Pregnancy Diets Health

Practical advice - how to choose a fur coat and what you need to know about furs? How to choose a fur coat in size and quality. Tips for buying a quality natural fur coat How to choose the right fur coat length

Mink coat is an expensive pleasure. In the market of fur products, it costs at least 40 thousand rubles. Therefore, women choose a fur coat carefully. When choosing, you need to know by what criteria the quality of the fur and the fur product is evaluated.

The main parameters for determining the quality of outerwear by professional fur businessmen:

Criteria Quality Poor quality
Gloss of the pile There are overflows in the light. Shine is uniform. There is no brilliance or glitter not everywhere.
Brightness Natural brightness. Mirror.
Skin sizes More than 15 cm in length and width. Less than 15 cm.
The presence of spots All wool has a uniform color. There are spots from the cell and smudges under the pile.
Wool When plucking in the hand, less than five hairs remain, and when you repeat the manipulation, it may not remain. When twitching, villi remain in the hand, which is also observed with repeated twitching from the same place.
Smell There is a natural smell of skin, fur. There is a vinegar, gasoline smell or foul meat.
Color spectrum Noticeable natural color of the animal or high-quality coloring without transitions. When washing off, the paint leaves marks on the hand. In the light, color transitions are noticeable.

Important:   Buyers need to remember that the process of making a mink coat is very time-consuming. If the skin is made poorly, then it will stink if there is fat left over, and if there is no fat at all, it will dry out, causing the pile to fall out.

How to check the quality of a mink coat

Before buying, find out about methods for determining the quality of mink fur. Do not trust sellers, since for them the main task is to sell goods.

There are simple ways to determine the quality of the fur yourself:

  1. Run a hand over the fur against the growth of hairs, he will immediately restore its previous position. Here it should be noted that the pile does not stick out in different directions.
  2. Take a closer look at the fur. Under the core pile, there should be a fluff, shorter hairs. The reliability of a fur coat in severe frosts depends on them.
  3. Examine the fur coat with your hands. If the villi stick to the hands, the fur is of poor quality. Also, the seller must allow the fur to be pulled, which will also help determine the quality of the fur. Pile should not fall out. Otherwise, your fur coat will constantly shed and lose its appearance after the first months of wear.
  4. Another way is the sense of smell. Smell the future fur coat. From it should not emit extraneous chemical odors, only natural.
  5. Examine the fur coat from the inside. Lining fabric, sewing quality, size and evenness of stitches, the durability of the socks will depend on this.
  6. If the mink is colored, we check the quality of the application. To do this, take a piece of light fabric, rub the pile. If traces remain on the fabric, tinting is of poor quality.
  7. Check that there are no rust marks or faded areas on the coat.

When choosing a fur coat, choose the right size, model. Note that the mink product for winter, under it you have to wear warm clothes. When worn, it should be comfortable, not embarrassed, in line with modern fashion trends.

Authentication Analysis

Consider what types of minks make expensive fur coats:

  • Living in North America, Canada. Black mug blackglama is especially appreciated. Her fur is velvety and durable. Blackglam mink is sold at auction and has a very high cost.
  • Scandinavian. Lives in North America, Denmark, Finland. Cheaper than North American, but has a different color. From blue, gray, to brown and black.
  • Living in Russia. Bred new breeds of the North American mink, but with warmer fur and a long pile.

When buying a fur product, find out information about the manufacturer, this is also very important. Manufacturers must be known in the fur market, in proven fur salons. In the salon, the seller must present a quality certificate to convince you of the authenticity of the mink product.

Many couturiers sew a fur coat from another beast so that a simple housewife does not distinguish a mink from a groundhog or a rabbit. Here you need to know the structure of the fur. Mink fur is tougher and coarser to the touch than rabbit fur, and groundhog hairs generally prick.

To achieve a unique resemblance between a rabbit and a mink, his fur is plucked in a special way. But when viewed firsthand, it is noticeable that the undercoat has a different length or it is the same length with the core pile. So - in front of you a rabbit.

