I really like this model of the top, so I suggest you pay attention: the top pattern on one shoulder.

You will need:

• knitted fabric
• 2m knitted trim in tone of fabric
• 1 m reinforcing tape 1 cm wide
• 15 punch buttons

Cut Details:

Top pattern - only 2 details.

Details of cut from elastic knitted fabrics with elastic stitch or narrow zigzag stitch. And the bottom hem to maintain its elasticity is sewn with a double needle.

Description of the sewing pattern of the top on one shoulder:

•   , and process the side seam of the topic.
•   a trim line around the entire neckline so that the fabric of the topic fits strictly between the aligned edges of the neck.
• Lay the line along the “face” of the product. Treat both parts of the armhole in the same way. Perform a shoulder seam. Process allowances together.
• On the side of the clasp, unscrew them to the front side, and iron. Put the fixing tape on top, bast it and sew in two lines to the edge.
• On the tape sewn onto the back of the top, punch the bottom of the buttons. Tap the top of the buttons on the ribbon on the front
• Process the lower section of the topic, bend the stock to the inside, and. Remove the temporary sewing stitches and the product.

Pattern top with a stand-up collar.

Very beautiful top with a stand, meaning with a stand-up collar.

To pattern this top you will need:
   transverse stretch knit fabric

Details of the cut are as follows:

• Before - 1 part with a fold
• Back - 1 part with a fold.
• Scarf-rack - also 1 with a fold

Description of sewing top with a stand:

• Fold the front and back with the front sides, make side seams.
• Fold and stitch the bottom of the product with a narrow zigzag stitch.
•   unscrew the armhole and the upper cut of the back to the inside and, slightly stretching the fabric, sew on the front side. stitches.
• Fold the scarf details with the front sides. a scarf around the perimeter, leaving a place for stitching to the neck.
• Turn the scarf out and. Before picking up, put between the outer and inner parts of the scarf and stitch. The seam .

Such a T-shirt can be very beautifully decorated with rhinestones, add some stylish brooch or put on a hip belt. I think it’s going to be wonderful :-) Good luck!

Pattern top with a neck "swing".

This is a swing pattern, or rather a top pattern with a “swing” type crown. Very beautiful and stylish, clothes with such a collar are always in trend.

You will need:

• elastic knit fabric
• adhesive pad for knitwear

Details of cut pattern swing:

• 1 part with a fold for the front
• 2 parts for the back
• 1 piece with a fold this strap
• The back cut of the upper back is also 1 part.

Description of the pattern work swing:

• Reinforce the cushioning of the upper cut back and strap.
• Perform a middle seam and tucks on the back.
• Iron tuck depths towards the middle of the back.
• Unscrew the whole-cut top of the front to the face and sew along the sections of the armholes.
• Fold the strap with the front side inwards, along the longitudinal section, twist and iron.
• Unscrew the completely cut edge for the top of the front and the allowances for the armholes.
• Insert the ends of the strap into the upper corners between the allowances. Stitch the product along the armholes from the face to the edge about 5 to 7 mm from it.
•   folded obverse facing the top of the back and back.
• Stitch up the seam allowances. Sew side seams without grabbing.
• Her to the allowances of the side seams and the middle seam and to the depths of the grooves Bend the bottom of the product and sew to the edge, and then after 5 to 7 mm from it.

So, beautifully and not difficult!

A very trendy strapless top. Pattern.

Today I present: a top with no shoulder straps. In my opinion, the model deserves special attention, because it has remained in the trend for more than a year, it looks very romantic and at the same time sexy!

You will need:

• silk stretch
• corrugated chiffon
• rubber band

Details of the cut pattern top strapless:

• Before - from silk-stretch -1 part with a fold.
• And the back is made of corrugated chiffon - 1 part with a fold.
• Top of the top - 2 parts with a fold.

