, and then attach it to the bottle, slightly spreading the tinsel. The sweet present is ready, it remains only to glue a decorative bow to the top and decorate the tree with beads.

New Year tree from a bottle of champagne

Materials needed:

• thick green corrugated paper;
• scotch;
• glue gun;
• golden ribbon;
• any decorative elements (artificial flowers, bells, beads, cones, etc.).

Manufacture:

From corrugated paper we cut two sheets - one for the neck, the second for the rest of the bottle. Carefully wrap the container in paper, fixing the wrapper with transparent tape. Next, wrap the bottle with a thin golden ribbon, carefully wrapping it in a spiral.

The last step is to make a decor for the resulting New Year tree. To do this, we create a beautiful composition from any materials at hand: Christmas toys, bells, painted cones, artificial flowers, beads, sweets in a bright wrapper, etc. The main thing is that the elements used in the decor are combined with the overall color scheme of the craft. A bottle of champagne decorated in this way will be a great option for a New Year's gift to relatives and friends.

Sparkling champagne bottle decoration

Necessary materials:

• glue;
• several packs of sequins;
• decorative elements.

Manufacture:

Decorating with sparkles in bulk is a truly festive and at the same time pretty simple idea for decorating a bottle of champagne. First, soak the bottle in warm water to remove factory etiquette. Then we generously lubricate the bottle with glue and roll the container in small spangles until they cover the entire surface. As an additional decor, you can use homemade labels and a decorative bow made of beautiful ribbon.

Decoupage champagne bottle decor

Necessary materials:

• napkins with New Year's pattern;
• pVA glue;
• acrylic paints;
• acrylic transparent varnish;
• sandpaper;
• scissors;
• brush;
• sponge.

Manufacture:

First, a bottle of champagne is soaked in warm water to remove all labels from the surface. We paint the clean containers with white acrylic paint in several layers (the number of layers applied will depend on the opacity of the paint used). When the paint dries, the surface of the bottle should be sanded so that it becomes perfectly even.

Description

Champagne and candy tree - This is an unusual and amazing gift for the New Year, which can easily be done with your own hands. Such a present will not leave your girlfriends indifferent, because they can’t imagine the New Year celebration without champagne, and the kids will immediately sort the sweets from the New Year’s Christmas tree.

An unusual Christmas tree of champagne and sweets will be an excellent gift for colleagues at work. You can decorate your workplace with such a Christmas tree a week before the New Year, and on the eve of the holiday open champagne and enjoy sweets.

It’s not so difficult to make such a New Year’s miracle, you just need to get auxiliary accessories and elements. In order to make a gift tree of champagne and sweets at home, you need the following:

• • felt, satin green ribbon and organza - for decoration;
  • thick cardboard and corrugated paper - for the base of the tree;
  • wire, stapler, glue gun - for attaching Christmas tree elements;
  • decorative beads, Christmas tinsel and mica - to decorate the Christmas tree and festive packaging.

As you can see, all accessories can be purchased at any store, and if you look carefully at your husband’s tools, you can find a glue gun, a wire, and a stapler. Creating a Christmas tree of champagne and sweets, you can create endlessly. To decorate it, you can use a variety of materials and decor elements, embodying your design ideas and fantasies.

The step-by-step master class, which is presented below, describes in detail each stage. Therefore, you can easily create a fabulous Christmas tree from a bottle of champagne and sweets that will decorate any New Year's table and will be a wonderful gift for friends, for your beloved mother-in-law, and for work colleagues.

Ingredients

Cooking steps

You will need all these accessories to create a Christmas tree from champagne and sweets.



Take a thick cardboard and draw a circle with a diameter of 23-25 \u200b\u200bcentimeters. Gently cut the circle.



Flatten the corrugated paper completely and cut out a 60 by 30 centimeter rectangle.



This piece should completely cover the cardboard circle on both sides.



Cut the corrugated paper in half and glue it to the cardboard circle.



Turn the circle over to the other side and push it a little so that the paper “grabs”.



Cut the paper in a circle, slightly indenting the cardboard circumference.