Remember, the rabbit always leaves a pile on his hand when twitching, pinching.

To distinguish a mink from a groundhog, you need to take the pile into a fist and slowly release it. If the fur flows one-dimensionally, it quickly takes its former position - the mink, and if it leaves stripes that separate the lines of the pile from each other, and when it returns to its previous state it has a sense of bruising, this is a groundhog.

There are still nuances. Remember, a mink coat weighs a little, if you tried on it and didn’t feel that you are wearing winter outerwear, then the fur coat is natural, but the groundhog, rabbit will be more tangible and significant, in the literal sense of the word.

After the purchase, all methods can be carried out at home again to make sure 100% of the natural fur.

How to determine the nature of the mink skin?

When auctioning Blackham mink skins, they are checked for naturalness. A label indicating the type of mink is sewn to each skin. The label should be white with a black inscription, also when viewing it under ultraviolet rays, you can see an invisible word.

Each label has a number printed on it. By serial number, you can determine the authenticity of the skin. Each number can be found in the register of crafted skins on the Blacklam website.

Today, it is customary to chip coats. Chipping will reveal counterfeit goods. The barcode is applied to outer clothing if the product is lined with fur or the product itself. But if there is only fur trim (collar, sleeve, pocket), then the chip is not applied.

By the barcode, you can find a mink product, or made from any fur, including fox, on the website of the tax service. This suggests that the production of this coat is legal.

Each fur coat has a KiZ chip attached. The chip determines the country of origin. If the chip is green - Russia, red - the fur coat was brought from European countries. Marking can be sewn into the seam of the product, sewn onto the main label.

If an outerwear store sells goods not marked, then this is fraught with penalties, up to confiscation.

Useful video

Discussion: 8 comments

    I am not a vegetarian, but I would not buy a mink coat, and generally any coat. Now there is such a choice of clothes that I became an ardent defender of animals in this regard.

    Reply

    I can say with confidence that it is better to trust the domestic manufacturer. I’m buying furs at Sadovod in “Furs from Vitaly” on Sadovod, line 4, Pavilion 148. Indeed, the fur is shiny and very high-quality cut.

    Reply

    I really wanted a mink coat. I saw an ad on Avito, saying that a woman attributed the season, and she was tired of her ... A noble coat and a quarter of the money cheaper ... I bought it, and after a couple of seasons I also thought about selling it, but then I gave it to my mother. The fur coat is very light, but at the same time warm (it used to go to -20), and the hairs are like silk. The style has changed to a more sporty one, the fur coat has become irrelevant, but it fulfilled its dream, moreover, itself!)

    Reply

    A good mink that will be worn for many years is nafa or blackgama. And they are very warm. There are such furs in Elena Furs, now the sale has begun, they sent me a newsletter. Prices are like in summer, but for now, winter has just begun, at least in Moscow.

    Reply

  1. Reply

    Long coats are not entirely practical. I realized this after I vilified one season. I had to take my own to the studio and they made me a short fur coat, hat and bag! I bought the famous brand Antonio Didone. The product is very high quality, so I have been going with this set for more than one year.

    Reply

    Not a single down jacket will be as warm as in a fur coat. If you choose a quality product with thick fur, then at -35 you will not freeze. I can recommend Condor boutique in the Emirates. I checked the durability of the fur coats on myself. I was extremely pleased with the quality.

    Reply

It is not easy to choose a natural fur coat. The buyer must take into account a lot of nuances: to be able to correctly evaluate the fur, to distinguish between mink and rabbit, and beaver from nutria, to know good producers. With this approach, a fur new thing will not only become a luxurious decoration, but will also serve for more than one year.