Description for tops strapless tops:

• Cut sections of the front back and top of the top.
•   and make side seams, allowances are needed on both sides.
•   unscrew the cuts to the seamy side, sweep, and stitch along the edge of the treatment
• cut.
•   and finishing gum to the upper part of the product, without violating the folds of the corrugation.
•   a piece of corrugated chiffon along the line of the upper cut of the front and back of the top, starting from the middle of the back and middle of the front.
• top, allowances to work together and iron down. Grind the bottom of the open part of the top of the top with a finishing rubber band. ready product.

Pattern top with straps.

So, today the focus: top with straps. This is a top pattern with straps from a cord. Interesting? Look further.

You will need:

• elastic knit
• lace about 3 cm thick
• 6 plates with washers with an inner diameter of 5 mm

Cut Details:
   Front and back for 1 part with a fold.

Before stitching along the armholes. At the front of the marking, break through the blocks, first place a flap of fabric folded in half on the wrong side.

Pull the front ends of the cords out through the side block at the front armhole, then break into the second block and pull out again through the middle block.

Tie the ends of the cords with a bow. by cutting the front, unscrew it from the inside and gently scribble without touching the washers of the blocks.

Fold the bottom of the product and sew on the front side at a distance of 3 cm.

That’s all, the top with straps turned out, you can already wear it and be irresistible!

Pattern women`s t-shirts.

Good day!! Today is a t-shirt pattern.

A t-shirt is an undoubted element of not only a sports wardrobe, but also with skillful decor and fabric choice, you can sew an excellent version of an evening top according to the usual pattern of a t-shirt. For example, if you decorate your shoulders, we get an original outfit. You can simply, having also received author's decor, or embroider with rhinestones / sequins.

In general, there are many ways, it’s worth a little imagination.

In the classic sports version, of course, a knitted fabric is chosen, but do not forget about the experiments

T-shirt pattern.

Sewing process.

• We connect the shoulder seams, and the sleeve with the armhole.
• We also connect the side seams and at the same time the lower section of the sleeve.
• We process the neck (1 cm hem).
• We process the bottom of the sleeves and t-shirts (hem 2 cm).

You can increase the size of the pattern as follows:

Peplum top pattern

My regards!! Today pattern top with Basques. As without him, because the Basque is an undoubted favorite of this summer, spring, and I have no doubt that the next season as well.

• Let me remind you that the pattern of the skirt with the Basques, as well as a separate article with, as an element of decor in clothes and just a self-sufficient accessory is a belt. Therefore, cutting it out for you is not difficult.

The pattern of the top with the Basques consists of several parts - this is the back / shelf and, in fact, the Basques themselves.

• Here are two options: the top as the base, and the basque “appears” in two versions, depending on the “splendor”, so you can immediately determine its size.

• Sleeves can be sewn to this top, it will also turn out very elegantly.

By the way, you can easily make a lot of options for stylish outfits, if you pair with an ordinary one made of fabric in tone. Thus, we get a dress with a Basques, which in my opinion is a win-win option, and a separate top, a separate skirt, as well as many variations with different other things in your wardrobe.

As you can see, you can be in a trend, dress stylishly, fashionably, elegantly, and not depend on the peculiarities of retail stores.

It’s easy if you know a few “chips”
  1. The top of the top from the inside has a silicone tape.

2. the jersey in the chest is pretty tight

3. The pattern of the back is shorter than the pattern of the shelf.

Now, more details on each of the items + patterns for size 46-48.

Here: the construction of the top for the size of the exhaust gas \u003d 96-98, from \u003d 78, OB \u003d 98-100 cm

actwin, 0,0,1360,742; Untitled - Rhinoceros (Corporate) - Rhino4 05/09/2015, 20:47:41