Pull the corrugated paper slightly and glue it around the edges of the cardboard base.



Paste the entire circumference over it and remove any remaining glue with a dry cloth.



Now evenly apply hot glue to the cardboard.



Gently place the second part of the corrugated paper on the circumference and slightly press.



Cut excess paper exactly around the circumference of the cardboard.



Now let's start creating a retainer for a bottle of champagne. To do this, we will use the wire, twisting it several times along the diameter of the bottle. Instead of a wire, you can take a piece of foam or a thick cord.



Wrap the wire several times, wrap with green tape or floral tape.



Glue the base for the future Christmas tree of champagne in the center of the circle: this will greatly simplify the process of creating it.



Now let's start decorating our Christmas tree. As needles, we will use green felt and organza. Instead of these materials, you can use transparent mica or mesh.



We need to form a lot of jewelry that resembles bows. Cut the material you have selected into small squares measuring 10 by 10 centimeters. The larger these bows will be, the more magnificent your champagne and candy Christmas tree will be. However, too zealous in this regard is not worth it. If the bows turn out uneven and asymmetrical, you don’t need to get upset: after all, this is a Christmas tree made by yourself. To create a Christmas tree from champagne, you will need about two meters of felt and a half meter of organza with a width of 50 centimeters. Take better material with a little margin. In this workshop we will make white-green and pure green bows.



Take two boxes and put one on the second diagonally.



After that, bend the squares in half.



Turn both sides inward.



Fix the squares with the stapler in the narrowest place, as shown in the photo.



As a result, you should get a lot of these green and white-green bows.



Wipe the champagne bottle with alcohol to degrease it a little. Fasten the satin ribbon at the base of the neck of the bottle.



Let's start decorating our Christmas tree. Take the glue gun and apply glue directly to the bows, then start sticking them from the very bottom of the bottle, while retreating a few centimeters from the edge. But before you start working with the glue gun, remember that the glue is very hot and can be burned, so you need to work with it very carefully. It is also necessary to work as quickly as possible, since the glue hardens in a matter of moments.



First glue the bows on the sides.



After that, glue one bow in front and back at the same level.



And glue one bow between them at the same level. You should have 8 glued bows in the bottom row. In order to keep all the bows tight and not suddenly fall off during the presentation of the New Year's “Christmas tree”, glue a thin ribbon over them, as shown in the photo.



Glue the next row of bows so that the upper ones cover the gaps between the lower bows. Before gluing, step back from the bottom row one and a half centimeters.



There is no need to save glue: apply it abundantly on the nose of the cooked bow.



After you have already made several rows of green bows, fasten the chocolate candies perpendicular to each other.



First glue the candy on the sides, then glue one in front and behind the bottle.



In the same way, glue the whole bottle of champagne with bows and sweets, alternating a row of bows with a number of sweets. In the upper rows, glue the bows with the nose up.



It is necessary to paste over the bottle until you reach the satin ribbon. Fasten the upper bows with a thin green ribbon.



In order for the Christmas tree to hold tightly, glue the bows of the upper row with the bows of the nearby lower row.



Take a small piece of satin ribbon or any other that you like. Make a small bow out of it and stick a bottle of champagne on the neck.



The most solemn moment has come: Christmas tree decoration! To do this, you can use any decor elements: beads, Christmas tinsel or rain. Fix the decorations to the Christmas tree with hot glue.



Place the Christmas tree of champagne and sweets on the previously prepared stand. If desired, you can pack it in a transparent mica. Well, right, like a real New Year's gift! Such a beauty you should get! A bottle of champagne decorated with chocolates - what could be New Year's? Happy New Year and Merry Christmas!



Bon Appetit!

Content

With a beautifully designed bottle of champagne, you are not ashamed to go to the New Year's Eve party, and you can put the New Year's on the table, and it’s suitable as an apartment decor. We offer to stock up on ribbons, beads, spruce branches, small cones, Christmas decorations, glue and let's try to create an original craft. We have collected some interesting options. In the article you will even find an option for decorating champagne for a wedding (well, what if it comes in handy) and a video master class.