The choice of a fur coat depends, first of all, on the preferences of the woman. A major role in this important matter is played by such criteria as the type of figure, lifestyle, current trends in fashion, and the opinion of specialists. As for the latter, they recommend paying attention to the following points:

Color

  • “Lady-autumn” and “girl-spring” are in harmony with warm colors: pinkish, orange, pistachio, beige;
  • “Woman-winter” and “young lady-summer” look organically in fur coats of cold shades: gray, greenish, blue, chocolate, metallic.
  • classic colors - white and black - go for almost everyone.

Do not forget about the modeling function of color. A full woman will look slimmer in a dark brown or black fur coat. And thin-skinned girls should prefer outerwear more light.

The size

The most important landmark in the selection of a fur coat is its compliance with the parameters of the figure. The main thing is that the product should be uncomplicated. Classic models are characterized by free cut. The fitted volumetric figure of a fur coat is a deliberately wrong decision. Such an outfit loses its most important “plus” - elegance.

The product, which will fit, will give one hundred percent comfort. He does not want to pull back or move forward, pull back the collar of the collar or roll up his long sleeves, like Pierrot's. Having tried on such a fur coat, it will be difficult to part with it.

Style

Stylish tailoring of a fur product, taking into account the specific proportions of the body, growth and physique - is this not every customer’s dream? To make it come true, you need to keep in mind the following nuances:

  • a woman with a miniature complexion will simply "drown" in a long-flared flared coat;
  • to adjust the silhouette like an orange - without signs of a waist - elements such as a peplum along the hem and a massive collar will help;
  • a fur coat to the middle of the thigh, extended to the bottom, with an emphasis on the waistline, emphasizes the dignity of a slim figure;
  • owners of a lush bust and wide hips should look for cropped trapezoidal outerwear;
  • tall and thin ladies will go fluffy sable or arctic fox fur, as well as mink beads - fur coats sewn from skins located not across, but across.

Knowing these little secrets will be of great benefit to women who want to harmonize their silhouette and keep up with fashion.

Heat preservation

It is best to warm the fur of a bear or reindeer, but products from these materials are not common with us. Skins of sable, arctic fox, raccoon dog, beaver are considered very warm. They are distinguished by the largest number of outer hair and the most dense subfloat. True, they are all pretty heavy.

Less heat-resistant are astrakhan fur, mink, ermine, chinchilla. Little hope does not freeze in severe frost leave products from a goat, rabbit, groundhog. And the gopher and hamster fur practically does not warm.

Appointment

Fashion trends of recent years dictate the choice of fur products, taking into account the purpose of the acquisition. In this regard, fur coats can be divided into two categories:

  • for every day, including for work, - light, practical mink, astrakhan, hare fur coats in tandem with jeans or trousers;
  • for special occasions - items made of fox, lynx or sable fur in combination with an elegant dress or a spectacular costume.

Life time

To find out how many seasons a new coat will serve, you need to take into account the following gradation (the numbers in it indicate the number of seasons that can withstand the skins of the listed animals):

  • 20 - river beaver and otter;
  • 10 - mink;
  • 7 - marten, blue fox, astrakhan;
  • 5 - fox, nutria;
  • 4 - protein;
  • 2 - a hare, a rabbit.

The choice of high-quality fur coats by type of fur: the main nuances

First, we outline the common features of real fur. Unlike a cheap fake, he is soft and obedient, does not paint his hands, does not crumble, does not have a specific smell and, of course, pleases the eye.

Now let's talk about the nuances of choosing the right natural fur coat from different types of real fur:

  • from mink: the hairline is soft but stiffer than that of a rabbit; shimmers and streams; elastic, obedient when stroking "against the coat", the villi even in length do not stick together. The price of mink skins depends on the color: walnut, dark brown, red are less valued, and the most valuable are brown with beige undercoat, white, black with a purple tint;
  • from the marten: soft, lush, silky fur with long hairs of uniform density, without bald spots. The hand is literally drowning in it. The color scheme is represented by saturated shades of brown. Fade a tone darker than the general color;   Marten fur coat
  • from river beaver: heavy fluffy fur with thick undercoat; natural colors - from chestnut to dark brown; from a cheaper nutria, which is often given out as beaver fur, it differs in a greater degree of fluffiness;
  • from mouton: Sheepskin treated and painted in different colors has absolutely straight hairs trimmed to 1.27 cm (shorter length is evidence of poor quality). The pile is smooth and soft, like velvet. It has a natural shine;   Mouton fur coat
  • from karakul: Very thick, shiny, tightly spaced, medium-length curl hair, forming a clear pattern. The most common color is black, less commonly gray, golden, white;   Karakul fur coat
  • from sable: the hairline of this image material has no equal in density, splendor and silkiness. The length of the hair reaches 4 cm. The vertical spine completely covers the down. A palette of colors - from sandy to brown, sometimes with a "gray";   Sable fur coat
  • from rabbit: the fur is short, thick and delicate, resembles plush; all hairs are the same length; rich color variability: black with a blue tint, tan, silver, gray-white;
      Rabbit fur coat
  • from fox: hair long and thick, a great many colors: from the classic fiery red to white with gray undercoat; the hair of a particularly valuable silver fox plays and shimmers in three tones: smoky gray (at the base), white (in the middle) and black (at the tip);
  • from raccoon: voluminous silky long-haired fur with a soft high spine and the same undercoat; typical colors: brown-beige, milky gray; the fewer yellow shades in the tone, the higher it is appreciated.   Raccoon fur coat

How to choose a fur coat in the store?

A natural fur coat made of mink or fox, rabbit or astrakhan is an expensive pleasure. The right choice of a good product, pickiness to each of its nuances will allow you to rejoice at the purchase for more than one year.


Tips from professionals
  1. Rate the density of the fur. Its insufficient density can mean one of three: either the skins were processed in violation of the dressing technology, or they were too stretched, or the animals were slaughtered in the summer, during molting. In all these cases, the purchase will be unreasonable.
  2. Stroke the fur in different directions. Natural hairs will not bend or break; underneath you will find dense downwigs.
  3. Soft animal skins, unlike artificial substitutes, are not afraid of any manipulations: they can be wrinkled, squeezed, pulled - they will again acquire their previous “salable” appearance.
  4. Make sure that the product is not painted: spread the hairs and check the color of the skin - it should be white. To test the quality of the painted coat, swipe it with a damp cloth - good paint should not leave marks.
  5. Shake the fur product. If at the same time you do not hear any sound and do not notice intense shedding of the villi - everything is normal. If the fur coat, like an oilcloth, “rattles”, many hairs will fly off from it, so the fur has been overdried. Such a product will soon lose its shape.
  6. Check how the fur pieces are fastened together. Unscrupulous manufacturers produce not stitched, but glued fur coats. Such a product will bring nothing but grief.
  7. Pay attention to the lining. If it is sewn tightly, this is already a “minus” to the product. Well-known manufacturers do not do this, giving the buyer the opportunity to make sure that the dressing is full.
  8. Consider the inside of the product. The inner side of the skin - mazra - should be distinguished by a smooth haze of light color. If it turns yellow, it means that the fur is already second-hand and fragile. To the touch, the skins should be elastic, soft and smooth.
  9. Make sure that you get a one-piece product made from pieces 15 cm long. Such sewing is considered to be standard. An alternative to it is a fur coat of pieces connected using a special computer program. Such technology, although expensive, will not provide either durability or charm to the product.
  10. Take the time to learn the tags. Keep in mind that the most expensive and warmest fur coats are marked with the following inscriptions: Platinum / SagaRoyal, NAFA / American Legend.

Having examined, felt, cowardly coat, it is necessary to put it on. It is recommended not just to look yourself in the mirror, but to "live" in the new clothes for about five minutes. If during this time she becomes native - we must take it!

A beautiful and practical coat is the dream of many women. Moreover, in the cold season it is difficult to do without it. How to prepare for the winter season and choose the right coat? To make you happy, you should pay attention to some subtleties when buying.