• Knitwear selection.
    It should not be too stretchy and well-kept in shape. For example, knitwear “oil” is not the best option for the top. I had cotton knitwear of good quality, rather tight, of medium elongation.
• Roll fabric before cutting! Wash in the usual mode, so that there are no surprises after - the knitwear is insidious.
• Calculate the “negative increase” in the chest area.
    To do this, you need to stretch a piece of canvas across and determine a comfortable degree of tension to your exhaust gas measurement 1. Measure over the chest - the centimeter tape passes under the armpits. We need to understand how to “tighten” the top border of the top.
    The fact is that our top will be lightweight, without supporting bones. He has to stay only due to the tension on his chest.
    In the waist and hips, it is enough to reduce your measurements by 2-3 cm
• We cut out the back and the shelf.
    We will have two shelf fit areas.
    Firstly, in the chest area 2-3 cm. So we distribute the lateral tuck on the volume of the chest.
  secondly, in the area of \u200b\u200bthe waist 1-2 cm. So we shorten the back to get rid of wrinkles in the area of \u200b\u200bthe lower back deflection. It is simple and pleasant to fit the knitted fabric. We use the properties of extensibility: first you need to chop the slices, evenly distributing the fit. Then sew the side sections with any knitted stitch (I have a zigzag with a small amplitude of 1.3 mm and a pitch of 2 mm). Hand-tighten the fabric when sewing. All processes are in the photo. I will make a reservation right away: I am not a fan of the stitching technique. In my small workshop I do not plan to buy an expensive ploskoshovny machine. Anyway, I prefer knit processing methods other than industrial ones. Overlock, simple and step zigzag, hidden hand stitches - that's enough. this is NOT wrong! This is sincere and couture). If you prefer special equipment - this is welcome. All markers are different in taste and color.
    I love knitwear, I sew it a lot and often. I advise newcomers not to be afraid of technology). Knitwear certainly has sewing features. But this is so grateful material that having mastered the simple rules, you will love him dearly, like me). By the way, I plan to make a series of articles on knitwear.
• Processing side slices on an overlock. Of course, you can do just overlock 4-thread stitching, but stretching the canvas under the overlock knife while monitoring the direction of the stitch is quite problematic. “Inaccurate somehow” (c).
• The lower and upper sections are processed with overlock stitching.
• Bottom just bend. Whoever likes it — with any knitted stitch or hands. In the photo: the more experience I gain, the more often I use quick-stitch stitches. I do not regret the time for manual work - it pays for the final result.
• first we sew the silicone tape to the upper cut - with elastic stitch, slightly pulling the tape. Then bend the slice. All processes are in the photo.
• The top is ready.

Everyone who is even a little familiar with the basic concepts of fashion knows that in every wardrobe there are basic things. One of these things is a linen-style top.

Its versatility tends to infinity. A silk top is worn with skirts, trousers, jeans, shirts, knitted cardigans, leather jackets, etc. Learning to sew such a top is not at all difficult, even a novice who can only refuel the machine will cope.

The pattern for the top can be downloaded on the Internet, bought, re-shoot from thematic magazines or built on your own. Try retaking from an existing thing.

As a material, silk, soft satin, crepe satin, etc. are ideal. The main thing is that weaving should not stand lumpy, but flow gently.

How to sew a top without an overlock, a master class for beginners

Cut out the details of the top from the fabric: in front, back, grind in front, grind back, shoulder straps (2 pcs).

Tie a knot at the end of the tuck and thread the thread through the thickness of the tuck with a needle. Tuck iron up.

Fold the strap with the front side inwards and stitch along the long side, press down. To twist the strap, you can use the invisible hair.

Iron inverted straps.

Grind the details of the edges one side seam, iron the allowances. On the doubler, completely transfer the part of the facing one to one.

Cut out. Put the stitching from the main fabric on the doubler with the front sides (for doubler, the front side is smooth, and the wrong side is adhesive). Stitch along the bottom cut. Cut the allowance to 3-4 mm. Bend the doubler up and gently iron the allowance, without going beyond its borders. Unscrew the doubler on the wrong side, level the cuts of the edges and glue the doubler with the iron on the wrong side of the top.

If necessary, cut off the excess doubler.

Fold the front and back parts together with the WRONG sides, grind the side seams at a distance of 5 mm from the edge. Iron the seams and iron in any direction. Cut allowances to 3 mm. Turn the top inside out and lay the side seams, hiding the inside allowances. Iron the seam on the back.