Cooking champagne tapes

For a bottle with ribbons for the New Year, in addition to the ribbons themselves, you will also need glue (you can glue a gun) and scissors.

First you need to measure the length of the first ribbon, which will go as the initial and will be located at the place where the foil ends.

Cut the necessary part and glue. Further, all other parts must also be attached to the bottle in exactly the same way. To make a kind of scarf or tie you need to use a ribbon of a different color. Each subsequent row should slightly cover the previous one.

And at the very end, do not lay the material on top of each other, but in a circle around the bottle.

Such a bottle of champagne with ribbons for the New Year can be decorated with lace inserts, bows, feathers and beads.

Something like a female version can be done like this:

Use a bow fabric to decorate the bottom. The skirt must first be seized with a thread and a needle and glued. Making champagne this way eliminates the need to remove the label.

Champagne "Santa Claus" and "Snow Maiden"

This type of decoration is a little more complicated than the previous one. You just need additional materials - red and white felt, pearls, some kind of shiny ribbon or jewelry in the form of shiny stars.

First you need to cut the red felt so that it can cover a bottle of champagne, and the seam needs to be decorated with a red ribbon and glue.

It is on this basis that we will stick tapes, as in the previous master class.

So to the very end you need to stick all the tapes. Now it remains to decorate the bottle under Santa Claus - stick the white parts from felt to create the finish of the sheepskin coat, and on the neck of the bottle, or rather, on the cork you need to hang a hat. Also use lace fabric to make the Fur coat elegant.

In exactly the same way, only using blue braid, you can arrange champagne under the Snow Maiden.

We offer a look at a few more options - a bottle decorated with ribbons for the New Year like Santa Claus and his granddaughter.

The face for Santa Claus can be made of felt. And note that a beautiful bottle of champagne and matching glasses can be an excellent gift set.

Applying all the same simple design technique, you can come up with a different design, choosing ribbons to match the decor of the interior or New Year's table. Decorating a bottle of champagne for the New Year with ribbons is a rather fascinating event, and when you get your hand around, then attract others to this work. You can even arrange a whole New Year's master class, but our articles will help you with this.

Please note that the braid can be laid not only with a "herringbone", but also just gently wrap the bottle using glue droplets. The next option is more suitable for a wedding, but you will pay attention to the technique. In addition, a wider ribbon was used in this case.

Champagne with ribbons and tie

In this case, the decoration of bottles for the New Year with ribbons is complemented by a tie. By the way, this option is suitable as a gift to the pilot, military, police officer, in general, now you yourself will understand everything:

The easiest option is to make a small roller out of the tape and attach it with a pin to the bottle. More complicated is to demonstrate the skill of knitting a tie and make a real tie only in a smaller version.

Full bottle decor with ribbons

Before this option, we left the neck of the bottle unformed, because it is already beautifully decorated with foil. But in fact, you can decorate ribbons completely the whole bottle.

These are also such wedding options! Well, what if you are invited to a wedding on New Year's Day - that’s an occasion to bring beauty.

Creative bottles for the New Year

And when you have already learned how to decorate champagne with ribbons, you can try and recreate. Use all the materials at hand, natural materials, your imagination, the imagination of children, friends and go on creating! We will help you a bit with this!

Please note that flowers can be bought ready-made, but you can also make them with your own hands. We have a lot of articles on the topic of creating flowers, be sure to read!

Take a look at the first option. Here lace and gathered wide ribbon are used.

A combination of gold and red always looks luxurious. By the way, use the yellow color - this is the color of the coming year and it should bring good luck.

Champagne in the form of a Christmas tree

For such a craft, we need:

• green ribbon
• green felt;
• beads;
• gold ribbon;
• glue gun;
• scissors.

From felt, you need to make a removable base, in which later you can put champagne.

Now many of these blanks need to be attached to the felt base. You should end up with such a Christmas tree:

We have prepared TOP tips for decorating champagne, well, or any other drink with ribbons that are useful to you in your work:

Tip 1. Usually, such work requires about 5 meters of satin braid, keep this in mind when you buy material.