Choosing the right fur coat is not an easy task

Rules for choosing a fur coat: fur, style and coloring

The most popular for many years is a mink coat. If you prefer elite fur, pay attention to products from sable, lynx, chinchilla and marten. Economical options - fur coats from nutria, muskrat, muton, raccoon, astrakhan.

The colors are in fashion as classic - silver, black, brown, and complex - brown-beige, gray-blue, etc. At the peak of fashion, multilayer fur. The essence of this coloristic effect is that the base of the pile is different in color from the tips. Another fashion trend is the color of the fur stencil for a leopard, tiger, snow leopard.

In addition to dyeing, the fur is often sheared or plucked. When plucking, hard long hairs are removed, and only a soft undercoat remains. A haircut is usually done under some kind of fabric texture - velvet, mohair. Widespread and laser haircut, which makes the fur look like openwork lace.

As for the style, designers offer the most unusual cuts in the style of "wild skin" - without lining and finished edges. Lovers of less extravagant things should pay attention to the “trapezoid” coat that always remains in fashion.

A fashionable trend of recent years is the shortening of a fur coat. Do not buy the product on the floor, the best length is to the knee or mid-thigh. Very short fur coats are also in fashion

Combined fur coats from several types of fur do not give up their positions. Mink is often combined with a fox, sable - with a trot. In addition, any fur can be combined with suede, velor or satin. Knitted fur coats remain in demand.

Heat and strength

To choose the right fur coat, you should pay attention to the warming properties of various furs. The warmest include fox, muton, sable, arctic fox, chinchilla, nutria, astrakhan, mink. Worst of all, the ermine and groundhog will warm. If you live in an area with a humid climate, you should choose a fur coat from beaver, nutria or otter.

The most wear-resistant are the fur of an otter, beaver, sable, seal, leopard, raccoon, mink, astrakhan, marten. The most short-lived fur coats are obtained from chinchilla, rabbit, mole.

Purchase Rules

Fur coat in the market, of course, cheaper than in the store. However, no one guarantees the quality of a marketed product. Even if your new thing does not go apart, poor-quality fur can cause allergies or skin disease. Therefore, buy a fur coat only in a store where you will be presented with a certificate of conformity, which includes all information about the fur product.

Present in the wardrobe of many women. In the western part of Russia, this accessory is rather a sign of prosperity, and in Siberian regions a mink coat can be seen on almost every lady. Therefore, the question of how to choose a mink coat is really relevant.

Firstly, I want to get a good fur coat, to shine in it, I want it to serve faithfully for many years and emphasize only virtues. Secondly, the cost of such a purchase is not small, so there is a desire to spend money only on a quality product.

A detailed review of how to choose the right mink coat when buying, read below.

First, it’s worthwhile to understand why girls and women choose just the mink. Why is this fur so attractive? After all, there are alternative options: beaver, chinchilla, fox, etc.

We highlighted five such reasons.

  1. Mink looks expensive.   If the mink is of high quality, her fur really adorns the woman. Doesn't light fur options fit? There are many others - black, with transitions, brown, etc.
  2. Practicality.   The mink is universal. It looks stylish and suitable for all occasions; it can be worn for celebrations and worn everyday. Any accessories, shoes, etc. are suitable for the mink.
  3. Good mink serves for a long time, 10 years, it can definitely be worn.
  4. Variety of styles. Mink is a fur from which you can sew a fur coat of any style. Amazes a lot of design decisions. You can choose the classic and the most trendy option - from the "master's" fur coats to the floor to short "avtoledi" and mantles, with and without a belt, flared, absolutely any length, with a hood or not, etc.
  5. Heat.Mink is warming. Contrary to popular belief that mink coats are thin and do not save from frost, this is not so. Mink is quite warm fur. This is confirmed by the reviews of women who everyday wear mink coats in winter in frost. Just if you are going to wear such a coat constantly and in a harsh climate, you should carefully choose its style.