Pin the straps to the front so that they are pointing down. Stitch part to grind on the second side seam. Overlay the top with the right sides. Stitch along the entire perimeter, leaving behind not sewn places where straps will be. Turn out and try on the length of the straps. Sew unclosed patches with straps. In sections of the armhole, make incisions so that the seam does not pull.

Lay out the top and hem details in different directions face up. On the side of the grind, lay a stitch 1 mm from the seam, fixing the allowance from the wrong side. Unscrew the seam on the seamy side and iron the seam so that the seam of the seam is not visible from the face.

Tuck the bottom of the top 1 cm and lay a stitch 1 mm from the fold.

Cut the allowance to 2 mm.

Wrap the seam over again and lay the stitch at a distance of 3 mm from the edge, exactly falling into the previous seam.

Well iron each seam of the top.

Not so long ago, lingerie style in clothes quickly burst into women's fashion. This is not to say that this is something completely new and unprecedented. And in the middle of the 19th century, models of dresses made of light cotton fabric with lace that flowed through the body in a free cut were used.

For the first time, our contemporaries, world-famous fashion designers Jean-Paul Gaultier and Versace, used a similar style for dresses in their collections. Only ladies from high society wore such exquisite things at social events.

Now such women are fond of such lightweight fabrics, and a dress or top in linen style with lace can be seen in the wardrobe of any girl with a slender figure. That's very beautiful.

In the article we will consider the color scheme used in such models, get acquainted with the features of the cut, with which they can be combined and give tips on how to sew a dress in a linen style or top.

Style Features

To begin with, we carefully learn how the linen style differs from other models. Firstly, the color scheme is filled only with delicate pastel colors - it is soft pink, the color of champagne, coffee with milk, white, light shades of green and blue. Although the latest fashion trends claim the brightness of colors, and more and more often you can see the top in the linen style of bright emerald, turquoise, even black.

The material is selected light, flowing over the body, fitting all the bends of the female figure. It is silk, chiffon or satin, thin cotton is allowed. Decoration takes place with the help of additional elements from guipure and delicate lace. Although for evening dresses, velvet is often used in such deep colors as dark blue and purple.

Typical styles

It is easy to recognize a dress and top in a lingerie style in appearance, reminiscent of underwear, combinations. Usually use an open style with thin straps. Such things are suitable for girls with a boyish figure, with narrow hips and a slender body. Wearing such things that reveal most of the woman’s body, you need to carefully and wisely. If the chest is large and thin straps can not withstand heaviness, then it is permissible to use silk corsets or separately tailored cups in the linen style.

Also typical for models of a top in a linen style with lace is the presence of an open back and shoulders. The more flaunted the body, the better. But! In each style, you need to adhere to a reasonable measure, otherwise the image from refined will quickly transform into a vulgar one.

Let's start with the classic. Imagine the image of a girl walking into a restaurant in a long dress with delicate lace from flowing fabric on thin straps, she has sandals with stilettos on her legs and a beautiful shiny necklace on her neck. Of course, all the views of men will instantly be focused on her. And if the dress has a corset that fits the chest, then the image is feminine and refined.

For the top in a linen style with lace, there are a lot of options for creating ensembles. It goes well with trousers and shorts, with a skirt and wide harem pants. Even ordinary banal tight jeans with a top look great together.

On cool evenings, you can complement the look with a cardigan, or a jacket made of cashmere or wool.

For evening dress, heel shoes are perfect, it is better to wear stilettos instead of boats. They will look more elegant with a thin fabric. For everyday outfits, jeans, shorts or capris with a light lace top will look great in ballet flats or leather sandals. The clutch will complement the image, because you need to put somewhere the most necessary for a walk.

Lingerie style

We examined the features of the basic models of a free cut with thin straps, let's note the variety of other forms. There are models with brightly defined sewn-in cups, there are narrow-fitting styles of tops or dresses with a corset to the waist line and without it.