Tip 2. It is better to use a glue gun, but only in small quantities. Literally a pea for every few centimeters.

Tip 3. It’s better not to cut the entire bake into pieces at once, but to measure it during operation. Because the further you go down to the base of the bottle, the longer the tape will be required.

Tip 4. As a design, you can use stretch guipure, it is easier to work with.

Tip 5. Wrapping the bottle tightly is optional.

Tip 6. The bottle can only partially be decorated with ribbons. For example, you can fully consolidate champagne (we talked about this technique), you can apply a contour drawing, acrylic paints. Well, on top, attach several tapes of different widths and colors.

Well, our favorite tradition. We offer to see how to make bottles for the New Year with ribbons master class on video:

By the way, in these cases, not felt, but ordinary cardboard is used as the basis. But in fact, this is not necessary. In general, everything will come with experience! Try different options, spin, play around with the materials, maybe you will get some interesting and original version of the design of champagne and not only it. In the same technique, you can decorate glasses or a vase. And we only wish you inspiration and creative success!

Post Views: 1,034

Interesting hand-made products can unusually decorate the festive atmosphere, creatively complement the New Year's table and even become an original surprise for relatives or friends. Recently, practical gifts have been offered at a special price, even on the wedding day, young people are presented with not only bouquets, but champagne sweets. If you were invited to a celebration or to visit on the eve of the New Year holidays, then you can try to decorate a bottle of champagne that looks like a Christmas tree. To make this product is very easy, the most important thing is to be able to show imagination.

We make a Christmas tree of sweets and a bottle of champagne with our own hands

To make a craft, you need the following materials:

• a bottle of champagne;
• sweets;
• glue gun;
• tape tape;
• piece of wire;
• beads;
• a cut of green organza;
• floristic felt of green tone;
• stapler;
• corrugated paper;
• thick cardboard.

It is necessary to cut a circle from a cardboard sheet, the diameter of which is 25 cm. This will be a pedestal for the future Christmas tree. Then we take paper corrugation. With its help, we will decorate the Christmas pedestal on both sides. It should be glued to the cardboard. For this we need an adhesive gun. Next, cut the paper around the circle with a margin of 1-2 cm so that you can wrap the edges.

Glue the rest on the second side of the circle, and cut off the excess. For stability of the structure, we fix using wire. We wrap it around the base in order to calculate the size of the retainer. Then we decorate the wire using tape tape or some other decoration.

Next, we begin to form Christmas tree needles. For this, organza and floral felt are useful to us. We cut out the squares from these materials, their side is 10 cm. Then we take 2 green squares from felt and fold them obliquely. The sides must be bent so that an envelope eventually comes out. We fasten the product with a stapler. We alternate squares of organza and floral felt to make the product interesting.

When you have prepared enough elements, you can start filling out the bottle. We begin wrapping the bottles with envelopes from the bottom. We do this with hot glue. For the first row you will need 8 blanks, and then form the product as you like. It is important that the Christmas tree comes out fluffy. For reliability, envelopes can be glued with tape.

As a decorative finish, we use sweets. They can be glued simultaneously with envelopes. Use a satin border to make a bow to decorate the bottle. Christmas tree made from a bottle of champagne and sweets made.

You can make another Christmas tree from a bottle of champagne, which will become an unusual decoration of the New Year's table. From the materials we need:

• organza
• tapes
• beads.

From organza cut squares of different sizes. In total there should be 30 squares, the sides of which are 14 and 8 cm. We cut another 2.5 m of organza into squares, the side of which is 10 cm.

We will need to fold them into triangles. The blanks are fastened with an adhesive gun.

Then you can start gluing these parts. In the lower part we attach large triangles, in the upper part - small blanks.

Decorate the finished Christmas tree with ribbons and beads.

Master Class. Champagne and candy tree

So, create a Christmas tree from a bottle of champagne and chocolates you can in just an hour. There are many products that make, you just need to be able to express your creativity.