It turns out that North America is the birthplace of mink.

Now mink is bred in many countries, the leaders in this occupation are the USA (their famous brand American Legend, as well as Russia, China, European countries, etc.

  In animal husbandry historically formed the following types of minks:

  • north American   - bred in North America and Canada, it is distinguished by velvety and fur density, the famous Blackglama mink, which is sold at auction, is valued.
  • scandinavian   - This is a mink from North America, which was brought to Northern Europe (Finland, Denmark). Now the skins of the Scandinavian mink are very popular, and at a price it is cheaper than the North American. The Scandinavian mink is distinguished by many color shades - gray-blue, brown, dark, and the famous black diamond adjoins here.
  • russian   - This is again the same North American mink, but once imported into Russia at the beginning of the 20th century. Now such a mink also has its own characteristics - it is a longer pile and fluffy, such a mink is warmer. But, according to experts, not enough quality.

Today, mink is grown in other countries, including China. In China, all types of mink are grown, but production technology is not established, so the quality of such fur is also in question.

By the way, the climate also affects the quality of the mink. So, in the southern climate, animals have not such a thick and warm fur, but in the northern hemisphere, animals have a thicker undercoat.

What determines the quality of a mink coat? This question should be studied before buying, so as not to throw money away.

  1. The quality of the fur.   Of course, first of all, you should pay attention to the quality of the whole product as a whole, but the quality of the fur is in the first place.

Signs of good fur:

  • shine   - look, so that the fur is not dull, it should overflow;
  • pile elasticity - the pile should be smooth, not sticky, airy and return to its original position if it is crushed. You can take a little fur, and then shake the coat. If he straightened right away, then the quality is good. Also, the pile should not shed. Pinch a little fur, in your hand you should not have fibers;
  • fur color   - should be smooth, uniform, without spots; if the mink is dyed, then it should not leave any traces when conducting along the fur with a damp cloth. By tradition, dark shades of fur (to black) are more expensive than light brown; blue (gray) mink and white are also valued;
  • back of the fur skin   - should be soft, without cracks, bumps and should not creak; required small downs.
  1. Sewing quality.   In this case, you should pay attention to what the fur coat is made of: from solid plates or pieces. This is visible to the naked eye.

It is worth carefully inspecting the seams on the inside of the product. The seams should be smooth, without holes and other defects. Pay attention that there are no traces of glue. Spots indicate that they are trying to sell you a glued mink, the quality of which is not up to par.

  In the market of mink coats, a budget option is also currently being sold - fur coats sewn crosswise (the so-called cross-section), when the fur platinum is laid not horizontally vertically with a pile down. Such products are much cheaper, and if the budget is limited, then you can choose a mink coat across quite nice and high quality.

  1. Manufacturer.   Naturally, you should ask about the manufacturer. We have already examined what types of mink are. The most popular fur coats that can be presented to you are European, including Italian, Greek, Russian, Turkish, Chinese production.
  1. Price.   Remember the folk wisdom that has never failed: "Free cheese is only in a mousetrap." Mink is a valuable fur, so when thinking about how to choose a high-quality and good mink coat, do not count on a small amount. If the price of a mink coat is prohibitively low, then you will get the appropriate quality. As a rule, the average price for a real mink coat of decent quality is in the range of 70-100 thousand rubles and above.

Choose a mink coat carefully, it is easy to get on a defective or fake product, so the price is also an indicator of the quality of the fur.

  1. Place of purchase. An indicator is the place of purchase. If you go to buy a fur coat to the market, then you have a chance to buy a "pig in a poke". It is better to choose and buy a fur coat in a proven fur salon or store (or a chain of stores with good customer reviews and an established reputation), where you can ask for a certificate for the goods.

And you can choose a good mink coat by carefully following our tips below.

Professional advice on choosing a good mink coat

To answer the question of how to choose a mink coat correctly, a careful consideration of several important nuances will help.

Tip number 1. Style

When choosing a mink coat, you should think about the style and size.