Another interesting cut option is a dressing gown that reaches the floor level. There is such a variety of dresses of several styles. For example, a slightly wraparound dress with a deep neckline at the front, exposing most of the legs and chest. Another intriguing style, on the contrary, leaves the back fully open. Such a cut is often used for evening dresses.

The latest innovation that has conquered all the Hollywood stars and has come down to us is a dress-shirt. Outwardly, this style resembles a man’s shirt, only of a greater length. The cut is free and comfortable at home. It seems that the girl at home walked in her boyfriend’s shirt and forgot to take it off in front of the street.

When something new appears in the world of fashion, the prices of innovations are just cosmic. In fact, the difficulty of sewing such products is the insidiousness of silk and chiffon, which tend to stretch. Without the skills to work with such materials and a good sewing machine, it is impossible to sew a neat and beautiful evening dress or silk top.

It is also quite difficult to work with velvet, since it has the ability to crumble, so if you want to have a fashionable summer top or a dress with lace, you can sew it yourself from the cotton fabric to begin with. It is easy to sew a top in a linen style with lace on a pattern, you need to prepare materials for work and carefully consider the proposed pattern of the simplest top with loose fit straps.

Necessary materials

To make a short top, you need to buy half a meter of thin cotton fabric. For edging, select lace to match the fabric, 1.5 meters will be enough. It is also allowed to use lace of a different, contrasting color or standard white.

Some sew straps on their own, folding the fabric, but then the strap becomes rough. You can buy braid, enough 1 meter. For cutting, you need chalk and sharp scissors. For basting, prepare pins and contrasting threads with a needle.

Set up the sewing machine, placing first then you need a regular stitch. Threads need the same color as the material. If the lace is in contrasting shades, then it is better to choose a thread of the color of the edging, as the lace is sewn along the top of the fabric.

Sewing

Sewing a top is easy enough if the fabric is properly cut. If you doubt the specified sizes, you can do it easier. Take the top available in the wardrobe, iron it, carefully lay it out on the fabric and circle it with chalk. When cutting parts with scissors, do not forget that you need to leave allowances for the seams.

Further along the wrong side with an overlock, we sew the edges and grind the details of the pattern with a basting seam manually. Having tried on the top, you can stitch the details already with a machine line. Next, sew the lace around the triangles of the bodice and straps. So the fashionable summer top in linen style with lace is ready. Sewing it is easy. Good luck

Top - a miniature sleeveless T-shirt, often on thin straps. This season, these products have become a real trend. Thanks to the laconic appearance, such a T-shirt looks good not only in a casual look, but also with a business suit. A self-made item will ideally sit on the figure of the owner, to complement her image favorably. Before you sew the top yourself, you need to choose the right pattern. A pre-learned action algorithm will help to avoid errors in the process.

Miniature T-shirts without sleeves are often worn in the warm season, therefore, the material for sewing should be light. A summer knit top will allow the skin to breathe and will absorb moisture well. Models and patterns of such products are distinguished by their simplicity and conciseness. Top for evening outings can be made of silk, viscose. The beach version is sewn from cotton and linen.

Almost any fabric before cutting requires decanting - treatment with steam or water.   This is to prevent shrinkage of the finished product after the first wash. Decating technique depends on the density of matter. As a rule, the fabric should be moistened with warm water and left for several hours, iron after drying. Linen, silk and cotton fabrics are excluded - they only need to be ironed, without soaking.

Hardware

To sew a do-it-yourself top, you will need the basic tools that are used when sewing. For work should prepare:

• sewing machine;
• iron;
• scissors (separately for fabric and for paper);
• centimeter tape;
• pins
• tailor's chalk;
• accessories for decoration (optional);
• threads of two colors.

Beginners should know that any product is sewn with several threads. At the stage of cutting and basting, contrasting ones are taken (for example, black stitches are superimposed on a white fabric). The machine line is given by threads in the color of the material. This is necessary in order to simplify the process of removing stitch stitches.