The style of a fur coat should be selected based on the characteristics of the figure, growth and preferences. You can’t keep up with fashion, so it’s not always worth choosing trendy models.

Classics are always in fashion, it is better to choose such a fur coat for business status women. Young girls can choose a fur coat based on the fashion trends of the season.

Short styles "on the floor" are unlikely to suit girls of short stature, but on tall ladies such a fur coat will look chic. Full women can look at flared styles, this will take away the volume.

Tip number 2. Size

For many, the problem arises of how to choose the right size for a mink coat.

How to choose a fur coat size? This moment needs to be determined by internal sensations: walk, raise your hands, feel the product on yourself, whether it is the size for you. It should not fit the body. If you have a feeling of discomfort, then this is hardly "the same coat of yours."

Tip number 3. Region of residence

In Siberian regions, you need to choose warmer types of mink and long styles, in warmer regions you can follow the fashion and buy a fur coat easier and shorter.

Tip number 4. Lifestyle

Lifestyle also leaves its mark on the choice of style. If you are an active auto-lady, then a long fur coat will be inappropriate, it will quickly lose its original appearance.

Think about the fact that if you often travel by public transport, you hardly need to buy a light mink coat.

And the last one. If you decide to buy a mink coat, think about the purpose of the purchase, imagine which coat you want.

Is it a desire to keep warm in the cold or just buy a luxury item? Will you wear it rarely (as they say, “on the way out”) or without taking it off all winter season?

The more questions you ask yourself and really evaluate your goals and budget, the more likely you will find the perfect mink coat.

Usually, when choosing a fur coat, the standard question arises: what is the quality of this thing. For all its simplicity and apparent unambiguity, very often, there is not (up to) understanding between the seller and the buyer, because the fur coat does not have such universal comparative indicators as “acceleration time to 100 km”, “number of pixels” or “suction power”, therefore, what is good quality (like happiness) in this case, everyone understands in his own way.

The only objective quality parameter is wear resistance, the rest lies in an abstractly subjective field: for some, quality is a fashionable design, a well-known brand and original style, for others it is a country of production, for others it is fur, dressing and sewing, for fourth it is a service life .

Fur Value   determined by the thickness of the hairline, its height, softness, the presence of shine. The most valuable fur is mink or sable. The quality of the mink varies in color, “density” and method of tailoring.

The cheapest mink   - walnut, that is, light brown, then comes dark brown. Then - a variety of redheads, from juicy golden honey to light amber. Black mink, beige, gray and blue (also gray, but with a grayish-blue tint) is even more expensive. In the next price category - the so-called “tourmaline” (beige undercoat and brown long hair, which creates an interesting smoky effect) and white fur (sometimes with gray hair). The most expensive to date - the mink "black diamond", black with a blue or purple tint. An inexperienced buyer can find it difficult to distinguish it from just black. In addition, the furrier craftsmen learned how to paint cheaper fur so deftly that you can not distinguish it at first glance: the fur also sparkles and shimmers. Method one: spread the undercoat with your fingers (it should be purely black) and check the skin color. If the skin is not subjected to hairdressing procedures, it should remain white.

Life timeproducts are directly dependent on the durability of the fur. The most durable otter fur. A fur coat from this fur will last all 20 seasons, from a river beaver - 18, a fur seal - 15-17, minks - 10, martens, blue fox and astrakhan - 7, foxes, nutria - 5, squirrels, groundhog - 4, rabbit - 2 season.

The quality of a fur coat and other fur products directly depends on the wear of the fur. But the fur does not go bald, does not fade, does not wipe, neither fur rain nor snow, nor even a crush in public transport are afraid of a fur coat of such a fur.
When assessing the quality of fur, the following factors are taken into account: density, height, gloss, color fastness, softness and color of the hairline; softness, ductility and tensile strength of leather; the presence of defects. An important indicator of the quality of the fur is the wear, which is shown in the table. The otter fur has a maximum wear (100 points and 20 seasons of socks before major repairs).