Pattern top for beginners contains three parts: in front (1 part with a fold) and back (2 parts). For the edging of the collar, a figure 3-4 cm wide (rhombus, rectangle or oval) is drawn, depending on the selected neck type. The length of the element must necessarily correspond to the size of the armhole for the head.

The allowance is 1 cm at all seams in the product, except for the bottom, where it is necessary to leave 3-4 cm.

Necessary measurements

The key to sewing a quality product is correctly taken measurements, regardless of whether simple patterns or complex ones are involved in the work. Basic Rules:

• measurements are taken on underwear;
• the right-handed person measures the right side, and the left-handed person measures the left side, since these parts of the body are more developed;
• a pattern is always half the product, so you must not forget that some measurements must be divided in half (girth of the hips, neck, chest, waist, back).

List of required measurements:

1. Neck circumference. Measured in its lower part, a centimeter tape is laid from the side of the face.
2. Chest circumference. The tape is laid along the line of the shoulder blades and along the most protruding parts of the chest. The model should stand without holding her breath. The tape is attached to the body, but does not press.
3. Front Length Measured from shoulder to waist over protruding parts.
4. Chest height. Length from shoulder to protruding chest.
5. The length of the back. Measured from the bone at the base of the neck to the waist.
6. Length of the product. Measured from the bone at the base of the neck to the end of the desired length of the product.
7. Shoulder length. It is measured in the case when the desired result is a top on wide straps.

It is impossible to take measurements on your own, because the result may be inaccurate. And in the sewing art, any inaccuracy threatens that the product simply does not sit on the model, so it is better to ask someone to help.

You can focus on the table of sizes.

Dimensional sign	42	44	46	48	50	52
Neck circumference, cm	34	34,8	35,6	36,4	37,2	37,8
Chest width cm	32,2	33	33,8	34,8	35,4	36,2
Shoulder circumference, cm	26	27,4	29,2	31	32,4	40,6
Chest circumference, cm	84	88	92	96	100	104
Back width cm	33,6	34,6	35,6	36,6	37,6	38,6
Waist circumference, cm	66	70	74	78	82	86
The length of the back to the waist, cm (including protruding shoulder blades)	41,3	41,4	41,5	41,6	41,7	41,8

Model tailoring steps

Each sleeveless shirt model is individual and requires a special approach to work. Before stitching a summer top, you should study the algorithm of actions in detail. In addition, you need to prepare in advance all the necessary materials and tools.

In lace style with lace

For sewing a linen top, you can choose silk, chiffon, satin, light cotton. The basic rule: the fabric should flow, be light and delicate.

The top in linen style has thin straps.

We sew according to the following algorithm:

1. Cut out a pattern from paper. Under the tucks, it is necessary to sign the names of the parts, as well as mark the front and the wrong side.
2. Fold the fabric in half. Attach the pattern to the fold, secure the paper with needles.
3. Cut elements from the material according to the pattern, leaving 1 cm of seam allowance on each side. You should get two front and two rear parts.
4. These parts must be folded with the wrong side to each other. Sew by joining them on the sides.
5. Straps can be made of ropes in fabric color.
6. Unscrew one part of the product and sew on the straps.
7. Take the second part of the top, turn it inside out, thread the other part into it, pin it with pins on top around the perimeter of the product.
8. Flash the top on a sewing machine.
9. Unscrew the top, pin the lace tape to the bottom of the product, flash it again.

Iron the resulting lace top. It can be washed immediately, but it is better to do this before sewing. Some types of fabric may sit down after washing.

  With the help of a French seam, the details of the front and back are connected
Grinding details are duplicated with thin doubler.
  Stitches are sewn together   Straps
  With the help of a needle, the straps turn out and iron
  The edge and the main part of the top are folded face to face, straps are placed between them. The entire circumference of the top of the top is sewn

Summer Spaghetti Straps

As a rule, patterns of tops for the summer practically do not differ from patterns for clothes of linen style. The only difference is the material. The summer top is sewn like this:

1. Circle any shirt that fits well on the paper and cut it out. In this case, you need to select a material similar to the sample in terms of elasticity.
2. Fold the fabric in half and attach the pattern to the fold. Fasten with pins, cut, not forgetting to leave an allowance for the seam around the perimeter of the entire product (1 cm) and from the bottom (3-4 cm). There should be 4 parts: 2 front and 2 rear.
3. Sew the front and back parts on the sides, putting them on the wrong side to each other. Then drive one part into another, sew along the perimeter from the wrong side.
4. Process the bottom of the top: double fold it at the same distance, flash it on a typewriter.

To create a women's top for the summer season, elastic cotton fabric is suitable. It should be light but durable. It is important that the knit top does not interfere with air exchange.

  The pattern is created directly on the fabric.
  When cutting parts, allowance must be taken into account.
  From the 4 times folded chiffon, two details must be cut
  The bottom of the chiffon parts should be longer
  A total of 4 parts
  Straps poke on the front of the shelf
  It is necessary to retreat from the edge by the amount of allowance
  Chiffon shelf superimposed on top
  The machine line is laid on top
  Carved angle. On the allowances of the armhole, cuts are made
  Stitching. The chiffon allowances are turned away, turned over to the front side and a line is made along the inner chiffon side at a distance of 1 mm
  The upper part is ironed
  The back of the top folds and connects. The straps remain unstressed
  Side seams are joined by a French seam.
  Slices face down
  Allowances are trimmed
  The bottom is twice tucked and hemmed
  Processed bottom
  Straps are inserted in the places intended for them
  After adjusting the length of the straps tease

From an old T-shirt

You can sew a short sports top on your own, even from an old T-shirt that fits in size. You should follow this algorithm:

1. If the shirt has long sleeves, then they must be cut off in a semicircle.
2. The bottom of the product must be cut with scissors (straight line or semicircle). For the decor, the ties can be left on the front of the shirt two stripes from the bottom, the rest is cut short. The strips should be placed as part of the open shirt. Next, they need to be tied in a careless knot. This option for processing the bottom of the product is now popular.

Such a top is suitable for walking or playing sports. Now the trend is light negligence and maximum comfort, so the slices can not be processed on a typewriter.

Simple without a pattern

From an ordinary piece of fabric, you can create anything. But not everyone wants to take measurements and build a pattern. There is a method for sewing an interesting miniature T-shirt without preliminary marking on the fabric.

Sewing Algorithm:

1. Take a rectangular piece of cloth. It should be wider than the shoulders of the model, and the length should be just below the waist. It is better to take silk or satin matter.
2. Lay out the fabric on the table. Bend the upper corners to the middle, a distance of 3-4 cm should remain between them.
3. Secure the bend line on both sides with pins. Trim the bent corners, leaving 1 cm from the location of the fasteners. The top of the product is the neck, it will be located under the neck.
4. Sew cropped folds.
5. Apply a thin elastic band to the neck from the inside, stitch.
6. Then bend the fabric remaining on top of the gum to the wrong side (hide the gum) and stitch it.
7. Trim the bottom of the product to the desired top length.
8. To the bottom of the shirt on the front side, attach a wide elastic band, and flash it from the inside out.
9. Fasten the fasteners on the sides of the elastic elements.
10. Pass the cord into the pocket where the elastic is located. Adjust the length to the size of the neck of the girl.

How to decorate

To make the top unique and interesting, girls strive to decorate it with their own hands. However, it is worth remembering that decor elements should be in harmony with the style and color scheme of the product.

Decoration methods:

1. To sew beads of various sizes on the neck, the closer to the throat, the more beads.
2. The top on the straps can be decorated with a fringe, placing it near the neck.
3. Sew lace ribbons to the straps and bottom of the top.
4. Embroider on the chest or bottom of the product.

Top with thin straps can be easily sewn independently. Following the instructions, even a novice craftswoman can cope with the work. Fashionable and stylish sleeveless T-shirts will be at the peak of popularity for a long time. A linen top, worn under a strict jacket, will add charm to the image, and in combination with a pencil skirt will look elegant and fashionable.

Video