Wear,%

River beaver

Sea cat

Astrakhan

Red fox

Muskrat

Sheared rabbit

Long haired rabbit

However, all these terms are relative, because some women manage to wear their astrakhan fur coat for decades and pass it on to their grandchildren in good shape.

In terms of heat resistance, fur can be arranged in the following order: arctic fox, deer, raccoon dog, fox, wolf, hare, marten, sable, mink, columns, astrakhan fur. Poorly warms the fur of a sheared rabbit, goat, groundhog, ermine. And the fur of a hamster and a gopher does not warm at all.

Also, the fur coat should not be too light. In pursuit of lightening weight and saving fur, furriers often stretch fur: the skin thickness decreases, and the distance between the hairs increases, as a result, the fur coat becomes cold. The weight of the finished product depends on the length of the fur, the quality of the skinning and the presence of insulation. By the way, recently, insulation is either not used at all, or is used only in the chest and back. Fur coats from the skins of males, but the females are colder, lighter and more expensive.

Well, now let's dwell a little more on the quality of the product.

Fur coat quality   depends on the quality of the fur and the quality of tailoring.

In order for the skin to be suitable for sewing, it must be soft and easily bent. The nuances of dressing usually depend on the type and condition of the processed skin. To obtain the desired result, the skin goes through 4 main stages of processing: preliminary cleaning and soaking; removal of residual veins; tanning of the skin and final cleansing. Removing the protective hair (if necessary), peeling the treated skin to reduce weight and give it elasticity, stand out and are a separate technical operation.

In order to verify the factory origin of the product, first smell it. "Self-made" emits a sharp, but also not very pleasant smell. Next, doubt any part of the product, for example, a sleeve or a shelf. When unclenched, this piece should immediately take - the original form. Remember, the skin should be soft and the hair shiny and friable.

The easiest way to check the quality of mink fur for durability is to grab a few hairs with your fingers (as if taking a pinch of salt), raise the coat and shake a little. If the hairs do not break out, there is a reliable fur coat in front of you. You can also shake the fur coat and see how the villi show off. If the process is clearly not intense (after drying procedures it will “fly” from any fresh coat), then everything is fine.

Well, and, of course, the fur should be the same in length over the entire area of \u200b\u200bthe fur coat, hollows and even more bald spots are not allowed. If the fur is dyed - pay attention to the color, it should be uniform on all details. Swipe your hand over the fur several times - you should not have a feeling of greasy in the palm of your hand, high-quality fur is always elastic and silky to the touch.

Unscrew the lining and look at the leather fabric. In a good coat, it is soft, smooth and elastic. If the leather fabric is stiff, rustling or rattling at hand - then there is a high probability of poor quality and fragility of the coat.

Should I buy dyed fur coats?

Here it is necessary to distinguish why the fur was dyed. If in order to hide defects in the fur and its dressing (for this, dark colors are usually used), then this is unacceptable. But there are other coloring purposes. For example, for wild nutria, dyeing of fur is necessary, because natural color is not very attractive.
  In addition, the fur fashion dictates the expansion of the color range of furs and very often the tinting of the fur or its coloring in one or more colors is used.
  Given the high level of modern technology and the high quality of dyes, such dyeing does not significantly affect the quality of the fur.
  Therefore, if you liked a fur coat of bright red mink or purple fox, feel free to buy and do not deny yourself anything.

How to distinguish fur from a fake?

Fur Products Quality Standard

This review is not about determining whether a fur product meets the quality standard of dressing and tailoring. Often, cheaper fur is given out for cheaper, for example, before, marten fur was given out for expensive sable fur. We will focus on such cases.

Beaver fur and nutria fur

Beaver fur is often faked with nutria. To distinguish the fur from the borba - pay attention to the downs - it is thick at the borba. The second thing you should pay attention to is the spine - in beaver it is longer.

  • Previous -